On Mon, May 08, 2017 at 06:55:36PM +0100, Lorenzo Pieralisi wrote: > On Mon, May 08, 2017 at 06:34:08PM +0200, Lucas Stach wrote: > > Am Montag, den 08.05.2017, 17:02 +0200 schrieb Peter Senna Tschudin: > > > Hello Kishon, > > > > > > Our iMX6 hardware (imx6q-b850v3.dts) is not booting with latest > > > linux-next and I could bisect until: > > > > > > commit 442ec4c04d1235f8c664a74004dae54a7a574d18 > > > Author: Kishon Vijay Abraham I <kishon@xxxxxx> > > > Date: Wed Feb 15 18:48:14 2017 +0530 > > > > > > PCI: dwc: all: Split struct pcie_port into host-only and core structures > > > > > > Which seem to be causing our issues. Our device (imx6q-b850v3.dts) boots > > > fine with 4.10, and also boots if we disable pcie with: > > > > Are you sure about this bisect? It seems more likely that the secondary > > bus scanning goes wrong. It seems Lorenzo Pieralisi's cfg space > > non-posting patches landed in next, so the root cause of this might just > > be the driver hooking the wrong fault code now. > > > > Async and synchronous aborts are different fault codes on ARM. Can you > > see of removing the "16 +" in hook_fault_code() in > > drivers/pci/dwc/pci-imx6.c fixes this issue? > > You can also s/pci_remap_cfgspace/ioremap in pcie-designware-host.c > to see if my patches are the issue, it is quite a mechanical change. No change. Exactly same issue, but I noticed that devm_pci_remap_cfgspace() is called twice for the same device, can this be a problem? ... [ 0.505069] OF: PCI: host bridge /soc/pcie@1ffc000 ranges: [ 0.510586] OF: PCI: IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 0.516474] OF: PCI: MEM 0x01000000..0x01efffff -> 0x01000000 [ 0.522420] imx6q-pcie 1ffc000.pcie: devm_pci_remap_cfgspace() [ 0.528656] imx6q-pcie 1ffc000.pcie: devm_pci_remap_cfgspace() ...
