On 04/28/2017 01:11 AM, Jon Masters wrote: > On 04/27/2017 08:54 PM, Khuong Dinh wrote: >> From: Khuong Dinh <kdinh@xxxxxxx> >> >> This patch makes pci-xgene-msi driver ACPI-aware and provides >> MSI capability for X-Gene v1 PCIe controllers in ACPI boot mode. >> >> Signed-off-by: Khuong Dinh <kdinh@xxxxxxx> >> Signed-off-by: Duc Dang <dhdang@xxxxxxx> >> Acked-by: Marc Zyngier <marc.zyngier@xxxxxxx> > > Thanks. Currently testing. Will review and followup shortly. Attaching boot logs before and after. I tested with an Intel e1000. Before the patch I get fallback interrupts. Afterward, I get X-Gene MSI interrupts working. Please followup with answers to Marc's question about how you propose to guarantee boottime ordering of binding. I urgently require that AppliedMicro complete upstreaming of this. It should have been upstream a year ago. You're not the only ones with patches like this left around - I'm coming for everyone else, too. Tested-by: Jon Masters <jcm@xxxxxxxxxxxxxx>
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-rc8.xgene_msix1+ (root@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-14) (GCC) ) #1 SMP Fri Apr 28 04:44:20 EDT 2017 [ 0.000000] Boot CPU: AArch64 Processor [500f0001] [ 0.000000] earlycon: uart8250 at MMIO32 0x000000001c020000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.40 by X-Gene Mustang Board EFI Aug 19 2016 18:02:24 [ 0.000000] efi: ACPI=0x43fa82d000 ACPI 2.0=0x43fa82d014 SMBIOS 3.0=0x43fa82b000 ESRT=0x43ff053d18 [ 0.000000] esrt: Reserving ESRT space from 0x00000043ff053d18 to 0x00000043ff053d78. [ 0.000000] cma: Reserved 512 MiB at 0x00000040e0000000 [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000043FA82D014 000024 (v02 APM ) [ 0.000000] ACPI: XSDT 0x00000043FA82C0E8 000084 (v01 APM XGENE 00000003 01000013) [ 0.000000] ACPI: FACP 0x00000043FA822000 00010C (v05 APM XGENE 00000003 INTL 20140724) [ 0.000000] ACPI: DSDT 0x00000043FA823000 005837 (v05 APM APM88xxx 00000001 INTL 20140724) [ 0.000000] ACPI: DBG2 0x00000043FA829000 0000AA (v00 APMC0D XGENEDBG 00000000 INTL 20140724) [ 0.000000] ACPI: GTDT 0x00000043FA820000 000060 (v02 APM XGENE 00000001 INTL 20140724) [ 0.000000] ACPI: MCFG 0x00000043FA81F000 00003C (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: SPCR 0x00000043FA81E000 000050 (v02 APMC0D XGENESPC 00000000 INTL 20140724) [ 0.000000] ACPI: SSDT 0x00000043FA81D000 00002D (v02 APM XGENE 00000001 INTL 20140724) [ 0.000000] ACPI: BERT 0x00000043FA81C000 000030 (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: HEST 0x00000043FA81B000 0002A8 (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: APIC 0x00000043FA81A000 0002A4 (v03 APM XGENE 00000003 01000013) [ 0.000000] ACPI: SSDT 0x00000043FA819000 000063 (v02 REDHAT MACADDRS 00000001 01000013) [ 0.000000] ACPI: SSDT 0x00000043FA818000 000032 (v02 REDHAT UARTCLKS 00000001 01000013) [ 0.000000] ACPI: PCCT 0x00000043FA817000 000300 (v01 APM XGENE 00000003 01000013) [ 0.000000] ACPI: SPCR: console: uart,mmio,0x1c020000,115200 [ 0.000000] ACPI: NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000043ffffffff] [ 0.000000] NUMA: Adding memblock [0x4000000000 - 0x40001fffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x4000200000 - 0x43fa7cffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43fa7d0000 - 0x43faa1ffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43faa20000 - 0x43ff9cffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43ff9d0000 - 0x43ffa1ffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43ffa20000 - 0x43ffffffff] on node 0 [ 0.000000] NUMA: Initmem setup node 0 [mem 0x4000000000-0x43ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x43ffffe200-0x43ffffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000004000000000-0x00000040ffffffff] [ 0.000000] Normal [mem 0x0000004100000000-0x00000043ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000004000000000-0x00000040001fffff] [ 0.000000] node 0: [mem 0x0000004000200000-0x00000043fa7cffff] [ 0.000000] node 0: [mem 0x00000043fa7d0000-0x00000043faa1ffff] [ 0.000000] node 0: [mem 0x00000043faa20000-0x00000043ff9cffff] [ 0.000000] node 0: [mem 0x00000043ff9d0000-0x00000043ffa1ffff] [ 0.000000] node 0: [mem 0x00000043ffa20000-0x00000043ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000004000000000-0x00000043ffffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65536 pages, LIFO batch:1 [ 0.000000] Normal zone: 192 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:1 [ 0.000000] psci: is not implemented in ACPI. [ 0.000000] percpu: Embedded 3 pages/cpu @ffff8003ffdf0000 s124312 r8192 d64104 u196608 [ 0.000000] pcpu-alloc: s124312 r8192 d64104 u196608 alloc=3*65536 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 261888 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc8.xgene_msix1+ root=/dev/mapper/rhelp_dhcp--171-root ro crashkernel=auto rd.lvm.lv=rhelp_dhcp-171/root rd.lvm.lv=rhelp_dhcp-171/swap LANG=en_US.UTF-8 acpi=force earlycon=uart8250,mmio32,0x1c020000 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] software IO TLB [mem 0x40dbff0000-0x40dfff0000] (64MB) mapped at [ffff8000dbff0000-ffff8000dffeffff] [ 0.000000] Memory: 16109888K/16777216K available (7420K kernel code, 1354K rwdata, 3200K rodata, 1216K init, 7286K bss, 143040K reserved, 524288K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff0000087c0000 ( 7424 KB) [ 0.000000] .rodata : 0xffff0000087c0000 - 0xffff000008af0000 ( 3264 KB) [ 0.000000] .init : 0xffff000008af0000 - 0xffff000008c20000 ( 1216 KB) [ 0.000000] .data : 0xffff000008c20000 - 0xffff000008d72a00 ( 1355 KB) [ 0.000000] .bss : 0xffff000008d72a00 - 0xffff0000094902d4 ( 7287 KB) [ 0.000000] fixed : 0xffff7fdffe7d0000 - 0xffff7fdffec00000 ( 4288 KB) [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum) [ 0.000000] 0xffff7fe000000000 - 0xffff7fe001000000 ( 16 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800400000000 ( 16384 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: No distributor detected at @ffff000008050000, giving up [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.008382] Console: colour dummy device 80x25 [ 0.013031] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000) [ 0.023774] pid_max: default: 32768 minimum: 301 [ 0.028553] ACPI: Core revision 20170119 [ 0.036208] ACPI Error: Method parse/execution failed [\_SB.ET00._STA] (Node ffff8003c0195c08), AE_CTRL_PARSE_CONTINUE (20170119/psparse-543) [ 0.049249] ACPI Error: Invalid zero thread count in method (20170119/dsmethod-790) [ 0.057204] ACPI Error: Invalid OwnerId: 0x00 (20170119/utownerid-186) [ 0.063972] ACPI Error: Method parse/execution failed [\_SB.ET01._STA] (Node ffff8003c0195eb0), AE_CTRL_PARSE_CONTINUE (20170119/psparse-543) [ 0.077125] ACPI Error: Invalid zero thread count in method (20170119/dsmethod-790) [ 0.084966] ACPI Error: Invalid OwnerId: 0x00 (20170119/utownerid-186) [ 0.092086] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.098656] Security Framework initialized [ 0.102953] SELinux: Initializing. [ 0.106548] SELinux: Starting in permissive mode [ 0.106747] Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes) [ 0.116984] Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes) [ 0.125658] Mount-cache hash table entries: 32768 (order: 2, 262144 bytes) [ 0.132758] Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes) [ 0.140711] ftrace: allocating 26814 entries in 7 pages [ 0.205140] ASID allocator initialised with 65536 entries [ 0.211274] Remapping and enabling EFI services. [ 0.216029] EFI remap 0x0000000010510000 => 0000000020000000 [ 0.222058] EFI remap 0x0000000010548000 => 0000000020018000 [ 0.228081] EFI remap 0x0000000017000000 => 0000000020020000 [ 0.234066] EFI remap 0x000000001c025000 => 0000000020035000 [ 0.240084] UEFI Runtime regions are not aligned to 64 KB -- buggy firmware? [ 0.240089] ------------[ cut here ]------------ [ 0.252134] WARNING: CPU: 0 PID: 1 at arch/arm64/kernel/efi.c:34 efi_create_mapping+0x4c/0x104 [ 0.261010] Modules linked in: [ 0.265699] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc8.xgene_msix1+ #1 [ 0.273313] Hardware name: APM X-Gene Mustang board (DT) [ 0.278750] task: ffff8003c1bc0000 task.stack: ffff8003c1c00000 [ 0.284827] PC is at efi_create_mapping+0x4c/0x104 [ 0.289772] LR is at efi_create_mapping+0x4c/0x104 [ 0.294664] pc : [<ffff000008af51f0>] lr : [<ffff000008af51f0>] pstate: 60000045 [ 0.302261] sp : ffff8003c1c03d20 [ 0.305710] x29: ffff8003c1c03d20 x28: 0000000000000000 [ 0.311183] x27: ffff000008c53000 x26: ffff000008d429c8 [ 0.316639] x25: ffff000008d42000 x24: 0000000000000000 [ 0.322102] x23: ffff000008a4c8f0 x22: ffff000008c60000 [ 0.327600] x21: ffff000008c53000 x20: ffff000008d429c8 [ 0.333038] x19: ffff8003f96ab348 x18: 000000003eca74e7 [ 0.338485] x17: 0000000000000000 x16: 0000000000000000 [ 0.343992] x15: ffff000008c53000 x14: 000000004e2b17ac [ 0.349464] x13: ffff0000089ca500 x12: 0000000000040b00 [ 0.354988] x11: ffff8003c1c039e0 x10: ffff8003c1c039e0 [ 0.360435] x9 : 0000000000000073 x8 : 6620796767756220 [ 0.365898] x7 : 2d2d20424b203436 x6 : ffff000009274718 [ 0.371362] x5 : ffff8003ffdf7530 x4 : 0000000000000000 [ 0.376834] x3 : 0000000000000000 x2 : 0000000000040b00 [ 0.382316] x1 : 0000000000040b00 x0 : 0000000000000040 [ 0.389363] ---[ end trace 4a6935def63e1e16 ]--- [ 0.394126] Call trace: [ 0.396626] Exception stack(0xffff8003c1c03b30 to 0xffff8003c1c03c60) [ 0.403246] 3b20: ffff8003f96ab348 0001000000000000 [ 0.411302] 3b40: ffff8003c1c03d20 ffff000008af51f0 0000000060000045 ffff000008d429c8 [ 0.419331] 3b60: 0000000000000000 0000000000000000 ffff8003c1c03d20 ffff8003c1c03d20 [ 0.427377] 3b80: ffff8003c1c03ce0 00000000ffffffc8 ffff8003c1c03be0 ffff00000812f6b8 [ 0.435449] 3ba0: ffff000008c53000 00000000ffffffc8 ffff8003c1c03c00 ffff0000089be038 [ 0.443487] 3bc0: ffff8003c1c03d20 ffff8003c1c03d20 ffff8003c1c03ce0 00000000ffffffc8 [ 0.451585] 3be0: ffff8003c1c03c70 0000000000040b00 0000000000000040 0000000000040b00 [ 0.459666] 3c00: 0000000000040b00 0000000000000000 0000000000000000 ffff8003ffdf7530 [ 0.467729] 3c20: ffff000009274718 2d2d20424b203436 6620796767756220 0000000000000073 [ 0.475784] 3c40: ffff8003c1c039e0 ffff8003c1c039e0 0000000000040b00 ffff0000089ca500 [ 0.483840] [<ffff000008af51f0>] efi_create_mapping+0x4c/0x104 [ 0.489858] [<ffff000008b3db98>] arm_enable_runtime_services+0x154/0x238 [ 0.496817] [<ffff000008083698>] do_one_initcall+0x54/0x15c [ 0.502634] [<ffff000008af0d18>] kernel_init_freeable+0xe4/0x25c [ 0.508816] [<ffff0000087ae430>] kernel_init+0x18/0x108 [ 0.514202] [<ffff0000080833c0>] ret_from_fork+0x10/0x50 [ 0.519621] EFI remap 0x00000043fa7df000 => 000000002004f000 [ 0.525659] EFI remap 0x00000043fa82e000 => 000000002006e000 [ 0.531673] EFI remap 0x00000043ff9d6000 => 0000000020266000 [ 0.537700] EFI remap 0x00000043ff9ea000 => 000000002027a000 [ 0.543899] smp: Bringing up secondary CPUs ... [ 0.548738] Detected PIPT I-cache on CPU1 [ 0.548766] CPU1: Booted secondary processor [500f0001] [ 0.548987] Detected PIPT I-cache on CPU2 [ 0.549008] CPU2: Booted secondary processor [500f0001] [ 0.549225] Detected PIPT I-cache on CPU3 [ 0.549239] CPU3: Booted secondary processor [500f0001] [ 0.549432] Detected PIPT I-cache on CPU4 [ 0.549452] CPU4: Booted secondary processor [500f0001] [ 0.549653] Detected PIPT I-cache on CPU5 [ 0.549667] CPU5: Booted secondary processor [500f0001] [ 0.549861] Detected PIPT I-cache on CPU6 [ 0.549882] CPU6: Booted secondary processor [500f0001] [ 0.550086] Detected PIPT I-cache on CPU7 [ 0.550100] CPU7: Booted secondary processor [500f0001] [ 0.550142] smp: Brought up 1 node, 8 CPUs [ 0.621892] SMP: Total of 8 processors activated. [ 0.626806] CPU features: detected feature: 32-bit EL0 Support [ 0.632944] CPU: All CPU(s) started at EL2 [ 0.637984] devtmpfs: initialized [ 0.641749] SMBIOS 3.0.0 present. [ 0.645224] DMI: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.15 Aug 19 2016 [ 0.654642] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.664967] futex hash table entries: 2048 (order: 2, 262144 bytes) [ 0.671981] pinctrl core: initialized pinctrl subsystem [ 0.677705] NET: Registered protocol family 16 [ 0.682714] cpuidle: using governor menu [ 0.686960] Detected 8 PCC Subspaces [ 0.690784] Registering PCC driver as Mailbox controller [ 0.696410] vdso: 2 pages (1 code @ ffff0000087e0000, 1 data @ ffff000008c40000) [ 0.704152] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers. [ 0.713765] DMA: preallocated 256 KiB pool for atomic allocations [ 0.720154] ACPI: bus type PCI registered [ 0.724382] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.731202] Serial: AMBA PL011 UART driver [ 0.737465] HugeTLB registered 512 MB page size, pre-allocated 0 pages [ 0.744898] ACPI: Added _OSI(Module Device) [ 0.749274] ACPI: Added _OSI(Processor Device) [ 0.753882] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.758804] ACPI: Added _OSI(Processor Aggregator Device) [ 0.773904] ACPI: Interpreter enabled [ 0.777753] ACPI: Using GIC for interrupt routing [ 0.782685] ACPI: MCFG table detected, 1 entries [ 0.787684] HEST: Table parsing has been initialized. [ 0.795411] ACPI: Power Resource [SCVR] (on) [ 0.830232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.836749] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.845539] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.853915] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xe0d0000000-0xe0dfffffff] for [bus 00-ff] with xgene_v1_pcie_ecam_ops [ 0.866664] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0xe0d0000000-0xe0dfffffff] not reserved in ACPI namespace [ 0.877881] acpi PNP0A08:00: ECAM at [mem 0xe0d0000000-0xe0dfffffff] for [bus 00-ff] [ 0.886116] Remapped I/O 0x000000e010000000 to [io 0x0000-0xffff window] [ 0.893327] PCI host bridge to bus 0000:00 [ 0.897628] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window] (bus address [0x10000000-0x1000ffff]) [ 0.908283] pci_bus 0000:00: root bus resource [mem 0xe040000000-0xe07fffffff window] (bus address [0x40000000-0x7fffffff]) [ 0.919920] pci_bus 0000:00: root bus resource [mem 0xf000000000-0xffffffffff window] [ 0.928114] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.933821] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400 [ 0.933899] pci 0000:00:00.0: supports D1 D2 [ 0.934059] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 [ 0.934092] pci 0000:01:00.0: reg 0x10: [mem 0xe040080000-0xe04009ffff] [ 0.934108] pci 0000:01:00.0: reg 0x14: [mem 0xe040000000-0xe04007ffff] [ 0.934125] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 0.934141] pci 0000:01:00.0: reg 0x1c: [mem 0xe0400a0000-0xe0400a3fff] [ 0.934186] pci 0000:01:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 0.934326] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.963877] pci 0000:00:00.0: BAR 14: assigned [mem 0xe040000000-0xe0400fffff] [ 0.971433] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.977908] pci 0000:01:00.0: BAR 1: assigned [mem 0xe040000000-0xe04007ffff] [ 0.985417] pci 0000:01:00.0: BAR 6: assigned [mem 0xe040080000-0xe0400bffff pref] [ 0.993304] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0400c0000-0xe0400dffff] [ 1.000812] pci 0000:01:00.0: BAR 3: assigned [mem 0xe0400e0000-0xe0400e3fff] [ 1.008298] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 1.014701] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.019893] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.026276] pci 0000:00:00.0: bridge window [mem 0xe040000000-0xe0400fffff] [ 1.034419] vgaarb: loaded [ 1.037393] SCSI subsystem initialized [ 1.041366] libata version 3.00 loaded. [ 1.041403] ACPI: bus type USB registered [ 1.045616] usbcore: registered new interface driver usbfs [ 1.051373] usbcore: registered new interface driver hub [ 1.056947] usbcore: registered new device driver usb [ 1.062355] Registered efivars operations [ 1.066820] NetLabel: Initializing [ 1.070418] NetLabel: domain hash size = 128 [ 1.074997] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.080980] NetLabel: unlabeled traffic allowed by default [ 1.086945] clocksource: Switched to clocksource arch_sys_counter [ 1.111811] VFS: Disk quotas dquot_6.6.0 [ 1.115980] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 1.123569] pnp: PnP ACPI init [ 1.127405] pnp: PnP ACPI: found 0 devices [ 1.134249] NET: Registered protocol family 2 [ 1.139069] TCP established hash table entries: 131072 (order: 4, 1048576 bytes) [ 1.147156] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) [ 1.154513] TCP: Hash tables configured (established 131072 bind 65536) [ 1.161541] UDP hash table entries: 8192 (order: 2, 262144 bytes) [ 1.168029] UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes) [ 1.175030] NET: Registered protocol family 1 [ 1.179607] PCI: CLS 64 bytes, default 128 [ 1.179708] Unpacking initramfs... [ 1.863109] Freeing initrd memory: 32640K [ 1.867699] kvm [1]: 8-bit VMID [ 1.870944] kvm [1]: IDMAP page: 40009b7000 [ 1.875301] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 1.881276] kvm [1]: Hyp mode initialized successfully [ 1.886624] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 1.895748] kvm [1]: vgic-v2@780cf000 [ 1.899646] kvm [1]: vgic interrupt IRQ1 [ 1.903757] kvm [1]: virtual timer IRQ4 [ 1.923421] audit: initializing netlink subsys (disabled) [ 1.929159] audit: type=2000 audit(1.470:1): state=initialized audit_enabled=0 res=1 [ 1.929303] Initialise system trusted keyrings [ 1.929373] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 