From: Keerthy <j-keerthy@xxxxxx>
Currently devm_request_irq is being called before base, pci fields
of dra7xx_pcie structure are populated. It is called even before
pm_runtime_enable and pm_runtime_get_sync are called. This will
lead to exceptions if in case an interrupt is triggered before
the all of the above are done. Hence push the devm_request_irq
call to the end of the probe.
Signed-off-by: Keerthy <j-keerthy@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/pci/dwc/pci-dra7xx.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index c6fef0a..8c53233 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -410,13 +410,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
return -EINVAL;
}
- ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
- IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
- if (ret) {
- dev_err(dev, "failed to request irq\n");
- return ret;
- }
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
base = devm_ioremap_nocache(dev, res->start, resource_size(res));
if (!base)
@@ -478,6 +471,13 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
if (ret < 0)
goto err_gpio;
+ ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+ IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+ if (ret) {
+ dev_err(dev, "failed to request irq\n");
+ goto err_gpio;
+ }
+
return 0;
err_gpio:
--
1.7.9.5
