From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> Add some resource nodes for clock and reset Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 53 +++++++++++++++++++++++++++---- 1 file changed, 46 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 3983086..f55710a 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -5,6 +5,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/hi3660-clock.h> / { compatible = "hisilicon,hi3660"; @@ -141,18 +142,56 @@ #size-cells = <2>; ranges; - fixed_uart5: fixed_19_2M { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "fixed:uart5"; + crg_ctrl: crg_ctrl@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; }; - uart5: uart@fdf05000 { + crg_rst: crg_rst_controller { + compatible = "hisilicon,hi3660-reset"; + #reset-cells = <2>; + hisi,rst-syscon = <&crg_ctrl>; + }; + + + pctrl: pctrl@e8a09000 { + compatible = "hisilicon,hi3660-pctrl", "syscon"; + reg = <0x0 0xe8a09000 0x0 0x2000>; + #clock-cells = <1>; + }; + + pmuctrl: crg_ctrl@fff34000 { + compatible = "hisilicon,hi3660-pmuctrl", "syscon"; + reg = <0x0 0xfff34000 0x0 0x1000>; + #clock-cells = <1>; + }; + + sctrl: sctrl@fff0a000 { + compatible = "hisilicon,hi3660-sctrl", "syscon"; + reg = <0x0 0xfff0a000 0x0 0x1000>; + #clock-cells = <1>; + }; + + iomcu: iomcu@ffd7e000 { + compatible = "hisilicon,hi3660-iomcu", "syscon"; + reg = <0x0 0xffd7e000 0x0 0x1000>; + #clock-cells = <1>; + + }; + + iomcu_rst: reset { + compatible = "hisilicon,hi3660-reset"; + hisi,rst-syscon = <&iomcu>; + #reset-cells = <2>; + }; + + uart5: serial@fdf05000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xfdf05000 0x0 0x1000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&fixed_uart5 &fixed_uart5>; + clocks = <&crg_ctrl HI3660_CLK_GATE_UART5>, + <&crg_ctrl HI3660_CLK_GATE_UART5>; clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; -- 2.10.2