phy_mode was added for switching USB mode purposely as
well as phy_set_mode API. However other types of PHY could
also have some miscellaneous setting/modes need to be
handled. This patch is gonna support this callback for
phy-rockchip-pcie and do some power-saving work there.
Note that we just stuff in some other values other that the
existing phy_mode and convert it in the coressponding driver
instead, otherwise we should extend the phy_mode again which
it doesn't make sense to add in new driver's specificed value.
Overall it looks fine to me as the controller's driver and the
phy's driver are paired so that the caller and the consumer should
be able to keep the value(mode) in consistent.
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
drivers/phy/rockchip/phy-rockchip-pcie.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 6904633..9ffad15 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -255,11 +255,33 @@ static int rockchip_pcie_phy_exit(struct phy *phy)
return 0;
}
+static int rockchip_pcie_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+ struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+ u8 map = (u8)mode;
+ int i;
+
+ for (i = 0; i < PHY_MAX_LANE_NUM; i++) {
+ if (map & BIT(i))
+ continue;
+
+ dev_dbg(&phy->dev, "idling lane %d\n", i);
+ regmap_write(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_laneoff,
+ HIWORD_UPDATE(PHY_LANE_IDLE_OFF,
+ PHY_LANE_IDLE_MASK,
+ PHY_LANE_IDLE_A_SHIFT + i));
+ }
+
+ return 0;
+}
+
static const struct phy_ops ops = {
.init = rockchip_pcie_phy_init,
.exit = rockchip_pcie_phy_exit,
.power_on = rockchip_pcie_phy_power_on,
.power_off = rockchip_pcie_phy_power_off,
+ .set_mode = rockchip_pcie_phy_set_mode,
.owner = THIS_MODULE,
};
--
1.9.1
