Re: [PATCH V8 07/11] iommu: of: Handle IOMMU lookup failure with deferred probing or error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sricharan,

On Wednesday 03 May 2017 15:54:59 Sricharan R wrote:
> On 5/3/2017 3:24 PM, Robin Murphy wrote:
> > On 02/05/17 19:35, Geert Uytterhoeven wrote:
> >> On Fri, Feb 3, 2017 at 4:48 PM, Sricharan R wrote:
> >>> From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >>> 
> >>> Failures to look up an IOMMU when parsing the DT iommus property need to
> >>> be handled separately from the .of_xlate() failures to support deferred
> >>> probing.
> >>> 
> >>> The lack of a registered IOMMU can be caused by the lack of a driver for
> >>> the IOMMU, the IOMMU device probe not having been performed yet, having
> >>> been deferred, or having failed.
> >>> 
> >>> The first case occurs when the device tree describes the bus master and
> >>> IOMMU topology correctly but no device driver exists for the IOMMU yet
> >>> or the device driver has not been compiled in. Return NULL, the caller
> >>> will configure the device without an IOMMU.
> >>> 
> >>> The second and third cases are handled by deferring the probe of the bus
> >>> master device which will eventually get reprobed after the IOMMU.
> >>> 
> >>> The last case is currently handled by deferring the probe of the bus
> >>> master device as well. A mechanism to either configure the bus master
> >>> device without an IOMMU or to fail the bus master device probe depending
> >>> on whether the IOMMU is optional or mandatory would be a good
> >>> enhancement.
> >>> 
> >>> Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> >>> Signed-off-by: Laurent Pichart
> >>> <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> >>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> >> 
> >> This patch broke Renesas R-Car Gen3 platforms in renesas-drivers.
> >> As the IOMMU nodes in DT are not yet enabled, all devices having iommus
> >> properties in DT now fail to probe.
> > 
> > How exactly do they fail to probe? Per d7b0558230e4, if there are no ops
> > registered then they should merely defer until we reach the point of
> > giving up and ignoring the IOMMU. Is it just that you have no other
> > late-probing drivers or post-init module loads to kick the deferred
> > queue after that point? I did try to find a way to explicitly kick it
> > from a suitably late initcall, but there didn't seem to be any obvious
> > public interface - anyone have any suggestions?
> > 
> > I think that's more of a general problem with the probe deferral
> > mechanism itself (I've seen the same thing happen with some of the
> > CoreSight stuff on Juno due to the number of inter-component
> > dependencies) rather than any specific fault of this series.
> 
> I was thinking of an additional check like below to avoid the
> situation ?
> 
> From 499b6e662f60f23740b8880882b0a16f16434501 Mon Sep 17 00:00:00 2001
> From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> Date: Wed, 3 May 2017 13:16:59 +0530
> Subject: [PATCH] iommu: of: Fix check for returning EPROBE_DEFER
> 
> While returning EPROBE_DEFER for iommu masters
> take in to account of iommu nodes that could be
> marked in DT as 'status=disabled', in which case
> simply return NULL and let the master's probe
> continue rather than deferring.
> 
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> ---
>  drivers/iommu/of_iommu.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> index 9f44ee8..e6e9bec 100644
> --- a/drivers/iommu/of_iommu.c
> +++ b/drivers/iommu/of_iommu.c
> @@ -118,6 +118,7 @@ static bool of_iommu_driver_present(struct device_node
> *np)
> 
>         ops = iommu_ops_from_fwnode(fwnode);
>         if ((ops && !ops->of_xlate) ||
> +           !of_device_is_available(iommu_spec->np) ||
>             (!ops && !of_iommu_driver_present(iommu_spec->np)))
>                 return NULL;

This looks good to me, but won't be enough. The ipmmu-vmsa driver in v4.12-rc1 
doesn't call iommu_device_register() and thus won't be found by 
iommu_ops_from_fwnode(). Furthermore, it doesn't IOMMU_OF_DECLARE(), and thus 
will always be considered as absent.

I agree that the ipmmu-vmsa driver needs to be fixed, but it would have been 
nice to check existing IOMMU drivers before merging this patch series...

> >> This can be fixed by either:
> >>   - Disabling CONFIG_IPMMU_VMSA, or
> >>   - Reverting commit 7b07cbefb68d486f (but keeping "int ret = 0;").
> >> 
> >> Note that this was a bit hard to investigate, as R-Car Gen3 support
> >> wasn't upstreamed yet, so bisection pointed to a merge commit.

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux