I think I fixed the problems below, but I'm a little confused as to why you didn't see them when you built this code. So please double-check https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?h=pci/host-qcom&id=a06cb1bf781789efb54c0f01a49e3011df9592ae and make sure I did it correctly. On Thu, May 25, 2017 at 1:53 AM, kbuild test robot <fengguang.wu@xxxxxxxxx> wrote: > tree: https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/host-qcom > head: ebacba9579462bdc009f4cfc1b605b3ca7a7a1d2 > commit: c48a46bd07da450476175f9081e83db29441d9d3 [1/2] PCI: qcom: Add support for IPQ4019 PCIe controller > config: arm-allmodconfig (attached as .config) > compiler: arm-linux-gnueabi-gcc (Debian 6.1.1-9) 6.1.1 20160705 > reproduce: > wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross > chmod +x ~/bin/make.cross > git checkout c48a46bd07da450476175f9081e83db29441d9d3 > # save the attached .config to linux build tree > make.cross ARCH=arm > > All errors (new ones prefixed by >>): > > drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_get_resources_v3': >>> drivers/pci/dwc/pcie-qcom.c:587:27: error: 'struct qcom_pcie' has no member named 'pp' > struct device *dev = pcie->pp.dev; > ^~ > drivers/pci/dwc/pcie-qcom.c: In function 'qcom_pcie_init_v3': > drivers/pci/dwc/pcie-qcom.c:673:27: error: 'struct qcom_pcie' has no member named 'pp' > struct device *dev = pcie->pp.dev; > ^~ > > vim +587 drivers/pci/dwc/pcie-qcom.c > > 581 return 0; > 582 } > 583 > 584 static int qcom_pcie_get_resources_v3(struct qcom_pcie *pcie) > 585 { > 586 struct qcom_pcie_resources_v3 *res = &pcie->res.v3; > > 587 struct device *dev = pcie->pp.dev; > 588 > 589 res->aux_clk = devm_clk_get(dev, "aux"); > 590 if (IS_ERR(res->aux_clk)) > > --- > 0-DAY kernel test infrastructure Open Source Technology Center > https://lists.01.org/pipermail/kbuild-all Intel Corporation
