The configuration data provided by an MCFG region (ie PCI segment and
bus range) may span multiple host bridges.
Current code in pci_mcfg_lookup() carries out an exact match of host
bridge bus range start value against the MCFG region(s) bus range start
value which would cause configurations like the following:
MCFG region:
bus range: 0x00~0xff.
segment: 0.
PCI host bridges configuration (segment numbers and bus ranges):
host bridge 1:
bus range: 0x00~0x1f.
segment: 0.
host bridge 2:
bus range: 0x20~0x4f.
segment: 0.
to fail, in that the bus range start value for host bridge 2 does
not match the bus range start value of the respective MCFG region.
Relax the bus range check in pci_mcfg_lookup() to cater for
PCI configurations with multiple host bridges sharing the same
MCFG region.
Signed-off-by: Zhou Wang <wangzhou1@xxxxxxxxxxxxx>
Reviewed-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
---
drivers/acpi/pci_mcfg.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index a6a4cea..2944353 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -195,11 +195,10 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
goto skip_lookup;
/*
- * We expect exact match, unless MCFG entry end bus covers more than
- * specified by caller.
+ * We expect the range in bus_res in the coverage of MCFG bus range.
*/
list_for_each_entry(e, &pci_mcfg_list, list) {
- if (e->segment == seg && e->bus_start == bus_res->start &&
+ if (e->segment == seg && e->bus_start <= bus_res->start &&
e->bus_end >= bus_res->end) {
root->mcfg_addr = e->addr;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
