Re: [PATCH 2/4] Documetation: samsung-phy: add the exynos-pcie-phy binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/04/2017 03:05 AM, Rob Herring wrote:
> On Wed, Dec 28, 2016 at 07:34:52PM +0900, Jaehoon Chung wrote:
>> Adds the exynos-pcie-phy binding for Exynos PCIe PHY.
>> This is for using generic PHY framework.
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/phy/samsung-phy.txt        | 23 ++++++++++++++++++++++
>>  1 file changed, 23 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> index 9872ba8..1cbc15f 100644
>> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
>> @@ -191,3 +191,26 @@ Example:
>>  		usbdrdphy0 = &usb3_phy0;
>>  		usbdrdphy1 = &usb3_phy1;
>>  	};
>> +
>> +Samsung Exynos SoC series PCIe PHY controller
>> +--------------------------------------------------
>> +Required properties:
>> +- compatible : Should be set to "samsung,exynos5440-pcie-phy"
>> +- #phy-cells : Must be zero
>> +- reg : a register used by phy driver.
>> +
>> +Required properies for child node:
>> +- reg : a block register used by phy driver.
> 
> There's no need for this. Either just make the length 0x1040 or add a 
> 2nd address to the parent reg prop.

Will use the 2nd address to the parent reg prop.
Because there are two pcie-phy for Exynos5440.
one block register is started from 0x271000, the other is started from 0x271040.

Best Regards,
Jaehoon Chung

> 
>> +
>> +Example:
>> +	pcie_phy0: pcie-phy@270000 {
>> +		#phy-cells = <0>;
>> +		compatible = "samsung,exynos5440-pcie-phy";
>> +		reg = <0x270000 0x1000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +		block@271000 {
>> +			reg = <0x271000 0x40>;
>> +		};
>> +	};
>> -- 
>> 2.10.2
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux