Re: [PATCH V5 2/2] PCI/ACPI: hisi: Add ACPI support for HiSilicon SoCs Host Controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi guys,

On Fri, Nov 18, 2016 at 05:22:31PM +0800, Dongdong Liu wrote:
> PCIe controller in Hip05/HIP06/HIP07 SoCs is not ECAM compliant.
> It is non ECAM only for the RC bus config space;for any other bus
> underneath the root bus we support ECAM access.
> Add specific quirks for PCI config space accessors.This involves:
> 1. New initialization call hisi_pcie_init() to obtain rc base
> addresses from PNP0C02 at the root of the ACPI namespace (under \_SB).
> 2. New entry in common quirk array.

This is great!  I think we're almost there.

The only real technical issue I see is that based on the logs at
https://bugzilla.kernel.org/show_bug.cgi?id=187961 (thank you very
much for them!), there is no _CRS description of the ECAM space.

You have a PNP0C02 device for every host bridge, which is good.  It
describes the RC register space, as it should.  But it should *also*
describe the ECAM space, which it currently does not.

The result is this in /proc/iomem:

  a0200000-a020ffff : pnp 00:01           # PCI1 registers, from _CRS
  a0090000-a009ffff : pnp 00:00           # PCI0 registers, from _CRS
  a00a0000-a00affff : pnp 00:02           # PCI2 registers, from _CRS
  a8000000-a9ffffff : PCI ECAM            # pci/ecam.c request for PCI2
  b0000000-b1ffffff : PCI ECAM            # pci/ecam.c request for PCI0
  be000000-bfffffff : PCI ECAM            # pci/ecam.c request for PCI1

We *should* have this:

  a0200000-a020ffff : pnp 00:01           # PCI1 registers, from _CRS
  a0090000-a009ffff : pnp 00:00           # PCI0 registers, from _CRS
  a00a0000-a00affff : pnp 00:02           # PCI2 registers, from _CRS
  a8000000-a9ffffff : pnp 00:02           # PCI2 ECAM space, from _CRS
    a8000000-a9ffffff : PCI ECAM          # pci/ecam.c request for PCI2
  b0000000-b1ffffff : pnp 00:00           # PCI0 ECAM space, from _CRS
    b0000000-b1ffffff : PCI ECAM          # pci/ecam.c request for PCI0
  be000000-bfffffff : pnp 00:01           # PCI1 ECAM space, from _CRS
    be000000-bfffffff : PCI ECAM          # pci/ecam.c request for PCI1

If you add the ECAM space to the HISI0081 _CRS and it doesn't change
the /proc/iomem contents, don't worry.  Those "pnp 00:xx" reservations
are done by pnp/system.c, and we currently do those out of order
(after the ECAM requests), so they might fail.  For example, on my x86
laptop, I have this:

  PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved

Another minor comment/question below.

> Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> ---
>  MAINTAINERS                       |   1 +
>  drivers/acpi/pci_mcfg.c           |  13 ++++
>  drivers/pci/host/Kconfig          |   8 +++
>  drivers/pci/host/Makefile         |   1 +
>  drivers/pci/host/pcie-hisi-acpi.c | 124 ++++++++++++++++++++++++++++++++++++++
>  include/linux/pci-ecam.h          |   5 ++
>  6 files changed, 152 insertions(+)
>  create mode 100644 drivers/pci/host/pcie-hisi-acpi.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1cd38a7..b224caa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9358,6 +9358,7 @@ L:	linux-pci@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
>  F:	drivers/pci/host/pcie-hisi.c
> +F:	drivers/pci/host/pcie-hisi-acpi.c
>  
>  PCIE DRIVER FOR ROCKCHIP
>  M:	Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index ac21db3..b1b6fc7 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -57,6 +57,19 @@ struct mcfg_fixup {
>  	{ "QCOM  ", "QDF2432 ", 1, 5, MCFG_BUS_ANY, &pci_32b_ops },
>  	{ "QCOM  ", "QDF2432 ", 1, 6, MCFG_BUS_ANY, &pci_32b_ops },
>  	{ "QCOM  ", "QDF2432 ", 1, 7, MCFG_BUS_ANY, &pci_32b_ops },
> +#ifdef CONFIG_PCI_HISI_ACPI
> +	#define PCI_ACPI_QUIRK_QUAD_DOM(table_id, seg, ops) \
> +	{ "HISI  ", table_id, 0, seg + 0, MCFG_BUS_ANY, ops }, \
> +	{ "HISI  ", table_id, 0, seg + 1, MCFG_BUS_ANY, ops }, \
> +	{ "HISI  ", table_id, 0, seg + 2, MCFG_BUS_ANY, ops }, \
> +	{ "HISI  ", table_id, 0, seg + 3, MCFG_BUS_ANY, ops }
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP05   ", 0, &hisi_pcie_ops),
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP06   ", 0, &hisi_pcie_ops),
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 0, &hisi_pcie_ops),
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 4, &hisi_pcie_ops),
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 8, &hisi_pcie_ops),
> +	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
> +#endif
>  };
>  
>  static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index ae98644..9ff2bcd 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -227,6 +227,14 @@ config PCI_HISI
>  	  Say Y here if you want PCIe controller support on HiSilicon
>  	  Hip05 and Hip06 and Hip07 SoCs
>  
> +config PCI_HISI_ACPI
> +	depends on ACPI && ARM64
> +	bool "HiSilicon Hip05 and Hip06 and Hip07 SoCs ACPI PCIe controllers"
> +	select PNP
> +	help
> +	  Say Y here if you want ACPI PCIe controller support on HiSilicon
> +	  Hip05 and Hip06 and Hip07 SoCs

I'm not sure about this Kconfig setup.  Do we really want to force
people to enable a special config option to get this support?

I'm comparing it in my mind with other PCI quirks.  They're all
enabled as a group by CONFIG_PCI_QUIRKS.  Ultimately we want an ACPI
kernel to work without requiring any platform-specific config options.

I'm wondering if we should consolidate all the ECAM quirk code in a
single place (maybe pci/ecam-quirks.c, pci/ecam.c, or pci/pci-acpi.c),
under a config option like CONFIG_PCI_ECAM_QUIRKS or maybe even plain
CONFIG_PCI_QUIRKS (of course, it could still be qualified by
CONFIG_ACPI and CONFIG_ARM64).

