>-----Original Message----- >From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx] >Sent: Thursday, May 11, 2017 11:21 PM >To: Cheng, Collins >Cc: Bjorn Helgaas; linux-pci@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; >Deucher, Alexander; Zytaruk, Kelly >Subject: Re: [PATCH] PCI: Make SR-IOV capable GPU working on the SR-IOV >incapable platform > >On Fri, 12 May 2017 02:50:32 +0000 >"Cheng, Collins" <Collins.Cheng@xxxxxxx> wrote: > >> Hi Helgaas, >> >> Some AMD GPUs have hardware support for graphics SR-IOV. >> If the SR-IOV capable GPU is plugged into the SR-IOV incapable >> platform. It would cause a problem on PCI resource allocation in >> current Linux kernel. >> >> Therefore in order to allow the PF (Physical Function) device of >> SR-IOV capable GPU to work on the SR-IOV incapable platform, it is >> required to verify conditions for initializing BAR resources on AMD >> SR-IOV capable GPUs. >> >> If the device is an AMD graphics device and it supports SR-IOV it will >> require a large amount of resources. >> Before calling sriov_init() must ensure that the system BIOS also >> supports SR-IOV and that system BIOS has been able to allocate enough >> resources. >> If the VF BARs are zero then the system BIOS does not support SR-IOV >> or it could not allocate the resources and this platform will not >> support AMD graphics SR-IOV. >> Therefore do not call sriov_init(). >> If the system BIOS does support SR-IOV then the VF BARs will be >> properly initialized to non-zero values. >> >> Below is the patch against to Kernel 4.8 & 4.9. Please review. >> >> I checked the drivers/pci/quirks.c, it looks the workarounds/fixes in >> quirks.c are for specific devices and one or more device ID are >> defined for the specific devices. However my patch is for all AMD >> SR-IOV capable GPUs, that includes all existing and future AMD server GPUs. >> So it doesn't seem like a good fit to put the fix in quirks.c. > > >Why is an AMD graphics card unique here? Doesn't sriov_init() always need to be >able to deal with devices of any type where the BIOS hasn't initialized the SR-IOV >capability? Some SR-IOV devices can fit their VFs within a minimum bridge >aperture, most cannot. I don't understand why the VF resource requirements >being exceptionally large dictates that they receive special handling. Thanks, > >Alex > Hi Alex, Many System Bios's are problematic in that they don't know how to fully support SRIOV. Up until recently SRIOV devices typically used a small amount of resources, such as a NIC. The AMD SRIOV GPU uses significant resources and many SBios' cannot handle this properly. The faulty SBios will attempt to initialize, run out of resources and not indicate any error. Even though we are not enabling SRIOV on these platforms this prevents us from running our SRIOV GPUs in non-SRIOV mode on these platforms. Outward looking there is no indication that the SBios had any problems and the capability is set. We have been able to detect these problematic SBios by noticing that they don't initialize our BARs as we expect them to be initialized. If you have an alternative solution I would love to hear about it. Thanks, Kelly >> Signed-off-by: Collins Cheng <collins.cheng@xxxxxxx> >> --- >> drivers/pci/iov.c | 63 >> ++++++++++++++++++++++++++++++++++++++++++++++++++++--- >> 1 file changed, 60 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index >> e30f05c..e4f1405 100644 >> --- a/drivers/pci/iov.c >> +++ b/drivers/pci/iov.c >> @@ -523,6 +523,45 @@ static void sriov_restore_state(struct pci_dev *dev) >> msleep(100); >> } >> >> +/* >> + * pci_vf_bar_valid - check if VF BARs have resource allocated >> + * @dev: the PCI device >> + * @pos: register offset of SR-IOV capability in PCI config space >> + * Returns true any VF BAR has resource allocated, false >> + * if all VF BARs are empty. >> + */ >> +static bool pci_vf_bar_valid(struct pci_dev *dev, int pos) { >> + int i; >> + u32 bar_value; >> + u32 bar_size_mask = ~(PCI_BASE_ADDRESS_SPACE | >> + PCI_BASE_ADDRESS_MEM_TYPE_64 | >> + PCI_BASE_ADDRESS_MEM_PREFETCH); >> + >> + for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { >> + pci_read_config_dword(dev, pos + PCI_SRIOV_BAR + i * 4, >&bar_value); >> + if (bar_value & bar_size_mask) >> + return true; >> + } >> + >> + return false; >> +} >> + >> +/* >> + * is_amd_display_adapter - check if it is an AMD/ATI GPU device >> + * @dev: the PCI device >> + * >> + * Returns true if device is an AMD/ATI display adapter, >> + * otherwise return false. >> + */ >> + >> +static bool is_amd_display_adapter(struct pci_dev *dev) { >> + return (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) && >> + (dev->vendor == PCI_VENDOR_ID_ATI || >> + dev->vendor == PCI_VENDOR_ID_AMD)); } >> + >> /** >> * pci_iov_init - initialize the IOV capability >> * @dev: the PCI device >> @@ -537,9 +576,27 @@ int pci_iov_init(struct pci_dev *dev) >> return -ENODEV; >> >> pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); >> - if (pos) >> - return sriov_init(dev, pos); >> - >> + if (pos) { >> + /* >> + * If the device is an AMD graphics device and it supports >> + * SR-IOV it will require a large amount of resources. >> + * Before calling sriov_init() must ensure that the system >> + * BIOS also supports SR-IOV and that system BIOS has been >> + * able to allocate enough resources. >> + * If the VF BARs are zero then the system BIOS does not >> + * support SR-IOV or it could not allocate the resources >> + * and this platform will not support AMD graphics SR-IOV. >> + * Therefore do not call sriov_init(). >> + * If the system BIOS does support SR-IOV then the VF BARs >> + * will be properly initialized to non-zero values. >> + */ >> + if (is_amd_display_adapter(dev)) { >> + if (pci_vf_bar_valid(dev, pos)) >> + return sriov_init(dev, pos); >> + } else { >> + return sriov_init(dev, pos); >> + } >> + } >> return -ENODEV; >> } >>
