On 09/11/16 10:37, Vivek Gautam wrote:
Hi,
On Fri, Nov 4, 2016 at 6:29 PM, Srinivas Kandagatla
<srinivas.kandagatla@xxxxxxxxxx> wrote:
This patch adds support to msm8996/apq8096 pcie, MSM8996 supports
Gen 1/2, One lane, 3 pcie root-complex with support to MSI and
legacy interrupts and it conforms to PCI Express Base 2.1 specification.
This patch adds post_init callback to qcom_pcie_ops, as this is pcie
pipe clocks are only setup after the phy is powered on.
It also adds ltssm_enable callback as it is very much different to other
supported SOCs in the driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
Few minor nits.
.../devicetree/bindings/pci/qcom,pcie.txt | 68 +++++++-
drivers/pci/host/pcie-qcom.c | 177 ++++++++++++++++++++-
2 files changed, 239 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 4059a6f..4a0538d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -7,6 +7,7 @@
- "qcom,pcie-ipq8064" for ipq8064
- "qcom,pcie-apq8064" for apq8064
- "qcom,pcie-apq8084" for apq8084
+ - "qcom,pcie-msm8996" for msm8996 or apq8096
Since this works for both apq8096 and msm8996, compatible -
"qcom,pcie-apq8096" for uniformity ?
AFAIK, compatible is selected based on SOC on which this IP is
integrated first, So msm8996 seems to be correct, in that way.
Also if we look at clk controller compatible strings, you would see them
as *msm8996* rather than *8096*.
+
+static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+ struct device *dev = pcie->pp.dev;
+ u32 val;
+ int ret = 0;
you don't need to initialize ret here.
Yep, I will fix it.
+
+ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+ return ret;
+ }
[snip]
@@ -429,6 +571,17 @@ static int qcom_pcie_link_up(struct pcie_port *pp)
return !!(val & PCI_EXP_LNKSTA_DLLLA);
}
+static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
+{
+ struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+
+ clk_disable_unprepare(res->slave_clk);
+ clk_disable_unprepare(res->master_clk);
+ clk_disable_unprepare(res->cfg_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->pipe_clk);
i am sure, this is not affecting the functionality, but the pipe clock
is enabled after all the clocks.
so it makes sense to disable it in the first place. you can just move
this above slave_clk.
Sure.. will fix it.
[snip]
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