>  config PCIE_QCOM
>  	bool "Qualcomm PCIe controller"
>  	depends on ARCH_QCOM && OF
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 084cb49..9402858 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
>  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
>  obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
>  obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
> +obj-$(CONFIG_PCI_HISI_ACPI) += pcie-hisi-acpi.o
>  obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
>  obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
>  obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
> diff --git a/drivers/pci/host/pcie-hisi-acpi.c b/drivers/pci/host/pcie-hisi-acpi.c
> new file mode 100644
> index 0000000..358c7c9
> --- /dev/null
> +++ b/drivers/pci/host/pcie-hisi-acpi.c
> @@ -0,0 +1,124 @@
> +/*
> + * PCIe host controller driver for HiSilicon HipXX SoCs
> + *
> + * Copyright (C) 2016 HiSilicon Co., Ltd. http://www.hisilicon.com
> + *
> + * Author: Dongdong Liu <liudongdong3@xxxxxxxxxx>
> + *         Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/pci.h>
> +#include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
> +#include "../pci.h"
> +
> +static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> +				  int size, u32 *val)
> +{
> +	struct pci_config_window *cfg = bus->sysdata;
> +	int dev = PCI_SLOT(devfn);
> +
> +	if (bus->number == cfg->busr.start) {
> +		/* access only one slot on each root port */
> +		if (dev > 0)
> +			return PCIBIOS_DEVICE_NOT_FOUND;
> +		else
> +			return pci_generic_config_read32(bus, devfn, where,
> +							 size, val);
> +	}
> +
> +	return pci_generic_config_read(bus, devfn, where, size, val);
> +}
> +
> +static int hisi_pcie_acpi_wr_conf(struct pci_bus *bus, u32 devfn,
> +				  int where, int size, u32 val)
> +{
> +	struct pci_config_window *cfg = bus->sysdata;
> +	int dev = PCI_SLOT(devfn);
> +
> +	if (bus->number == cfg->busr.start) {
> +		/* access only one slot on each root port */
> +		if (dev > 0)
> +			return PCIBIOS_DEVICE_NOT_FOUND;
> +		else
> +			return pci_generic_config_write32(bus, devfn, where,
> +							  size, val);
> +	}
> +
> +	return pci_generic_config_write(bus, devfn, where, size, val);
> +}
> +
> +static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
> +				       int where)
> +{
> +	struct pci_config_window *cfg = bus->sysdata;
> +	void __iomem *reg_base = cfg->priv;
> +
> +	if (bus->number == cfg->busr.start)
> +		return reg_base + where;
> +	else
> +		return pci_ecam_map_bus(bus, devfn, where);
> +}
> +
> +/*
> + * Retrieve RC base and size from PNP0C02 at the root of the ACPI namespace
> + * (under \_SB).
> + * Scope(_SB)
> + * {
> + *   Device (PCI0)
> + *   {
> + *     Name(_HID, "PNP0A08")
> + *     Name(_CID, "PNP0A03")
> + *     Name(_SEG, 0)
> + *     ......
> + *   }
> + *   Device (RES0)
> + *   {
> + *     Name(_HID, "HISI0081")
> + *     Name(_CID, "PNP0C02")
> + *     Name(_UID, 0x0)
> + *     Name(_CRS, ResourceTemplate (){
> + *       Memory32Fixed (ReadWrite, 0xa0090000, 0x10000)
> + *     })
> + *   }
> + *   ......
> + * }
> + */
> +static int hisi_pcie_init(struct pci_config_window *cfg)
> +{
> +	struct acpi_device *adev = to_acpi_device(cfg->parent);
> +	struct acpi_pci_root *root = acpi_driver_data(adev);
> +	void __iomem *reg_base;
> +	struct resource *res;
> +	int ret;
> +
> +	res = devm_kzalloc(&adev->dev, sizeof(*res), GFP_KERNEL);
> +	if (!res)
> +		return -ENOMEM;
> +
> +	ret = acpi_get_rc_resources("HISI0081", root->segment, res);
> +	if (ret) {
> +		dev_err(&adev->dev, "can't get rc base address");
> +		return ret;
> +	}
> +
> +	reg_base = devm_ioremap(&adev->dev, res->start, resource_size(res));
> +	if (!reg_base)
> +		return -ENOMEM;
> +
> +	cfg->priv = reg_base;
> +	return 0;
> +}
> +
> +struct pci_ecam_ops hisi_pcie_ops = {
> +	.bus_shift    = 20,
> +	.init         =  hisi_pcie_init,
> +	.pci_ops      = {
> +		.map_bus    = hisi_pcie_map_bus,
> +		.read       = hisi_pcie_acpi_rd_conf,
> +		.write      = hisi_pcie_acpi_wr_conf,
> +	}
> +};
> diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
> index f5740b7..1b24d97 100644
> --- a/include/linux/pci-ecam.h
> +++ b/include/linux/pci-ecam.h
> @@ -67,4 +67,9 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
>  int pci_host_common_probe(struct platform_device *pdev,
>  			  struct pci_ecam_ops *ops);
>  #endif
> +
> +#ifdef CONFIG_PCI_HISI_ACPI
> +extern struct pci_ecam_ops hisi_pcie_ops;
> +#endif
> +
>  #endif
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux