Re: [PATCH V4 2/2] PCI/ACPI: hisi: Add ACPI support for HiSilicon SoCs Host Controllers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn

Many Thanks for your review

在 2016/11/15 7:33, Bjorn Helgaas 写道:
On Wed, Nov 09, 2016 at 05:14:57PM +0800, Dongdong Liu wrote:
PCIe controller in Hip05/HIP06/HIP07 SoCs is not ECAM compliant.
It is non ECAM only for the RC bus config space;for any other bus
underneath the root bus we support ECAM access.
Add specific quirks for PCI config space accessors.This involves:
1. New initialization call hisi_pcie_init() to obtain rc base
addresses from PNP0C02 as subdevice of PNP0A03.
2. New entry in common quirk array.

Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
---
 MAINTAINERS                       |   1 +
 drivers/acpi/pci_mcfg.c           |  13 ++++
 drivers/pci/host/Kconfig          |   8 ++
 drivers/pci/host/Makefile         |   1 +
 drivers/pci/host/pcie-hisi-acpi.c | 157 ++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ecam.h          |   5 ++
 6 files changed, 185 insertions(+)
 create mode 100644 drivers/pci/host/pcie-hisi-acpi.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 1cd38a7..b224caa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9358,6 +9358,7 @@ L:	linux-pci@xxxxxxxxxxxxxxx
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 F:	drivers/pci/host/pcie-hisi.c
+F:	drivers/pci/host/pcie-hisi-acpi.c

 PCIE DRIVER FOR ROCKCHIP
 M:	Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index ac21db3..b1b6fc7 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -57,6 +57,19 @@ struct mcfg_fixup {
 	{ "QCOM  ", "QDF2432 ", 1, 5, MCFG_BUS_ANY, &pci_32b_ops },
 	{ "QCOM  ", "QDF2432 ", 1, 6, MCFG_BUS_ANY, &pci_32b_ops },
 	{ "QCOM  ", "QDF2432 ", 1, 7, MCFG_BUS_ANY, &pci_32b_ops },
+#ifdef CONFIG_PCI_HISI_ACPI
+	#define PCI_ACPI_QUIRK_QUAD_DOM(table_id, seg, ops) \
+	{ "HISI  ", table_id, 0, seg + 0, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, seg + 1, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, seg + 2, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, seg + 3, MCFG_BUS_ANY, ops }
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP05   ", 0, &hisi_pcie_ops),
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP06   ", 0, &hisi_pcie_ops),
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 0, &hisi_pcie_ops),
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 4, &hisi_pcie_ops),
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 8, &hisi_pcie_ops),
+	PCI_ACPI_QUIRK_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
+#endif
 };

 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index ae98644..9ff2bcd 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -227,6 +227,14 @@ config PCI_HISI
 	  Say Y here if you want PCIe controller support on HiSilicon
 	  Hip05 and Hip06 and Hip07 SoCs

+config PCI_HISI_ACPI
+	depends on ACPI && ARM64
+	bool "HiSilicon Hip05 and Hip06 and Hip07 SoCs ACPI PCIe controllers"
+	select PNP
+	help
+	  Say Y here if you want ACPI PCIe controller support on HiSilicon
+	  Hip05 and Hip06 and Hip07 SoCs
+
 config PCIE_QCOM
 	bool "Qualcomm PCIe controller"
 	depends on ARCH_QCOM && OF
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 084cb49..9402858 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_PCI_HISI_ACPI) += pcie-hisi-acpi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
 obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
diff --git a/drivers/pci/host/pcie-hisi-acpi.c b/drivers/pci/host/pcie-hisi-acpi.c
new file mode 100644
index 0000000..aade4b5
--- /dev/null
+++ b/drivers/pci/host/pcie-hisi-acpi.c
@@ -0,0 +1,157 @@
+/*
+ * PCIe host controller driver for HiSilicon HipXX SoCs
+ *
+ * Copyright (C) 2016 HiSilicon Co., Ltd. http://www.hisilicon.com
+ *
+ * Author: Dongdong Liu <liudongdong3@xxxxxxxxxx>
+ *         Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
+
+#define DEBUG0				0x728
+#define PCIE_LTSSM_LINKUP_STATE		0x11
+#define PCIE_LTSSM_STATE_MASK		0x3F

These are now unused.

Thanks for pointing that, will delete them.


+static const struct acpi_device_id hisi_pcie_rc_res_ids[] = {
+	{"HISI0081", 0},
+	{"", 0},
+};
+
+static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+				  int size, u32 *val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_read32(bus, devfn, where,
+							 size, val);
+	}
+
+	return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+static int hisi_pcie_acpi_wr_conf(struct pci_bus *bus, u32 devfn,
+				  int where, int size, u32 val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_write32(bus, devfn, where,
+							  size, val);
+	}
+
+	return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+				       int where)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	void __iomem *reg_base = cfg->priv;
+
+	if (bus->number == cfg->busr.start)
+		return reg_base + where;
+	else
+		return pci_ecam_map_bus(bus, devfn, where);
+}
+
+/*
+ * Retrieve RC base and size from sub-device under the RC
+ * Device (RES1)
+ * {
+ *	Name (_HID, "HISI0081")
+ *	Name (_CID, "PNP0C02")
+ *	Name (_CRS, ResourceTemplate (){
+ *		Memory32Fixed (ReadWrite, 0xb0080000, 0x10000)
+ *	})
+ * }
+ */
+static int hisi_pcie_rc_addr_get(struct acpi_device *adev,
+				 void __iomem **addr)
+{
+	struct acpi_device *child_adev;
+	struct list_head list;
+	struct resource *res;
+	struct resource_entry *entry;
+	unsigned long flags;
+	int ret;
+
+	list_for_each_entry(child_adev, &adev->children, node) {
+		ret = acpi_match_device_ids(child_adev, hisi_pcie_rc_res_ids);
+		if (ret)
+			continue;
+
+		INIT_LIST_HEAD(&list);
+		flags = IORESOURCE_MEM;
+		ret = acpi_dev_get_resources(child_adev, &list,
+					     acpi_dev_filter_resource_type_cb,
+					     (void *)flags);
+		if (ret < 0) {
+			dev_err(&child_adev->dev,
+				"failed to parse _CRS method, error code %d\n",
+				ret);
+			return ret;
+		} else if (ret == 0) {
+			dev_err(&child_adev->dev,
+				"no IO and memory resources present in _CRS\n");
+			return -EINVAL;
+		}
+
+		entry = list_first_entry(&list, struct resource_entry, node);
+		res = entry->res;
+		*addr = devm_ioremap(&child_adev->dev,
+				     res->start, resource_size(res));
+		acpi_dev_free_resource_list(&list);
+		if (IS_ERR(*addr)) {
+			dev_err(&child_adev->dev, "error with ioremap\n");
+			return -ENOMEM;
+		}
+
+		return 0;
+	}
+
+	return -EINVAL;
+}

OK, so MCFG (with the possible help of quirks) tells us where *most*
of this RC's ECAM space is, but it doesn't tell us where the root bus
ECAM space is, which is why we need this block of ugly code.  Right?
Yes, correct.

Is there any way we can compute the root bus reg_base from the address
we got from MCFG?

No, we can not,because RC base addresses are sequntial and MCFG impose a 4k boundaries.

Is it a constant that realistically is not going to be modified?

Yes, this is a hardware limitation


I would rather have the PNP0C02 device at the root of the ACPI
namespace (under \_SB) if possible, the way x86 systems do it.
I don't know whether that's actually a requirement, but the PCI
Firmware Spec does suggest it, and it's better to follow that existing
practice whenever possible.

Ok, will fix it in PATCH V5.


I'm still looking for the specifics of how these resources are
described, i.e., a dmesg log, /proc/iomem, and maybe an ACPI dump.
These could go in a bugzilla entry, with a URL in this changelog.

Ok, will fix it in PATCH V5.

Thanks
Dongdong

+
+static int hisi_pcie_init(struct pci_config_window *cfg)
+{
+	int ret;
+	struct acpi_device *adev = to_acpi_device(cfg->parent);
+	void __iomem *reg_base;
+
+	ret = hisi_pcie_rc_addr_get(adev, &reg_base);
+	if (ret) {
+		dev_err(&adev->dev, "can't get rc base address");
+		return ret;
+	}
+
+	cfg->priv = reg_base;
+
+	return 0;
+}
+
+struct pci_ecam_ops hisi_pcie_ops = {
+	.bus_shift    = 20,
+	.init         =  hisi_pcie_init,
+	.pci_ops      = {
+		.map_bus    = hisi_pcie_map_bus,
+		.read       = hisi_pcie_acpi_rd_conf,
+		.write      = hisi_pcie_acpi_wr_conf,
+	}
+};
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index f5740b7..1b24d97 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -67,4 +67,9 @@ void __iomem *pci_ecam_map_bus(struct pci_bus *bus, unsigned int devfn,
 int pci_host_common_probe(struct platform_device *pdev,
 			  struct pci_ecam_ops *ops);
 #endif
+
+#ifdef CONFIG_PCI_HISI_ACPI
+extern struct pci_ecam_ops hisi_pcie_ops;
+#endif
+
 #endif
--
1.9.1


.


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux