Re: [PATCH v4 2/3] PCI: qcom: add support to msm8996 PCIE controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 15/11/16 12:24, Stanimir Varbanov wrote:
Hi Srini,

On 11/14/2016 01:15 PM, Srinivas Kandagatla wrote:
This patch adds support to msm8996/apq8096 pcie, MSM8996 supports
Gen 1/2, One lane, 3 pcie root-complex with support to MSI and
legacy interrupts and it conforms to PCI Express Base 2.1 specification.

This patch adds post_init callback to qcom_pcie_ops, as this is pcie
pipe clocks are only setup after the phy is powered on.
It also adds ltssm_enable callback as it is very much different to other
supported SOCs in the driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

With below comments addressed:

Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
Thanks for the ack.

---
 .../devicetree/bindings/pci/qcom,pcie.txt          |  67 +++++++-
 drivers/pci/host/pcie-qcom.c                       | 177 ++++++++++++++++++++-
 2 files changed, 238 insertions(+), 6 deletions(-)


<snip>

diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c
index 3593640..03ba6b1 100644
--- a/drivers/pci/host/pcie-qcom.c
+++ b/drivers/pci/host/pcie-qcom.c
@@ -36,11 +36,19 @@

 #include "pcie-designware.h"

+#define PCIE20_PARF_DBI_BASE_ADDR	0x168

This is already defined few rows below, please drop it.

Yep, will remove this.
+
+#define PCIE20_PARF_SYS_CTRL			0x00
 #define PCIE20_PARF_PHY_CTRL			0x40
 #define PCIE20_PARF_PHY_REFCLK			0x4C
 #define PCIE20_PARF_DBI_BASE_ADDR		0x168
 #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE		0x16c
+#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL	0x174
 #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT	0x178
+#define MSM8996_PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT   0x1A8

I don't like MSM8996_ prefix. Could you invent a macro which depending
on controller selects proper offset?

maybe some like this ??

#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2    0x1A8


--srini

+#define PCIE20_PARF_LTSSM			0x1B0
+#define PCIE20_PARF_SID_OFFSET			0x234
+#define PCIE20_PARF_BDF_TRANSLATE_CFG		0x24C

 #define PCIE20_ELBI_SYS_CTRL			0x04
 #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE		BIT(0)
@@ -72,9 +80,18 @@ struct qcom_pcie_resources_v1 {
 	struct regulator *vdda;
 };

+struct qcom_pcie_resources_v2 {
+	struct clk *aux_clk;
+	struct clk *master_clk;
+	struct clk *slave_clk;
+	struct clk *cfg_clk;
+	struct clk *pipe_clk;
+};

<snip>

regards,
Stan

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux