> -----Original Message----- > From: Bjorn Helgaas [mailto:helgaas@xxxxxxxxxx] > Sent: Tuesday, June 13, 2017 7:49 AM > To: Stefan Schoefegger <stefan.schoefegger@xxxxxxxxxxxxx> > Cc: linux-pci@xxxxxxxxxxxxxxx; Richard Zhu <hongxing.zhu@xxxxxxx>; Arnd > Bergmann <arnd@xxxxxxxx>; open list <linux-kernel@xxxxxxxxxxxxxxx>; > Kishon Vijay Abraham I <kishon@xxxxxx>; Jingoo Han > <jingoohan1@xxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; > moderated list:PCI DRIVER FOR IMX6 <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; > Lucas Stach <l.stach@xxxxxxxxxxxxxx> > Subject: Re: [PATCH v2 1/1] PCI: imx6: Add pcie compliance test option > > On Wed, Jun 07, 2017 at 01:36:11PM +0200, Stefan Schoefegger wrote: > > Link speed must not be limited to gen1 during link test for compliance > > tests > > > > Signed-off-by: Stefan Schoefegger <stefan.schoefegger@xxxxxxxxxxxxx> > > --- > > > > Changes since v1: > > - pci-imx6.c moved to dwc directory > > > > drivers/pci/dwc/Kconfig | 10 ++++++++++ > > drivers/pci/dwc/pci-imx6.c | 21 ++++++++++++--------- > > 2 files changed, 22 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index > > b7e15526d676..b6e9ced5a45d 100644 > > --- a/drivers/pci/dwc/Kconfig > > +++ b/drivers/pci/dwc/Kconfig > > @@ -77,6 +77,16 @@ config PCI_IMX6 > > select PCIEPORTBUS > > select PCIE_DW_HOST > > > > +config PCI_IMX6_COMPLIANCE_TEST > > + bool "Enable pcie compliance tests on imx6" > > + depends on PCI_IMX6 > > + default n > > + help > > + Enables support for pcie compliance test on FSL iMX SoCs. > > + The link speed wouldn't be limited to gen1 when enabled. > > + Enable only during compliance tests, otherwise > > + link detection will fail on some peripherals. > > I'm puzzled about why we would want to merge this patch. It looks like > we're trying to game the system to make the device pass compliance testing > when it isn't really compliant. Is this config option useful to users, or is it only > useful during internal development of iMX SoCs? > [Zhu hongxing] Agree with Bjorn. These modifications shouldn't be merged. They are used for the boards used to pass the PCIe RC certification, when one Standalone external OSC is used as PCIe reference clock source in the boards design. > > config PCIE_SPEAR13XX > > bool "STMicroelectronics SPEAr PCIe controller" > > depends on PCI > > diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c > > index 19a289b8cc94..b0fbe52e25b0 100644 > > --- a/drivers/pci/dwc/pci-imx6.c > > +++ b/drivers/pci/dwc/pci-imx6.c > > @@ -533,15 +533,18 @@ static int imx6_pcie_establish_link(struct > imx6_pcie *imx6_pcie) > > u32 tmp; > > int ret; > > > > - /* > > - * Force Gen1 operation when starting the link. In case the link is > > - * started in Gen2 mode, there is a possibility the devices on the > > - * bus will not be detected at all. This happens with PCIe switches. > > - */ > > - tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR); > > - tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK; > > - tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1; > > - dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp); > > + if (!IS_ENABLED(CONFIG_PCI_IMX6_COMPLIANCE_TEST)) { > > + /* > > + * Force Gen1 operation when starting the link. In case the > > + * link is started in Gen2 mode, there is a possibility the > > + * devices on the bus will not be detected at all. This > > + * happens with PCIe switches. > > + */ > > + tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCR); > > + tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK; > > + tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1; > > + dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp); > > + } > > > > /* Start LTSSM. */ > > if (imx6_pcie->variant == IMX7D) > > -- > > 2.11.0 > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