1.931445] zbud: loaded [ 1.931829] SELinux: Registering netfilter hooks [ 2.011199] NET: Registered protocol family 38 [ 2.015847] Key type asymmetric registered [ 2.020145] Asymmetric key parser 'x509' registered [ 2.025283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.033081] io scheduler noop registered [ 2.037167] io scheduler deadline registered (default) [ 2.042536] io scheduler cfq registered [ 2.046565] io scheduler mq-deadline registered [ 2.051474] atomic64_test: passed [ 2.055189] xgene-gpio APMC0D14:00: X-Gene GPIO driver registered. [ 2.062003] pcieport 0000:00:00.0: AER enabled with IRQ 83 [ 2.067787] pcieport 0000:00:00.0: Signaling PME with IRQ 83 [ 2.073972] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input0 [ 2.081619] ACPI: Power Button [PWRB] [ 2.085922] GHES: Failed to map GSI to IRQ for generic hardware error source: 2 [ 2.093593] GHES: probe of GHES.2 failed with error 82 [ 2.098936] GHES: Failed to map GSI to IRQ for generic hardware error source: 3 [ 2.106588] GHES: probe of GHES.3 failed with error 82 [ 2.111936] GHES: Failed to map GSI to IRQ for generic hardware error source: 4 [ 2.119608] GHES: probe of GHES.4 failed with error 82 [ 2.125011] GHES: Failed to map GSI to IRQ for generic hardware error source: 5 [ 2.132659] GHES: probe of GHES.5 failed with error 82 [ 2.138017] GHES: Failed to map GSI to IRQ for generic hardware error source: 6 [ 2.145633] GHES: probe of GHES.6 failed with error 82 [ 2.151042] GHES: Failed to map GSI to IRQ for generic hardware error source: 7 [ 2.158724] GHES: probe of GHES.7 failed with error 82 [ 2.164126] GHES: Failed to map GSI to IRQ for generic hardware error source: 8 [ 2.171797] GHES: probe of GHES.8 failed with error 82 [ 2.177160] GHES: Failed to map GSI to IRQ for generic hardware error source: 9 [ 2.184845] GHES: probe of GHES.9 failed with error 82 [ 2.190233] GHES: Failed to enable APEI firmware first mode. [ 2.196297] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.203376] console [ttyS0] disabled [ 2.227246] APMC0D08:00: ttyS0 at MMIO 0x1c020000 (irq = 22, base_baud = 3125000) is a U6_16550A [ 2.236527] console [ttyS0] enabled [ 2.243657] bootconsole [uart8250] disabled [ 2.272506] APMC0D08:01: ttyS1 at MMIO 0x1c021000 (irq = 23, base_baud = 3125000) is a U6_16550A [ 2.281671] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.287755] rdac: device handler registered [ 2.291963] hp_sw: device handler registered [ 2.296209] emc: device handler registered [ 2.300380] alua: device handler registered [ 2.304688] libphy: Fixed MDIO Bus: probed [ 2.308849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.315346] ehci-pci: EHCI PCI platform driver [ 2.319790] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.325941] ohci-pci: OHCI PCI platform driver [ 2.330377] uhci_hcd: USB Universal Host Controller Interface driver [ 2.336788] xhci-hcd 808622B7:00: xHCI Host Controller [ 2.341980] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 1 [ 2.349425] xhci-hcd 808622B7:00: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010 [ 2.357756] xhci-hcd 808622B7:00: irq 29, io mem 0x19000000 [ 2.363370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.370130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.377318] usb usb1: Product: xHCI Host Controller [ 2.382169] usb usb1: Manufacturer: Linux 4.11.0-rc8.xgene_msix1+ xhci-hcd [ 2.389010] usb usb1: SerialNumber: 808622B7:00 [ 2.393727] hub 1-0:1.0: USB hub found [ 2.397479] hub 1-0:1.0: 1 port detected [ 2.401480] xhci-hcd 808622B7:00: xHCI Host Controller [ 2.406677] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 2 [ 2.413986] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.422078] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.428836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.436020] usb usb2: Product: xHCI Host Controller [ 2.440875] usb usb2: Manufacturer: Linux 4.11.0-rc8.xgene_msix1+ xhci-hcd [ 2.447720] usb usb2: SerialNumber: 808622B7:00 [ 2.452398] hub 2-0:1.0: USB hub found [ 2.456137] hub 2-0:1.0: 1 port detected [ 2.460168] xhci-hcd 808622B7:01: xHCI Host Controller [ 2.465356] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 3 [ 2.472759] xhci-hcd 808622B7:01: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010 [ 2.481087] xhci-hcd 808622B7:01: irq 30, io mem 0x19800000 [ 2.486684] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.493443] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.500630] usb usb3: Product: xHCI Host Controller [ 2.505482] usb usb3: Manufacturer: Linux 4.11.0-rc8.xgene_msix1+ xhci-hcd [ 2.512327] usb usb3: SerialNumber: 808622B7:01 [ 2.517049] hub 3-0:1.0: USB hub found [ 2.520789] hub 3-0:1.0: 1 port detected [ 2.524790] xhci-hcd 808622B7:01: xHCI Host Controller [ 2.529976] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 4 [ 2.537284] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.545370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.552128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.559317] usb usb4: Product: xHCI Host Controller [ 2.564168] usb usb4: Manufacturer: Linux 4.11.0-rc8.xgene_msix1+ xhci-hcd [ 2.571013] usb usb4: SerialNumber: 808622B7:01 [ 2.575716] hub 4-0:1.0: USB hub found [ 2.579464] hub 4-0:1.0: 1 port detected [ 2.583505] usbcore: registered new interface driver usbserial [ 2.589324] usbcore: registered new interface driver usbserial_generic [ 2.595826] usbserial: USB Serial support registered for generic [ 2.601884] mousedev: PS/2 mouse device common for all mice [ 2.607620] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 2.613906] EFI Variables Facility v0.08 2004-May-17 [ 2.619081] hidraw: raw HID events driver (C) Jiri Kosina [ 2.624514] usbcore: registered new interface driver usbhid [ 2.630067] usbhid: USB HID core driver [ 2.633953] drop_monitor: Initializing network drop monitor service [ 2.640280] Initializing XFRM netlink socket [ 2.644691] NET: Registered protocol family 10 [ 2.649496] Segment Routing with IPv6 [ 2.653160] NET: Registered protocol family 17 [ 2.657841] registered taskstats version 1 [ 2.661921] Loading compiled-in X.509 certificates [ 2.669794] alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1)) [ 2.678237] Loaded X.509 cert 'Build time autogenerated kernel key: 98aa1b1964f4052ba920878b6f8348e178459895' [ 2.688204] zswap: loaded using pool lzo/zbud [ 2.713270] Key type big_key registered [ 2.717168] BERT: [Firmware Bug]: table invalid. [ 2.721839] rtc-efi rtc-efi: setting system clock to 2017-04-28 16:00:41 UTC (1493395241) [ 2.757884] Freeing unused kernel memory: 1216K [ 2.767418] random: systemd: uninitialized urandom read (16 bytes read) [ 2.774589] random: systemd: uninitialized urandom read (16 bytes read) [ 2.781211] random: systemd: uninitialized urandom read (16 bytes read) [ 2.789666] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.807890] systemd[1]: Detected architecture arm64. [ 2.812833] systemd[1]: Running in initial RAM disk. [ 2.847031] systemd[1]: Set hostname to <localhost.localdomain>. [ 2.979499] random: systemd: uninitialized urandom read (16 bytes read) [ 2.986233] random: systemd: uninitialized urandom read (16 bytes read) [ 2.993080] random: systemd: uninitialized urandom read (16 bytes read) [ 3.000078] random: systemd: uninitialized urandom read (16 bytes read) [ 3.010094] random: systemd: uninitialized urandom read (16 bytes read) [ 3.017557] random: systemd: uninitialized urandom read (16 bytes read) [ 3.025329] random: systemd: uninitialized urandom read (16 bytes read) [ 3.087174] systemd[1]: Reached target Swap. [ 3.091495] systemd[1]: Starting Swap. [ 3.117069] systemd[1]: Reached target Timers. [ 3.121551] systemd[1]: Starting Timers. [ 3.157062] systemd[1]: Reached target Local File Systems. [ 3.162579] systemd[1]: Starting Local File Systems. [ 4.087490] device-mapper: uevent: version 1.0.3 [ 4.092424] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 4.400761] libphy: APM X-Gene MDIO bus: probed [ 4.444412] pps_core: LinuxPPS API ver. 1 registered [ 4.449417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 4.450547] xgene-ahci APMC0D0D:00: skip clock and PHY initialization [ 4.450561] xgene-ahci APMC0D0D:00: controller can't do NCQ, turning off CAP_NCQ [ 4.450629] xgene-ahci APMC0D0D:00: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 4.450643] xgene-ahci APMC0D0D:00: flags: 64bit sntf pm only pmp fbs pio slum part ccc [ 4.450670] xgene-ahci APMC0D0D:00: port 0 is not capable of FBS [ 4.491029] sdhci: Secure Digital Host Controller Interface driver [ 4.491033] sdhci: Copyright(c) Pierre Ossman [ 4.512024] PTP clock support registered [ 4.512754] xgene-ahci APMC0D0D:00: port 1 is not capable of FBS [ 4.525820] scsi