> On 03/02/17 12:16, Bharat Kumar Gogada wrote:
> >> On 03/02/17 11:08, Bharat Kumar Gogada wrote:
> >>> - Adding mutex lock for protecting legacy mask register
> >>> - Few wifi end points which only support legacy interrupts, performs
> >>> hardware reset functionalities after disabling interrupts by
> >>> invoking disable_irq and then re-enable using enable_irq, they
> >>> enable hardware interrupts first and then virtual irq line later.
> >>> - The legacy irq line goes low only after DEASSERT_INTx is
> >>> received.As the legacy irq line is high immediately after hardware
> >>> interrupts are enabled but virq of EP is still in disabled state and
> >>> EP handler is never executed resulting no DEASSERT_INTx.If dummy irq
> >>> chip is used, interrutps are not masked and system is hanging with CPU stall.
> >>> - Adding irq chip functions instead of dummy irq chip for legacy
> >>> interrupts.
> >>> - Legacy interrupts are level sensitive, so using handle_level_irq
> >>> is more appropriate as it is masks interrupts until End point
> >>> handles interrupts and unmasks interrutps after End point handler is
> executed.
> >>> - Legacy interrupts are level triggered, virtual irq line of End
> >>> Point shows as edge in /proc/interrupts.
> >>> - Setting irq flags of virtual irq line of EP to level triggered at
> >>> the time of mapping.
> >>>
> >>> Signed-off-by: Bharat Kumar Gogada <bharatku@xxxxxxxxxx>
> >>> ---
> >>> drivers/pci/host/pcie-xilinx-nwl.c | 45
> >> +++++++++++++++++++++++++++++++++++-
> >>> 1 files changed, 44 insertions(+), 1 deletions(-)
> >>>
> >>> diff --git a/drivers/pci/host/pcie-xilinx-nwl.c
> >>> b/drivers/pci/host/pcie-xilinx-nwl.c
> >>> index 43eaa4a..e4605f9 100644
> >>> --- a/drivers/pci/host/pcie-xilinx-nwl.c
> >>> +++ b/drivers/pci/host/pcie-xilinx-nwl.c
> >>> @@ -184,6 +184,7 @@ struct nwl_pcie {
> >>> u8 root_busno;
> >>> struct nwl_msi msi;
> >>> struct irq_domain *legacy_irq_domain;
> >>> + spinlock_t leg_mask_lock;
> >>> };
> >>>
> >>> static inline u32 nwl_bridge_readl(struct nwl_pcie *pcie, u32 off)
> >>> @@
> >>> -395,11 +396,52 @@ static void nwl_pcie_msi_handler_low(struct
> >>> irq_desc
> >> *desc)
> >>> chained_irq_exit(chip, desc);
> >>> }
> >>>
> >>> +static void nwl_mask_leg_irq(struct irq_data *data) {
> >>> + struct irq_desc *desc = irq_to_desc(data->irq);
> >>> + struct nwl_pcie *pcie;
> >>> + unsigned long flags;
> >>> + u32 mask;
> >>> + u32 val;
> >>> +
> >>> + pcie = irq_desc_get_chip_data(desc);
> >>> + mask = 1 << (data->hwirq - 1);
> >>> + spin_lock_irqsave(&pcie->leg_mask_lock, flags);
> >>
> >> I've asked you to use a raw spinlock for a reason. If using RT, this
> >> gets turned into a sleeping lock...
> >>
> > In include/linux/spinlock.h
> > #define spin_lock_irqsave(lock, flags) \
> > do { \
> > raw_spin_lock_irqsave(spinlock_check(lock), flags); \
> > } while (0)
> >
> > The above API invokes raw_spin_lock_irqsave know.
> > So is there any difference between raw_spin_lock_irqsave and
> spin_lock_irqsave ?
>
> When using RT, yes. RT upgrades all spinlocks to sleeping locks. We're trying
> hard not to break RT, despite most of it not being merged yet. So your patch will
> work on mainline Linux, and will break horribly on Linux/RT.
>
> So please, turn this into a raw spinlock as requested.
Thanks for the explanation, will do it.
Regards,
Bharat
