On Tue, 21 Feb 2017 12:04:24 -0500
Sinan Kaya <okaya@xxxxxxxxxxxxxx> wrote:
> Hi Alex,
>
> I'm coming back to work on this.
>
> On 10/3/2016 1:37 AM, Sinan Kaya wrote:
> > An endpoint is allowed to issue CRS following an FLR request to indicate
> > that it is not ready to accept new requests. Changing the polling mechanism
> > in FLR wait function to go read the vendor ID instead of the command/status
> > register. A CRS indication will only be given if the address to be read is
> > vendor ID.
> >
> > Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
> > ---
> > drivers/pci/pci.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index c8749b9..7580b00 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -3725,7 +3725,8 @@ static void pci_flr_wait(struct pci_dev *dev)
> >
> > do {
> > msleep(100);
> > - pci_read_config_dword(dev, PCI_COMMAND, &id);
>
> Your comment here puzzled me.
>
> https://patchwork.kernel.org/patch/8331851/
>
> "Self nak on this one, didn't account for VFs not implementing the first
> dword. Thanks,"
>
> I'm trying to add Configuration Request Retry Status (CRS) support to FLR
> with this patch.
>
> Basically, the root port will return 0xFFFF0001 only when a config read
> request is sent to the vendor ID register and CRS visibility is set.
> The SW needs to poll until this special read ID disappears. See the
> implementation note on Configuration Request Retry Status in PCIE
> specification for details.
>
> pci_bus_read_dev_vendor_id implements this loop for us.
>
> You are saying that there are VFs that do not implement vendor ID register.
> Can you give some history on this?
SR-IOV spec rev 1.1, 3.4.1.1 & 3.4.1.2, Vendor ID and Device ID fields
for the VF return 0xFFFF when read. The "Virtualization Intermediary"
is supposed to use the vendor ID from the PF and the device ID defined
in the PF SR-IOV capability.
>
> > + pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &id,
> > + 60 * 1000);
> > } while (i++ < 10 && id == ~0);
pci_bus_read_dev_vendor_id() seems like it will return false with an
id value of ~0 for a functional VF, so this loop will spin longer than
necessary and report an invalid error. Patch 1/2 from this series
would cause pci_dev_restore() to be a no-op on VFs. Thanks,
Alex