host0: xgene-ahci [ 4.529855] scsi host1: xgene-ahci [ 4.533507] ata1: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 27 [ 4.534007] mmc0: SDHCI controller on ACPI [APMC0D0C:00] using PIO [ 4.547673] ata2: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 27 [ 4.548138] xgene-enet APMC0D05:00: clocks have been setup already [ 4.553893] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.553894] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.554194] e1000e 0000:01:00.0: enabling device (0000 -> 0002) [ 4.554351] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.554379] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): Failed to initialize MSI-X interrupts. Falling back to MSI interrupts. [ 4.554394] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): Failed to initialize MSI interrupts. Falling back to legacy interrupts. [ 4.617549] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 4.647217] xgene-enet APMC0D30:00: clocks have been setup already [ 4.665238] xgene-ahci APMC0D0D:01: skip clock and PHY initialization [ 4.671721] xgene-ahci APMC0D0D:01: controller can't do NCQ, turning off CAP_NCQ [ 4.679178] xgene-ahci APMC0D0D:01: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 4.688066] xgene-ahci APMC0D0D:01: flags: 64bit sntf pm only pmp fbs pio slum part ccc [ 4.693143] e1000e 0000:01:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 68:05:ca:46:ce:08 [ 4.693146] e1000e 0000:01:00.0 eth2: Intel(R) PRO/1000 Network Connection [ 4.693162] e1000e 0000:01:00.0 eth2: MAC: 3, PHY: 8, PBA No: E46981-008 [ 4.696649] e1000e 0000:01:00.0 enp1s0: renamed from eth2 [ 4.722971] xgene-ahci APMC0D0D:01: port 0 is not capable of FBS [ 4.729089] xgene-ahci APMC0D0D:01: port 1 is not capable of FBS [ 4.736197] scsi host2: xgene-ahci [ 4.740144] scsi host3: xgene-ahci [ 4.743793] ata3: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x100 irq 28 [ 4.751735] ata4: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x180 irq 28 [ 4.857119] xgene-enet APMC0D30:01: clocks have been setup already [ 4.874076] xgene-enet APMC0D31:00: clocks have been setup already [ 5.088466] ata3: SATA link down (SStatus 0 SControl 4300) [ 5.099014] ata4: SATA link down (SStatus 0 SControl 4300) [ 5.217012] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 4300) [ 5.223552] ata1.00: ATA-8: Corsair Neutron GTX SSD, M311, max UDMA/133 [ 5.230179] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 5.236797] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 4300) [ 5.243335] ata2.00: ATA-8: Corsair Neutron GTX SSD, M311, max UDMA/133 [ 5.249961] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 5.256600] ata1.00: configured for UDMA/133 [ 5.261153] ata2.00: configured for UDMA/133 [ 5.261162] scsi 0:0:0:0: Direct-Access ATA Corsair Neutron M311 PQ: 0 ANSI: 5 [ 5.357513] scsi 1:0:0:0: Direct-Access ATA Corsair Neutron M311 PQ: 0 ANSI: 5 [ 5.357514] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.357539] sd 0:0:0:0: [sda] Write Protect is off [ 5.357542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.357575] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.360081] sda: sda1 sda2 sda3 [ 5.360645] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.487441] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.494939] sd 1:0:0:0: [sdb] Write Protect is off [ 5.499723] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.499757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.511144] sdb: sdb1 [ 5.513907] sd 1:0:0:0: [sdb] Attached SCSI disk [ 5.962036] random: fast init done [ 6.345919] SGI XFS with ACLs, security attributes, no debug enabled [ 6.356572] XFS (dm-0): Mounting V5 Filesystem [ 6.398617] XFS (dm-0): Ending clean mount [ 6.973554] systemd-journald[198]: Received SIGTERM from PID 1 (systemd). [ 6.989018] systemd: 20 output lines suppressed due to ratelimiting [ 7.019839] audit: type=1404 audit(1493395245.790:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 7.106438] SELinux: 32768 avtab hash slots, 105786 rules. [ 7.137061] SELinux: 32768 avtab hash slots, 105786 rules. [ 7.216426] SELinux: 8 users, 14 roles, 4990 types, 304 bools, 1 sens, 1024 cats [ 7.216433] SELinux: 94 classes, 105786 rules [ 7.223909] SELinux: Class sctp_socket not defined in policy. [ 7.229741] SELinux: Class icmp_socket not defined in policy. [ 7.235543] SELinux: Class ax25_socket not defined in policy. [ 7.241349] SELinux: Class ipx_socket not defined in policy. [ 7.247069] SELinux: Class netrom_socket not defined in policy. [ 7.253043] SELinux: Class atmpvc_socket not defined in policy. [ 7.259021] SELinux: Class x25_socket not defined in policy. [ 7.264736] SELinux: Class rose_socket not defined in policy. [ 7.270540] SELinux: Class decnet_socket not defined in policy. [ 7.276513] SELinux: Class atmsvc_socket not defined in policy. [ 7.282490] SELinux: Class rds_socket not defined in policy. [ 7.288207] SELinux: Class irda_socket not defined in policy. [ 7.294008] SELinux: Class pppox_socket not defined in policy. [ 7.299898] SELinux: Class llc_socket not defined in policy. [ 7.305613] SELinux: Class can_socket not defined in policy. [ 7.311330] SELinux: Class tipc_socket not defined in policy. [ 7.317135] SELinux: Class bluetooth_socket not defined in policy. [ 7.323368] SELinux: Class iucv_socket not defined in policy. [ 7.329172] SELinux: Class rxrpc_socket not defined in policy. [ 7.335059] SELinux: Class isdn_socket not defined in policy. [ 7.340863] SELinux: Class phonet_socket not defined in policy. [ 7.346836] SELinux: Class ieee802154_socket not defined in policy. [ 7.353159] SELinux: Class caif_socket not defined in policy. [ 7.358965] SELinux: Class alg_socket not defined in policy. [ 7.364679] SELinux: Class nfc_socket not defined in policy. [ 7.370397] SELinux: Class vsock_socket not defined in policy. [ 7.376284] SELinux: Class kcm_socket not defined in policy. [ 7.382002] SELinux: Class qipcrtr_socket not defined in policy. [ 7.388066] SELinux: Class smc_socket not defined in policy. [ 7.393780] SELinux: the above unknown classes and permissions will be allowed [ 7.400979] SELinux: Completing initialization. [ 7.400980] SELinux: Setting up existing superblocks. [ 7.450804] audit: type=1403 audit(1493395246.220:3): policy loaded auid=4294967295 ses=4294967295 [ 7.455100] systemd[1]: Successfully loaded SELinux policy in 435.279ms. [ 7.470770] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 7.497588] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.502902] systemd[1]: Inserted module 'ip_tables' [ 7.552579] systemd[1]: Relabelled /dev and /run in 42.787ms. [ 8.005378] systemd-journald[616]: Received request to flush runtime journal from PID 1 [ 8.167863] xgene-slimpro-mbox APMC0D01:00: APM X-Gene SLIMpro MailBox registered [ 8.172785] RPC: Registered named UNIX socket transport module. [ 8.172790] RPC: Registered udp transport module. [ 8.172794] RPC: Registered tcp transport module. [ 8.172797] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.197228] xgene-rng APMC0D18:00: Couldn't get the clock for RNG [ 8.204225] xgene-gpio-sb APMC0D15:00: Support 22 gpios, 6 irqs start from pin 8 [ 8.213102] xgene-gpio-sb APMC0D15:00: X-Gene GPIO Standby driver registered [ 8.223510] xgene-slimpro-i2c APMC0D40:00: i2c mailbox channel request failed [ 8.289837] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.295454] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 8.387796] xgene-slimpro-hwmon APMC0D29:00: APM X-Gene SoC HW monitor driver registered [ 8.518644] Adding 8388544k swap on /dev/mapper/rhelp_dhcp--171-swap. Priority:-1 extents:1 across:8388544k SSFS [ 8.531009] XFS (sda2): Mounting V5 Filesystem [ 8.551661] XFS (sda2): Ending clean mount [ 8.640881] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 8.702746] XFS (dm-2): Mounting V5 Filesystem [ 8.721803] XFS (dm-2): Ending clean mount [ 9.540607] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 9.637501] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 9.650581] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.656789] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.669293] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.675510] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.687727] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 9.693923] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 9.706099] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 9.712318] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 9.730562] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 9.737469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.744174] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 9.751066] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 9.757808] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.687474] xgene-enet APMC0D30:00 eth1: Link is Down [ 10.692580] xgene-enet APMC0D05:00 eth0: Link is Down [ 10.767324] xgene-enet APMC0D30:01 eth2: Link is Down [ 12.418373] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.426374] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 13.808268] xgene-enet APMC0D05:00 eth0: Link is Up - 1Gbps/Full - flow control off [ 13.815925] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 108.537236] random: crng init done
