On Mon, Feb 27, 2017 at 05:08:44PM +0900, Ethan Zhao wrote:
> QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD
> access issue too, while read the common pci-sysfs access interface shown as
>
> /sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd
>
> with simple 'cat' could cause system hang and panic:
>
> [ 48.219586] Kernel panic - not syncing: An NMI occurred. Depending on your system
> the reason for the NMI is logged in any one of the following resources:
> [ 48.219586] 1. Integrated Management Log (IML)
> [ 48.219586] 2. OA Syslog
> [ 48.219586] 3. OA Forward Progress Log
> [ 48.219586] 4. iLO Event Log
> [ 48.352034] CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12
> [ 48.390989] Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
> [ 48.431201] 0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de
> [ 48.467185] ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072
> [ 48.502631] 0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51
> [ 48.538427] Call Trace:
> [ 48.549991] <NMI> [<ffffffff817193de>] dump_stack+0x63/0x81
> [ 48.577496] [<ffffffff81714072>] panic+0xd0/0x20e
> [ 48.600598] [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt]
> [ 48.630913] [<ffffffff81021fc9>] ? sched_clock+0x9/0x10
> [ 48.656286] [<ffffffff8101c101>] nmi_handle+0x91/0x170
> [ 48.681362] [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170
> [ 48.707383] [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0
> [ 48.733603] [<ffffffff8101c719>] default_do_nmi+0x99/0x140
> [ 48.759570] [<ffffffff8101c8b4>] do_nmi+0xf4/0x170
> [ 48.782977] [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e
> [ 48.809290] [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
> [ 48.837782] [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
> [ 48.865045] [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
> [ 48.892877] <<EOE>> [<ffffffff815db4b3>] raw_pci_read+0x23/0x40
> [ 48.923060] [<ffffffff815db4fc>] pci_read+0x2c/0x30
> [ 48.947340] [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110
> [ 48.978937] [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130
> [ 49.007983] [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0
> [ 49.036370] [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30
> [ 49.062608] [<ffffffff8137d590>] read_vpd_attr+0x30/0x40
> [ 49.088627] [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70
> [ 49.116383] [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180
> [ 49.143396] [<ffffffff8120dd97>] __vfs_read+0x37/0x100
> [ 49.169059] [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0
> [ 49.200526] [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0
> [ 49.227578] [<ffffffff8120e476>] vfs_read+0x86/0x140
> [ 49.252842] [<ffffffff8120f3f5>] SyS_read+0x55/0xd0
> [ 49.277378] [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71
> [ 50.349812] Shutting down cpus with NMI
> [ 50.368388] Kernel Offset: disabled
> [ 50.385327] drm_kms_helper: panic occurred, switching back to text console
>
> So blacklist the access to its VPD.
>
> Signed-off-by: Ethan Zhao <ethan.zhao@xxxxxxxxxx>
Applied to for-linus for v4.11, thanks!
I added a stable tag for v4.6+ because quirk_blacklist_vpd() was added
by 7c20078a8197 ("PCI: Prevent VPD access for buggy devices"), which
appeared in v4.6.
> ---
> drivers/pci/quirks.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 3a035e07..087a218 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -2173,6 +2173,7 @@ static void quirk_blacklist_vpd(struct pci_dev *dev)
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
> quirk_blacklist_vpd);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
>
> /*
> * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
> --
> 1.8.3.1
>
