On Mon, 2017-06-19 at 20:49 -0500, Bjorn Helgaas wrote: > [+cc Marc] > > On Tue, Jun 20, 2017 at 08:38:14AM +0800, Ley Foon Tan wrote: > > > > On Mon, 2017-06-19 at 18:47 -0500, Bjorn Helgaas wrote: > > > > > > [+cc Thomas, Ley Foon] > > > > > > On Sat, Jun 17, 2017 at 12:57:38PM -0700, Paul Burton wrote: > > > > > > > > > > > > The driver expects to use hardware IRQ numbers 1 through 4 for > > > > INTX > > > > interrupts, but only creates an IRQ domain of size 4 (ie. IRQ > > > > numbers 0 > > > > through 3). This results in a warning from irq_domain_associate > > > > when it > > > > is called with hwirq=4: > > > > > > > > WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:365 > > > > irq_domain_associate+0x170/0x220 > > > > error: hwirq 0x4 is too large for dummy > > > > Modules linked in: > > > > CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W > > > > 4.12.0-rc5-00126-g19e1b3a10aad-dirty #427 > > > > Stack : 0000000000000000 0000000000000004 0000000000000006 > > > > ffffffff8092c78a > > > > 0000000000000061 ffffffff8018bf60 0000000000000000 > > > > 0000000000000000 > > > > ffffffff8088c287 ffffffff80811d18 a8000000ffc60000 > > > > ffffffff80926678 > > > > 0000000000000001 0000000000000000 ffffffff80887880 > > > > ffffffff80960000 > > > > ffffffff80920000 ffffffff801e6744 ffffffff80887880 > > > > a8000000ffc4f8f8 > > > > 000000000000089c ffffffff8018d260 0000000000010000 > > > > ffffffff80811d18 > > > > 0000000000000000 0000000000000001 0000000000000000 > > > > 0000000000000000 > > > > 0000000000000000 a8000000ffc4f840 0000000000000000 > > > > ffffffff8042cf34 > > > > 0000000000000000 0000000000000000 0000000000000000 > > > > 0000000000040c00 > > > > 0000000000000000 ffffffff8010d1c8 0000000000000000 > > > > ffffffff8042cf34 > > > > ... > > > > Call Trace: > > > > [<ffffffff8010d1c8>] show_stack+0x80/0xa0 > > > > [<ffffffff8042cf34>] dump_stack+0xd4/0x110 > > > > [<ffffffff8013ea98>] __warn+0xf0/0x108 > > > > [<ffffffff8013eb14>] warn_slowpath_fmt+0x3c/0x48 > > > > [<ffffffff80196528>] irq_domain_associate+0x170/0x220 > > > > [<ffffffff80196bf0>] irq_create_mapping+0x88/0x118 > > > > [<ffffffff801976a8>] irq_create_fwspec_mapping+0xb8/0x320 > > > > [<ffffffff80197970>] irq_create_of_mapping+0x60/0x70 > > > > [<ffffffff805d1318>] of_irq_parse_and_map_pci+0x20/0x38 > > > > [<ffffffff8049c210>] pci_fixup_irqs+0x60/0xe0 > > > > [<ffffffff8049cd64>] xilinx_pcie_probe+0x28c/0x478 > > > > [<ffffffff804e8ca8>] platform_drv_probe+0x50/0xd0 > > > > [<ffffffff804e73a4>] driver_probe_device+0x2c4/0x3a0 > > > > [<ffffffff804e7544>] __driver_attach+0xc4/0xd0 > > > > [<ffffffff804e5254>] bus_for_each_dev+0x64/0xa8 > > > > [<ffffffff804e5e40>] bus_add_driver+0x1f0/0x268 > > > > [<ffffffff804e8000>] driver_register+0x68/0x118 > > > > [<ffffffff801001a4>] do_one_initcall+0x4c/0x178 > > > > [<ffffffff808d3ca8>] kernel_init_freeable+0x204/0x2b0 > > > > [<ffffffff80730b68>] kernel_init+0x10/0xf8 > > > > [<ffffffff80106218>] ret_from_kernel_thread+0x14/0x1c > > > > > > > > This patch avoids that warning by creating the legacy IRQ > > > > domain > > > > with > > > > size 5 rather than 4, allowing it to cover the hwirq=4/INTD > > > > case. > > > > > > > > Signed-off-by: Paul Burton <paul.burton@xxxxxxxxxx> > > > > Cc: Bharat Kumar Gogada <bharatku@xxxxxxxxxx> > > > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > > > > Cc: Michal Simek <michal.simek@xxxxxxxxxx> > > > > Cc: Ravikiran Gummaluri <rgummal@xxxxxxxxxx> > > > > Cc: linux-pci@xxxxxxxxxxxxxxx > > > > > > > > --- > > > > > > > > Changes in v5: > > > > - New patch; replacing "PCI: xilinx: Fix INTX irq dispatch". > > > > > > > > Changes in v4: None > > > > Changes in v3: None > > > > Changes in v2: None > > > > > > > > drivers/pci/host/pcie-xilinx.c | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/pci/host/pcie-xilinx.c > > > > b/drivers/pci/host/pcie-xilinx.c > > > > index 2fe2df51f9f8..94c71fb91648 100644 > > > > --- a/drivers/pci/host/pcie-xilinx.c > > > > +++ b/drivers/pci/host/pcie-xilinx.c > > > > @@ -524,7 +524,7 @@ static int > > > > xilinx_pcie_init_irq_domain(struct > > > > xilinx_pcie_port *port) > > > > return -ENODEV; > > > > } > > > > > > > > - port->leg_domain = irq_domain_add_linear(pcie_intc_node, > > > > 4, > > > > + port->leg_domain = irq_domain_add_linear(pcie_intc_node, > > > > 1 + > > > > 4, > > > I don't understand this. Several drivers call > > > irq_domain_add_linear() with > > > a size of 4: > > > > > > dra7xx_pcie_init_irq_domain > > > ks_dw_pcie_host_init > > > advk_pcie_init_irq_domain > > > faraday_pci_setup_cascaded_irq > > > rockchip_pcie_init_irq_domain > > > nwl_pcie_init_irq_domain > > > > > > Only one other in drivers/pci uses a size of 5: > > > > > > altera_pcie_init_irq_domain > > > > > > Why can't we use a size of 4 for all of them? We only have INTA- > > > INTD. Are > > > altera and xilinx missing something to apply an offset from the > > > 0-3 > > > space > > > to the 1-4 space? > > We have the same discussion before in 2016: https://lkml.org/lkml/2 > > 016/ > > 8/30/198 > Thanks for digging that out. I knew we'd discussed this before, but > I > couldn't find it in the archives. I don't think anybody was really > satisfied with the outcome, but we accepted it to make forward > progress. > > > > > This is because legacy interrupt is start with index 1 instead of > > 0. > I'm not buying this. Your argument was that "the hwirq for legacy > interrupts will start at 0x1 to 0x4 (INTA to INTD) and these values > are as per PCIe specification for legacy interrupts. So these cannot > be numbered from 0." > > But all the other drivers I mentioned get along with the 0-3 range > somehow. If there's something different about altera and xilinx that > means they can't use the same solution the others do, I'd like to > know > what it is. I'm not sure those drivers with index 0-3 range tested with 4 legacy interrupts or not. It will not has error until someone requesting 4 legacy interrupts. We see this error when we enabling multi-function endpoint (4 functions). I believe this is not altera or xilinx specific. Regards Ley Foon