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-rc8.xgene_msix2+ (root@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-14) (GCC) ) #2 SMP Fri Apr 28 12:06:14 EDT 2017 [ 0.000000] Boot CPU: AArch64 Processor [500f0001] [ 0.000000] earlycon: uart8250 at MMIO32 0x000000001c020000 (options '') [ 0.000000] bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.40 by X-Gene Mustang Board EFI Aug 19 2016 18:02:24 [ 0.000000] efi: ACPI=0x43fa82d000 ACPI 2.0=0x43fa82d014 SMBIOS 3.0=0x43fa82b000 ESRT=0x43ff053d18 [ 0.000000] esrt: Reserving ESRT space from 0x00000043ff053d18 to 0x00000043ff053d78. [ 0.000000] cma: Reserved 512 MiB at 0x00000040e0000000 [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000043FA82D014 000024 (v02 APM ) [ 0.000000] ACPI: XSDT 0x00000043FA82C0E8 000084 (v01 APM XGENE 00000003 01000013) [ 0.000000] ACPI: FACP 0x00000043FA822000 00010C (v05 APM XGENE 00000003 INTL 20140724) [ 0.000000] ACPI: DSDT 0x00000043FA823000 005837 (v05 APM APM88xxx 00000001 INTL 20140724) [ 0.000000] ACPI: DBG2 0x00000043FA829000 0000AA (v00 APMC0D XGENEDBG 00000000 INTL 20140724) [ 0.000000] ACPI: GTDT 0x00000043FA820000 000060 (v02 APM XGENE 00000001 INTL 20140724) [ 0.000000] ACPI: MCFG 0x00000043FA81F000 00003C (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: SPCR 0x00000043FA81E000 000050 (v02 APMC0D XGENESPC 00000000 INTL 20140724) [ 0.000000] ACPI: SSDT 0x00000043FA81D000 00002D (v02 APM XGENE 00000001 INTL 20140724) [ 0.000000] ACPI: BERT 0x00000043FA81C000 000030 (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: HEST 0x00000043FA81B000 0002A8 (v01 APM XGENE 00000002 INTL 20140724) [ 0.000000] ACPI: APIC 0x00000043FA81A000 0002A4 (v03 APM XGENE 00000003 01000013) [ 0.000000] ACPI: SSDT 0x00000043FA819000 000063 (v02 REDHAT MACADDRS 00000001 01000013) [ 0.000000] ACPI: SSDT 0x00000043FA818000 000032 (v02 REDHAT UARTCLKS 00000001 01000013) [ 0.000000] ACPI: PCCT 0x00000043FA817000 000300 (v01 APM XGENE 00000003 01000013) [ 0.000000] ACPI: SPCR: console: uart,mmio,0x1c020000,115200 [ 0.000000] ACPI: NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000043ffffffff] [ 0.000000] NUMA: Adding memblock [0x4000000000 - 0x40001fffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x4000200000 - 0x43fa7cffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43fa7d0000 - 0x43faa1ffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43faa20000 - 0x43ff9cffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43ff9d0000 - 0x43ffa1ffff] on node 0 [ 0.000000] NUMA: Adding memblock [0x43ffa20000 - 0x43ffffffff] on node 0 [ 0.000000] NUMA: Initmem setup node 0 [mem 0x4000000000-0x43ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x43ffffe200-0x43ffffffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000004000000000-0x00000040ffffffff] [ 0.000000] Normal [mem 0x0000004100000000-0x00000043ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000004000000000-0x00000040001fffff] [ 0.000000] node 0: [mem 0x0000004000200000-0x00000043fa7cffff] [ 0.000000] node 0: [mem 0x00000043fa7d0000-0x00000043faa1ffff] [ 0.000000] node 0: [mem 0x00000043faa20000-0x00000043ff9cffff] [ 0.000000] node 0: [mem 0x00000043ff9d0000-0x00000043ffa1ffff] [ 0.000000] node 0: [mem 0x00000043ffa20000-0x00000043ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000004000000000-0x00000043ffffffff] [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65536 pages, LIFO batch:1 [ 0.000000] Normal zone: 192 pages used for memmap [ 0.000000] Normal zone: 196608 pages, LIFO batch:1 [ 0.000000] psci: is not implemented in ACPI. [ 0.000000] percpu: Embedded 3 pages/cpu @ffff8003ffdf0000 s124312 r8192 d64104 u196608 [ 0.000000] pcpu-alloc: s124312 r8192 d64104 u196608 alloc=3*65536 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 261888 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc8.xgene_msix2+ root=/dev/mapper/rhelp_dhcp--171-root ro crashkernel=auto rd.lvm.lv=rhelp_dhcp-171/root rd.lvm.lv=rhelp_dhcp-171/swap LANG=en_US.UTF-8 acpi=force earlycon=uart8250,mmio32,0x1c020000 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes) [ 0.000000] software IO TLB [mem 0x40dbff0000-0x40dfff0000] (64MB) mapped at [ffff8000dbff0000-ffff8000dffeffff] [ 0.000000] Memory: 16109888K/16777216K available (7420K kernel code, 1354K rwdata, 3200K rodata, 1216K init, 7286K bss, 143040K reserved, 524288K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB) [ 0.000000] .text : 0xffff000008080000 - 0xffff0000087c0000 ( 7424 KB) [ 0.000000] .rodata : 0xffff0000087c0000 - 0xffff000008af0000 ( 3264 KB) [ 0.000000] .init : 0xffff000008af0000 - 0xffff000008c20000 ( 1216 KB) [ 0.000000] .data : 0xffff000008c20000 - 0xffff000008d72a00 ( 1355 KB) [ 0.000000] .bss : 0xffff000008d72a00 - 0xffff0000094902d4 ( 7287 KB) [ 0.000000] fixed : 0xffff7fdffe7d0000 - 0xffff7fdffec00000 ( 4288 KB) [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum) [ 0.000000] 0xffff7fe000000000 - 0xffff7fe001000000 ( 16 MB actual) [ 0.000000] memory : 0xffff800000000000 - 0xffff800400000000 ( 16384 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: No distributor detected at @ffff000008050000, giving up [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.008379] Console: colour dummy device 80x25 [ 0.012950] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000) [ 0.023693] pid_max: default: 32768 minimum: 301 [ 0.028471] ACPI: Core revision 20170119 [ 0.036063] ACPI Error: Method parse/execution failed [\_SB.ET00._STA] (Node ffff8003c0195c08), AE_CTRL_PARSE_CONTINUE (20170119/psparse-543) [ 0.049121] ACPI Error: Invalid zero thread count in method (20170119/dsmethod-790) [ 0.056989] ACPI Error: Invalid OwnerId: 0x00 (20170119/utownerid-186) [ 0.063808] ACPI Error: Method parse/execution failed [\_SB.ET01._STA] (Node ffff8003c0195eb0), AE_CTRL_PARSE_CONTINUE (20170119/psparse-543) [ 0.076952] ACPI Error: Invalid zero thread count in method (20170119/dsmethod-790) [ 0.084871] ACPI Error: Invalid OwnerId: 0x00 (20170119/utownerid-186) [ 0.092015] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.098567] Security Framework initialized [ 0.102838] SELinux: Initializing. [ 0.106408] SELinux: Starting in permissive mode [ 0.106607] Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes) [ 0.116844] Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes) [ 0.125552] Mount-cache hash table entries: 32768 (order: 2, 262144 bytes) [ 0.132626] Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes) [ 0.140570] ftrace: allocating 26815 entries in 7 pages [ 0.203748] ASID allocator initialised with 65536 entries [ 0.209911] Remapping and enabling EFI services. [ 0.214705] EFI remap 0x0000000010510000 => 0000000020000000 [ 0.220700] EFI remap 0x0000000010548000 => 0000000020018000 [ 0.226689] EFI remap 0x0000000017000000 => 0000000020020000 [ 0.232657] EFI remap 0x000000001c025000 => 0000000020035000 [ 0.238736] UEFI Runtime regions are not aligned to 64 KB -- buggy firmware? [ 0.238741] ------------[ cut here ]------------ [ 0.250727] WARNING: CPU: 0 PID: 1 at arch/arm64/kernel/efi.c:34 efi_create_mapping+0x4c/0x104 [ 0.259532] Modules linked in: [ 0.264214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc8.xgene_msix2+ #2 [ 0.271827] Hardware name: APM X-Gene Mustang board (DT) [ 0.277238] task: ffff8003c1bc0000 task.stack: ffff8003c1c00000 [ 0.283324] PC is at efi_create_mapping+0x4c/0x104 [ 0.288269] LR is at efi_create_mapping+0x4c/0x104 [ 0.293127] pc : [<ffff000008af51f0>] lr : [<ffff000008af51f0>] pstate: 60000045 [ 0.300784] sp : ffff8003c1c03d20 [ 0.304207] x29: ffff8003c1c03d20 x28: 0000000000000000 [ 0.309655] x27: ffff000008c53000 x26: ffff000008d429c8 [ 0.315110] x25: ffff000008d42000 x24: 0000000000000000 [ 0.320556] x23: ffff000008a4c910 x22: ffff000008c60000 [ 0.325994] x21: ffff000008c53000 x20: ffff000008d429c8 [ 0.331484] x19: ffff8003f96ab348 x18: 00000000b6a2110e [ 0.337008] x17: 0000000000000000 x16: 0000000000000000 [ 0.342437] x15: ffff000008c53000 x14: 00000000cb9aed1d [ 0.347944] x13: ffff0000089ca500 x12: 0000000000040b00 [ 0.353425] x11: ffff8003c1c039e0 x10: ffff8003c1c039e0 [ 0.358889] x9 : 0000000000000073 x8 : 6620796767756220 [ 0.364352] x7 : 2d2d20424b203436 x6 : ffff000009274718 [ 0.369825] x5 : ffff8003ffdf7530 x4 : 0000000000000000 [ 0.375280] x3 : 0000000000000000 x2 : 0000000000040b00 [ 0.380769] x1 : 0000000000040b00 x0 : 0000000000000040 [ 0.387782] ---[ end trace 9580655578fda7c1 ]--- [ 0.392519] Call trace: [ 0.395045] Exception stack(0xffff8003c1c03b30 to 0xffff8003c1c03c60) [ 0.401735] 3b20: ffff8003f96ab348 0001000000000000 [ 0.409730] 3b40: ffff8003c1c03d20 ffff000008af51f0 0000000060000045 ffff000008d429c8 [ 0.417828] 3b60: 0000000000000000 0000000000000000 ffff8003c1c03d20 ffff8003c1c03d20 [ 0.425857] 3b80: ffff8003c1c03ce0 00000000ffffffc8 ffff8003c1c03be0 ffff00000812f6b8 [ 0.433946] 3ba0: ffff000008c53000 00000000ffffffc8 ffff8003c1c03c00 ffff0000089be038 [ 0.442053] 3bc0: ffff8003c1c03d20 ffff8003c1c03d20 ffff8003c1c03ce0 00000000ffffffc8 [ 0.450126] 3be0: ffff8003c1c03c70 0000000000040b00 0000000000000040 0000000000040b00 [ 0.458207] 3c00: 0000000000040b00 0000000000000000 0000000000000000 ffff8003ffdf7530 [ 0.466227] 3c20: ffff000009274718 2d2d20424b203436 6620796767756220 0000000000000073 [ 0.474282] 3c40: ffff8003c1c039e0 ffff8003c1c039e0 0000000000040b00 ffff0000089ca500 [ 0.482321] [<ffff000008af51f0>] efi_create_mapping+0x4c/0x104 [ 0.488270] [<ffff000008b3db98>] arm_enable_runtime_services+0x154/0x238 [ 0.495238] [<ffff000008083698>] do_one_initcall+0x54/0x15c [ 0.501030] [<ffff000008af0d18>] kernel_init_freeable+0xe4/0x25c [ 0.507221] [<ffff0000087ae488>] kernel_init+0x18/0x108 [ 0.512606] [<ffff0000080833c0>] ret_from_fork+0x10/0x50 [ 0.518077] EFI remap 0x00000043fa7df000 => 000000002004f000 [ 0.524089] EFI remap 0x00000043fa82e000 => 000000002006e000 [ 0.530085] EFI remap 0x00000043ff9d6000 => 0000000020266000 [ 0.536148] EFI remap 0x00000043ff9ea000 => 000000002027a000 [ 0.542320] smp: Bringing up secondary CPUs ... [ 0.547164] Detected PIPT I-cache on CPU1 [ 0.547192] CPU1: Booted secondary processor [500f0001] [ 0.547411] Detected PIPT I-cache on CPU2 [ 0.547433] CPU2: Booted secondary processor [500f0001] [ 0.547646] Detected PIPT I-cache on CPU3 [ 0.547660] CPU3: Booted secondary processor [500f0001] [ 0.547854] Detected PIPT I-cache on CPU4 [ 0.547875] CPU4: Booted secondary processor [500f0001] [ 0.548076] Detected PIPT I-cache on CPU5 [ 0.548090] CPU5: Booted secondary processor [500f0001] [ 0.548281] Detected PIPT I-cache on CPU6 [ 0.548302] CPU6: Booted secondary processor [500f0001] [ 0.548505] Detected PIPT I-cache on CPU7 [ 0.548519] CPU7: Booted secondary processor [500f0001] [ 0.548562] smp: Brought up 1 node, 8 CPUs [ 0.620493] SMP: Total of 8 processors activated. [ 0.625425] CPU features: detected feature: 32-bit EL0 Support [ 0.631511] CPU: All CPU(s) started at EL2 [ 0.636531] devtmpfs: initialized [ 0.640271] SMBIOS 3.0.0 present. [ 0.643745] DMI: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.15 Aug 19 2016 [ 0.653110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.663392] futex hash table entries: 2048 (order: 2, 262144 bytes) [ 0.670383] pinctrl core: initialized pinctrl subsystem [ 0.676091] NET: Registered protocol family 16 [ 0.681082] cpuidle: using governor menu [ 0.685276] Detected 8 PCC Subspaces [ 0.689040] Registering PCC driver as Mailbox controller [ 0.694649] vdso: 2 pages (1 code @ ffff0000087e0000, 1 data @ ffff000008c40000) [ 0.702382] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers. [ 0.711945] DMA: preallocated 256 KiB pool for atomic allocations [ 0.718368] ACPI: bus type PCI registered [ 0.722572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.729340] Serial: AMBA PL011 UART driver [ 0.735597] HugeTLB registered 512 MB page size, pre-allocated 0 pages [ 0.743073] ACPI: Added _OSI(Module Device) [ 0.747432] ACPI: Added _OSI(Processor Device) [ 0.752083] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.757005] ACPI: Added _OSI(Processor Aggregator Device) [ 0.772090] ACPI: Interpreter enabled [ 0.775913] ACPI: Using GIC for interrupt routing [ 0.780864] ACPI: MCFG table detected, 1 entries [ 0.785858] HEST: Table parsing has been initialized. [ 0.793565] ACPI: Power Resource [SCVR] (on) [ 0.828517] xgene-msi APMC0D0E:00: APM X-Gene PCIe MSI driver loaded [ 0.835285] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.841791] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.850585] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.859017] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xe0d0000000-0xe0dfffffff] for [bus 00-ff] with xgene_v1_pcie_ecam_ops [ 0.871645] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 0xe0d0000000-0xe0dfffffff] not reserved in ACPI namespace [ 0.882851] acpi PNP0A08:00: ECAM at [mem 0xe0d0000000-0xe0dfffffff] for [bus 00-ff] [ 0.891009] Remapped I/O 0x000000e010000000 to [io 0x0000-0xffff window] [ 0.898264] PCI host bridge to bus 0000:00 [ 0.902574] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window] (bus address [0x10000000-0x1000ffff]) [ 0.913134] pci_bus 0000:00: root bus resource [mem 0xe040000000-0xe07fffffff window] (bus address [0x40000000-0x7fffffff]) [ 0.924779] pci_bus 0000:00: root bus resource [mem 0xf000000000-0xffffffffff window] [ 0.932964] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.938697] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400 [ 0.938776] pci 0000:00:00.0: supports D1 D2 [ 0.938937] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 [ 0.938970] pci 0000:01:00.0: reg 0x10: [mem 0xe040080000-0xe04009ffff] [ 0.938986] pci 0000:01:00.0: reg 0x14: [mem 0xe040000000-0xe04007ffff] [ 0.939003] pci 0000:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 0.939019] pci 0000:01:00.0: reg 0x1c: [mem 0xe0400a0000-0xe0400a3fff] [ 0.939065] pci 0000:01:00.0: reg 0x30: [mem 0xfffc0000-0xffffffff pref] [ 0.939205] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.968751] pci 0000:00:00.0: BAR 14: assigned [mem 0xe040000000-0xe0400fffff] [ 0.976281] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.982748] pci 0000:01:00.0: BAR 1: assigned [mem 0xe040000000-0xe04007ffff] [ 0.990222] pci 0000:01:00.0: BAR 6: assigned [mem 0xe040080000-0xe0400bffff pref] [ 0.998135] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0400c0000-0xe0400dffff] [ 1.005583] pci 0000:01:00.0: BAR 3: assigned [mem 0xe0400e0000-0xe0400e3fff] [ 1.013044] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f] [ 1.019447] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.024681] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.031099] pci 0000:00:00.0: bridge window [mem 0xe040000000-0xe0400fffff] [ 1.039197] vgaarb: loaded [ 1.042181] SCSI subsystem initialized [ 1.046203] libata version 3.00 loaded. [ 1.046240] ACPI: bus type USB registered [ 1.050444] usbcore: registered new interface driver usbfs [ 1.056204] usbcore: registered new interface driver hub [ 1.061821] usbcore: registered new device driver usb [ 1.067216] Registered efivars operations [ 1.071684] NetLabel: Initializing [ 1.075256] NetLabel: domain hash size = 128 [ 1.079777] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.085747] NetLabel: unlabeled traffic allowed by default [ 1.091744] clocksource: Switched to clocksource arch_sys_counter [ 1.116637] VFS: Disk quotas dquot_6.6.0 [ 1.120816] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 1.128374] pnp: PnP ACPI init [ 1.132213] pnp: PnP ACPI: found 0 devices [ 1.139026] NET: Registered protocol family 2 [ 1.143824] TCP established hash table entries: 131072 (order: 4, 1048576 bytes) [ 1.151892] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) [ 1.159275] TCP: Hash tables configured (established 131072 bind 65536) [ 1.166293] UDP hash table entries: 8192 (order: 2, 262144 bytes) [ 1.172798] UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes) [ 1.179867] NET: Registered protocol family 1 [ 1.184479] PCI: CLS 64 bytes, default 128 [ 1.184578] Unpacking initramfs... [ 1.868130] Freeing initrd memory: 32640K [ 1.872713] kvm [1]: 8-bit VMID [ 1.875992] kvm [1]: IDMAP page: 40009b7000 [ 1.880358] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 1.886375] kvm [1]: Hyp mode initialized successfully [ 1.891755] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance) [ 1.900915] kvm [1]: vgic-v2@780cf000 [ 1.904807] kvm [1]: vgic interrupt IRQ1 [ 1.908909] kvm [1]: virtual timer IRQ4 [ 1.928681] audit: initializing netlink subsys (disabled) [ 1.934412] audit: type=2000 audit(1.470:1): state=initialized audit_enabled=0 res=1 [ 1.934540] Initialise system trusted keyrings [ 1.934609] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 1.936691] zbud: loaded [ 1.937062] SELinux: Registering netfilter hooks [ 2.016448] NET: Registered protocol family 38 [ 2.021088] Key type asymmetric registered [ 2.025420] Asymmetric key parser 'x509' registered [ 