On 29/01/17 17:53, Sinan Kaya wrote: > On 1/24/2017 7:37 AM, Lorenzo Pieralisi wrote: >> [+hanjun, tomasz, sinan] >> >> It is quite a key patchset, I would be glad if they can test on their >> respective platforms with IORT. >> > > Tested on top of 4.10-rc5. > > 1. Platform Hidma device passed dmatest > 2. Seeing some USB stalls on a platform USB device. > 3. PCIe NVME drive probed and worked fine with MSI interrupts after boot. > 4. NVMe driver didn't probe following a hotplug insertion and received an > SMMU error event during the insertion. What was the SMMU error - a translation/permission fault (implying the wrong DMA ops) or a bad STE fault (implying we totally failed to tell the SMMU about the device at all)? Robin. > > /sys/bus/pci/slots/4 # > /sys/bus/pci/slots/4 # dmesg | grep nvme > [ 14.041357] nvme nvme0: pci function 0003:01:00.0 > [ 198.399521] nvme nvme0: pci function 0003:01:00.0 > [__198.416232]_nvme_0003:01:00.0:_enabling_device_(0000_->_0002) > [ 264.402216] nvme nvme0: I/O 228 QID 0 timeout, disable controller > [ 264.402313] nvme nvme0: Identify Controller failed (-4) > [ 264.421270] nvme nvme0: Removing after probe failure status: -5 > /sys/bus/pci/slots/4 # > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
