Am Mittwoch, den 01.02.2017, 08:55 -0800 schrieb Andrey Smirnov:
> Some designs implement reset GPIO via a GPIO expander connected to a
> peripheral bus. One such example would be i.MX7 Sabre board where said
> GPIO is provided by SPI shift register connected to a bitbanged SPI
> bus. In order to support such designs allow reset GPIO request to defer
> probing of the driver.
>
> Cc: yurovsky@xxxxxxxxx
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> drivers/pci/host/pci-imx6.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index 50a1291..3ef8093 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c
> @@ -611,7 +611,7 @@ static int __init imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
> return 0;
> }
>
> -static int __init imx6_pcie_probe(struct platform_device *pdev)
> +static int imx6_pcie_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct imx6_pcie *imx6_pcie;
> @@ -653,6 +653,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
> dev_err(dev, "unable to get reset gpio\n");
> return ret;
> }
> + } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> + return imx6_pcie->reset_gpio;
> }
>
> /* Fetch clocks */
> @@ -746,11 +748,12 @@ static struct platform_driver imx6_pcie_driver = {
> .name = "imx6q-pcie",
> .of_match_table = imx6_pcie_of_match,
> },
> + .probe = imx6_pcie_probe,
> .shutdown = imx6_pcie_shutdown,
> };
>
> static int __init imx6_pcie_init(void)
> {
> - return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
> + return platform_driver_register(&imx6_pcie_driver);
> }
> device_initcall(imx6_pcie_init);
