Hi Bjorn,
On 9 November 2016 at 20:06, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
> On Wed, Nov 09, 2016 at 02:25:56PM -0500, Christopher Covington wrote:
>> Hi Bjorn,
>>
[...]
>>
>> We're working to add the PNP0C02 resource to future firmware, but it's
>> not in the current firmware. Are dmesg and /proc/iomem from the
>> current firmware interesting or should we wait for the update to file?
>
> Note that the ECAM space is not the only thing that should be
> described via these PNP0C02 devices. *All* non-enumerable resources
> should be described by the _CRS method of some ACPI device. Here's a
> sample from my laptop:
>
> PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
> system 00:01: [io 0x1800-0x189f] could not be reserved
> system 00:01: [io 0x0800-0x087f] has been reserved
> system 00:01: [io 0x0880-0x08ff] has been reserved
> system 00:01: [io 0x0900-0x097f] has been reserved
> system 00:01: [io 0x0980-0x09ff] has been reserved
> system 00:01: [io 0x0a00-0x0a7f] has been reserved
> system 00:01: [io 0x0a80-0x0aff] has been reserved
> system 00:01: [io 0x0b00-0x0b7f] has been reserved
> system 00:01: [io 0x0b80-0x0bff] has been reserved
> system 00:01: [io 0x15e0-0x15ef] has been reserved
> system 00:01: [io 0x1600-0x167f] has been reserved
> system 00:01: [io 0x1640-0x165f] has been reserved
> system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
> system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
> system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
> system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
> system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
> system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
> system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
> system 00:01: [mem 0xf7fe0000-0xf7ffffff] has been reserved
> system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>
> Do you have firmware in the field that may not get updated? If so,
> I'd like to see the whole solution for that firmware, including the
> MCFG quirk (which tells the PCI core where the ECAM region is) and
> whatever PNP0C02 quirk you figure out to actually reserve the region.
>
> I proposed a PNP0C02 quirk to Duc along these lines of the below. I
> don't actually know if it's feasible, but it didn't look as bad as I
> expected, so I'd kind of like somebody to try it out. I think you
> would have to call this via a DMI hook (do you have DMI on arm64?),
> maybe from pnp_init() or similar.
>
We do have SMBIOS/DMI on arm64, but we have been successful so far not
to rely on it for quirks, and we'd very much like to keep it that way.
Since this ACPI _CRS method has nothing to do with SMBIOS/DMI, surely
there is a better way to wire up the reservation code to the
information exposed by ACPI?
--
Ard.
> struct pnp_protocol pnpquirk_protocol = {
> .name = "Plug and Play Quirks",
> };
>
> void quirk()
> {
> struct pnp_dev *dev;
> struct resource res;
>
> ret = pnp_register_protocol(&pnpquirk_protocol);
> if (ret)
> return;
>
> dev = pnp_alloc_dev(&pnpquirk_protocol, 0, "PNP0C02");
> if (!dev)
> return;
>
> res.start = XX; /* ECAM start */
> res.end = YY; /* ECAM end */
> res.flags = IORESOURCE_MEM;
> pnp_add_resource(dev, &res);
>
> dev->active = 1;
> pnp_add_device(dev);
>
> dev_info(&dev->dev, "fabricated device to reserve ECAM space %pR\n", &res);
> }
>
> Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