2.030583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.038391] io scheduler noop registered [ 2.042467] io scheduler deadline registered (default) [ 2.047931] io scheduler cfq registered [ 2.051950] io scheduler mq-deadline registered [ 2.056870] atomic64_test: passed [ 2.060612] xgene-gpio APMC0D14:00: X-Gene GPIO driver registered. [ 2.067387] pcieport 0000:00:00.0: AER enabled with IRQ 83 [ 2.073172] pcieport 0000:00:00.0: Signaling PME with IRQ 83 [ 2.079355] input: Power Button as /devices/LNXSYSTM:00/PNP0C0C:00/input/input0 [ 2.087026] ACPI: Power Button [PWRB] [ 2.091368] GHES: Failed to map GSI to IRQ for generic hardware error source: 2 [ 2.099018] GHES: probe of GHES.2 failed with error 82 [ 2.104386] GHES: Failed to map GSI to IRQ for generic hardware error source: 3 [ 2.112068] GHES: probe of GHES.3 failed with error 82 [ 2.117497] GHES: Failed to map GSI to IRQ for generic hardware error source: 4 [ 2.125101] GHES: probe of GHES.4 failed with error 82 [ 2.130452] GHES: Failed to map GSI to IRQ for generic hardware error source: 5 [ 2.138036] GHES: probe of GHES.5 failed with error 82 [ 2.143461] GHES: Failed to map GSI to IRQ for generic hardware error source: 6 [ 2.151121] GHES: probe of GHES.6 failed with error 82 [ 2.156510] GHES: Failed to map GSI to IRQ for generic hardware error source: 7 [ 2.164189] GHES: probe of GHES.7 failed with error 82 [ 2.169574] GHES: Failed to map GSI to IRQ for generic hardware error source: 8 [ 2.177249] GHES: probe of GHES.8 failed with error 82 [ 2.182604] GHES: Failed to map GSI to IRQ for generic hardware error source: 9 [ 2.190284] GHES: probe of GHES.9 failed with error 82 [ 2.195693] GHES: Failed to enable APEI firmware first mode. [ 2.201771] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.208814] console [ttyS0] disabled [ 2.232712] APMC0D08:00: ttyS0 at MMIO 0x1c020000 (irq = 22, base_baud = 3125000) is a U6_16550A [ 2.241919] console [ttyS0] enabled [ 2.249007] bootconsole [uart8250] disabled [ 2.277886] APMC0D08:01: ttyS1 at MMIO 0x1c021000 (irq = 23, base_baud = 3125000) is a U6_16550A [ 2.287044] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.293126] rdac: device handler registered [ 2.297348] hp_sw: device handler registered [ 2.301595] emc: device handler registered [ 2.305766] alua: device handler registered [ 2.310077] libphy: Fixed MDIO Bus: probed [ 2.314237] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.320734] ehci-pci: EHCI PCI platform driver [ 2.325177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.331327] ohci-pci: OHCI PCI platform driver [ 2.335764] uhci_hcd: USB Universal Host Controller Interface driver [ 2.342182] xhci-hcd 808622B7:00: xHCI Host Controller [ 2.347366] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 1 [ 2.354792] xhci-hcd 808622B7:00: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010 [ 2.363122] xhci-hcd 808622B7:00: irq 29, io mem 0x19000000 [ 2.368735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.375494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.382682] usb usb1: Product: xHCI Host Controller [ 2.387533] usb usb1: Manufacturer: Linux 4.11.0-rc8.xgene_msix2+ xhci-hcd [ 2.394375] usb usb1: SerialNumber: 808622B7:00 [ 2.399097] hub 1-0:1.0: USB hub found [ 2.402848] hub 1-0:1.0: 1 port detected [ 2.406851] xhci-hcd 808622B7:00: xHCI Host Controller [ 2.412034] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 2 [ 2.419332] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.427425] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.434184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.441368] usb usb2: Product: xHCI Host Controller [ 2.446223] usb usb2: Manufacturer: Linux 4.11.0-rc8.xgene_msix2+ xhci-hcd [ 2.453069] usb usb2: SerialNumber: 808622B7:00 [ 2.457761] hub 2-0:1.0: USB hub found [ 2.461501] hub 2-0:1.0: 1 port detected [ 2.465534] xhci-hcd 808622B7:01: xHCI Host Controller [ 2.470715] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 3 [ 2.478113] xhci-hcd 808622B7:01: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010 [ 2.486441] xhci-hcd 808622B7:01: irq 30, io mem 0x19800000 [ 2.492041] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.498793] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.505984] usb usb3: Product: xHCI Host Controller [ 2.510836] usb usb3: Manufacturer: Linux 4.11.0-rc8.xgene_msix2+ xhci-hcd [ 2.517682] usb usb3: SerialNumber: 808622B7:01 [ 2.522397] hub 3-0:1.0: USB hub found [ 2.526137] hub 3-0:1.0: 1 port detected [ 2.530122] xhci-hcd 808622B7:01: xHCI Host Controller [ 2.535305] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 4 [ 2.542607] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.550692] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.557451] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.564640] usb usb4: Product: xHCI Host Controller [ 2.569491] usb usb4: Manufacturer: Linux 4.11.0-rc8.xgene_msix2+ xhci-hcd [ 2.576334] usb usb4: SerialNumber: 808622B7:01 [ 2.581037] hub 4-0:1.0: USB hub found [ 2.584788] hub 4-0:1.0: 1 port detected [ 2.588828] usbcore: registered new interface driver usbserial [ 2.594649] usbcore: registered new interface driver usbserial_generic [ 2.601150] usbserial: USB Serial support registered for generic [ 2.607208] mousedev: PS/2 mouse device common for all mice [ 2.612948] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 2.619241] EFI Variables Facility v0.08 2004-May-17 [ 2.624405] hidraw: raw HID events driver (C) Jiri Kosina [ 2.629836] usbcore: registered new interface driver usbhid [ 2.635388] usbhid: USB HID core driver [ 2.639274] drop_monitor: Initializing network drop monitor service [ 2.645602] Initializing XFRM netlink socket [ 2.650006] NET: Registered protocol family 10 [ 2.654800] Segment Routing with IPv6 [ 2.658462] NET: Registered protocol family 17 [ 2.663153] registered taskstats version 1 [ 2.667231] Loading compiled-in X.509 certificates [ 2.675102] alg: No test for pkcs1pad(rsa,sha1) (pkcs1pad(rsa-generic,sha1)) [ 2.683548] Loaded X.509 cert 'Build time autogenerated kernel key: 98aa1b1964f4052ba920878b6f8348e178459895' [ 2.693521] zswap: loaded using pool lzo/zbud [ 2.717703] Key type big_key registered [ 2.721594] BERT: [Firmware Bug]: table invalid. [ 2.726272] rtc-efi rtc-efi: setting system clock to 2017-04-28 16:24:34 UTC (1493396674) [ 2.759039] Freeing unused kernel memory: 1216K [ 2.768550] random: systemd: uninitialized urandom read (16 bytes read) [ 2.775743] random: systemd: uninitialized urandom read (16 bytes read) [ 2.782366] random: systemd: uninitialized urandom read (16 bytes read) [ 2.790811] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.809044] systemd[1]: Detected architecture arm64. [ 2.814004] systemd[1]: Running in initial RAM disk. [ 2.851832] systemd[1]: Set hostname to <localhost.localdomain>. [ 2.970013] random: systemd: uninitialized urandom read (16 bytes read) [ 2.976652] random: systemd: uninitialized urandom read (16 bytes read) [ 2.983295] random: systemd: uninitialized urandom read (16 bytes read) [ 2.989979] random: systemd: uninitialized urandom read (16 bytes read) [ 2.997677] random: systemd: uninitialized urandom read (16 bytes read) [ 3.004524] random: systemd: uninitialized urandom read (16 bytes read) [ 3.011427] random: systemd: uninitialized urandom read (16 bytes read) [ 3.051810] systemd[1]: Reached target Timers. [ 3.056250] systemd[1]: Starting Timers. [ 3.091786] systemd[1]: Created slice Root Slice. [ 3.096483] systemd[1]: Starting Root Slice. [ 3.131780] systemd[1]: Listening on udev Kernel Socket. [ 3.137083] systemd[1]: Starting udev Kernel Socket. [ 4.102501] device-mapper: uevent: version 1.0.3 [ 4.107414] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx [ 4.412199] xgene-ahci APMC0D0D:00: skip clock and PHY initialization [ 4.418619] xgene-ahci APMC0D0D:00: controller can't do NCQ, turning off CAP_NCQ [ 4.426125] xgene-ahci APMC0D0D:00: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 4.434987] xgene-ahci APMC0D0D:00: flags: 64bit sntf pm only pmp fbs pio slum part ccc [ 4.434998] xgene-ahci APMC0D0D:00: port 0 is not capable of FBS [ 4.470653] pps_core: LinuxPPS API ver. 1 registered [ 4.475669] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 4.491986] xgene-ahci APMC0D0D:00: port 1 is not capable of FBS [ 4.507826] PTP clock support registered [ 4.521307] sdhci: Secure Digital Host Controller Interface driver [ 4.527512] sdhci: Copyright(c) Pierre Ossman [ 4.577139] mmc0: SDHCI controller on ACPI [APMC0D0C:00] using PIO [ 4.612188] scsi host0: xgene-ahci [ 4.615838] scsi host1: xgene-ahci [ 4.619314] ata1: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 27 [ 4.621598] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 4.621602] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.621841] e1000e 0000:01:00.0: enabling device (0000 -> 0002) [ 4.622056] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.654091] ata2: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 27 [ 4.662326] xgene-ahci APMC0D0D:01: skip clock and PHY initialization [ 4.668755] xgene-ahci APMC0D0D:01: controller can't do NCQ, turning off CAP_NCQ [ 4.676203] xgene-ahci APMC0D0D:01: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 4.685069] xgene-ahci APMC0D0D:01: flags: 64bit sntf pm only pmp fbs pio slum part ccc [ 4.693201] xgene-ahci APMC0D0D:01: port 0 is not capable of FBS [ 4.693880] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 4.706842] xgene-ahci APMC0D0D:01: port 1 is not capable of FBS [ 4.714376] scsi host2: xgene-ahci [ 4.718239] scsi host3: xgene-ahci [ 4.721961] ata3: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x100 irq 28 [ 4.729850] ata4: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x180 irq 28 [ 4.738769] libphy: APM X-Gene MDIO bus: probed [ 4.791711] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:46:ce:08 [ 4.799622] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.806511] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008 [ 4.808607] xgene-enet APMC0D05:00: clocks have been setup already [ 4.821883] e1000e 0000:01:00.0 enp1s0: renamed from eth0 [ 5.011899] xgene-enet APMC0D30:00: clocks have been setup already [ 5.063242] ata3: SATA link down (SStatus 0 SControl 4300) [ 5.068752] ata4: SATA link down (SStatus 0 SControl 4300) [ 5.121895] xgene-enet APMC0D30:01: clocks have been setup already [ 5.136261] xgene-enet APMC0D31:00: clocks have been setup already [ 5.331836] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 4300) [ 5.338118] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 4300) [ 5.344486] ata2.00: ATA-8: Corsair Neutron GTX SSD, M311, max UDMA/133 [ 5.351098] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 5.357813] ata1.00: ATA-8: Corsair Neutron GTX SSD, M311, max UDMA/133 [ 5.364432] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 5.371105] ata2.00: configured for UDMA/133 [ 5.375470] ata1.00: configured for UDMA/133 [ 5.380021] scsi 0:0:0:0: Direct-Access ATA Corsair Neutron M311 PQ: 0 ANSI: 5 [ 5.482145] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.482607] scsi 1:0:0:0: Direct-Access ATA Corsair Neutron M311 PQ: 0 ANSI: 5 [ 5.498165] sd 0:0:0:0: [sda] Write Protect is off [ 5.502945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.502986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.514451] sda: sda1 sda2 sda3 [ 5.518153] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.602396] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 5.609881] sd 1:0:0:0: [sdb] Write Protect is off [ 5.614681] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.614739] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.626189] sdb: sdb1 [ 5.628980] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.113010] random: fast init done [ 6.461233] SGI XFS with ACLs, security attributes, no debug enabled [ 6.471638] XFS (dm-0): Mounting V5 Filesystem [ 6.501907] XFS (dm-0): Ending clean mount [ 7.216272] systemd-journald[201]: Received SIGTERM from PID 1 (systemd). [ 7.263513] systemd: 20 output lines suppressed due to ratelimiting [ 7.301701] audit: type=1404 audit(1493396679.060:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 7.410911] SELinux: 32768 avtab hash slots, 105786 rules. [ 7.516206] SELinux: 32768 avtab hash slots, 105786 rules. [ 7.718524] SELinux: 8 users, 14 roles, 4990 types, 304 bools, 1 sens, 1024 cats [ 7.718542] SELinux: 94 classes, 105786 rules [ 7.741338] SELinux: Class sctp_socket not defined in policy. [ 7.747177] SELinux: Class icmp_socket not defined in policy. [ 7.753000] SELinux: Class ax25_socket not defined in policy. [ 7.758809] SELinux: Class ipx_socket not defined in policy. [ 7.764542] SELinux: Class netrom_socket not defined in policy. [ 7.770524] SELinux: Class atmpvc_socket not defined in policy. [ 7.776515] SELinux: Class x25_socket not defined in policy. [ 7.782247] SELinux: Class rose_socket not defined in policy. [ 7.788056] SELinux: Class decnet_socket not defined in policy. [ 7.794048] SELinux: Class atmsvc_socket not defined in policy. [ 7.800028] SELinux: Class rds_socket not defined in policy. [ 7.805760] SELinux: Class irda_socket not defined in policy. [ 7.811568] SELinux: Class pppox_socket not defined in policy. [ 7.817473] SELinux: Class llc_socket not defined in policy. [ 7.823204] SELinux: Class can_socket not defined in policy. [ 7.828926] SELinux: Class tipc_socket not defined in policy. [ 7.834744] SELinux: Class bluetooth_socket not defined in policy. [ 7.840984] SELinux: Class iucv_socket not defined in policy. [ 7.846802] SELinux: Class rxrpc_socket not defined in policy. [ 7.852707] SELinux: Class isdn_socket not defined in policy. [ 7.858514] SELinux: Class phonet_socket not defined in policy. [ 7.864504] SELinux: Class ieee802154_socket not defined in policy. [ 7.870831] SELinux: Class caif_socket not defined in policy. [ 7.876649] SELinux: Class alg_socket not defined in policy. [ 7.882381] SELinux: Class nfc_socket not defined in policy. [ 7.888103] SELinux: Class vsock_socket not defined in policy. [ 7.894008] SELinux: Class kcm_socket not defined in policy. [ 7.899730] SELinux: Class qipcrtr_socket not defined in policy. [ 7.905822] SELinux: Class smc_socket not defined in policy. [ 7.911545] SELinux: the above unknown classes and permissions will be allowed [ 7.918772] SELinux: Completing initialization. [ 7.918776] SELinux: Setting up existing superblocks. [ 7.993509] audit: type=1403 audit(1493396679.760:3): policy loaded auid=4294967295 ses=4294967295 [ 8.002331] systemd[1]: Successfully loaded SELinux policy in 701.052ms. [ 8.029233] systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. [ 8.076262] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.081619] systemd[1]: Inserted module 'ip_tables' [ 8.199798] systemd[1]: Relabelled /dev and /run in 108.385ms. [ 8.666128] systemd-journald[618]: Received request to flush runtime journal from PID 1 [ 8.793125] xgene-slimpro-i2c APMC0D40:00: i2c mailbox channel request failed [ 8.809689] RPC: Registered named UNIX socket transport module. [ 8.815634] RPC: Registered udp transport module. [ 8.820316] RPC: Registered tcp transport module. [ 8.825018] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.872038] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.877502] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 8.883774] xgene-slimpro-hwmon APMC0D29:00: APM X-Gene SoC HW monitor driver registered [ 8.892777] xgene-rng APMC0D18:00: Couldn't get the clock for RNG [ 8.899408] xgene-slimpro-mbox APMC0D01:00: APM X-Gene SLIMpro MailBox registered [ 8.910481] xgene-gpio-sb APMC0D15:00: Support 22 gpios, 6 irqs start from pin 8 [ 8.918470] xgene-gpio-sb APMC0D15:00: X-Gene GPIO Standby driver registered [ 9.044885] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 9.118751] XFS (sda2): Mounting V5 Filesystem [ 9.125864] Adding 8388544k swap on /dev/mapper/rhelp_dhcp--171-swap. Priority:-1 extents:1 across:8388544k SSFS [ 9.141179] XFS (sda2): Ending clean mount [ 9.286221] XFS (dm-2): Mounting V5 Filesystem [ 9.305151] XFS (dm-2): Ending clean mount [ 10.242361] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 10.339596] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 10.367672] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.374758] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.403220] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.410389] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.437608] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 10.444895] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 10.471938] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.478809] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 10.562700] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 10.571438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.580052] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.588624] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 10.597191] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 11.412166] xgene-enet APMC0D05:00 eth0: Link is Down [ 11.492472] xgene-enet APMC0D30:00 eth1: Link is Down [ 11.497600] xgene-enet APMC0D30:01 eth2: Link is Down [ 14.533303] e1000e: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.541337] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 14.548556] xgene-enet APMC0D05:00 eth0: Link is Up - 1Gbps/Full - flow control off [ 14.556244] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
