On Fri, Oct 21, 2016 at 09:45:36AM +0800, Ruqiang Ju wrote:
> Add PCIe controller drvier for HiSilicon STB SoCs,
> the controller is based on the DesignWare's PCIe core.
>
> Signed-off-by: Ruqiang Ju <juruqiang@xxxxxxxxxx>
> ---
> .../bindings/pci/hisilicon-histb-pcie.txt | 66 +++
> drivers/pci/host/Kconfig | 8 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-histb.c | 448 +++++++++++++++++++++
> 4 files changed, 523 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> create mode 100644 drivers/pci/host/pcie-histb.c
>
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> new file mode 100644
> index 0000000..952f1db
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> @@ -0,0 +1,66 @@
> +HiSilicon STB PCIe host bridge DT description
> +
> +HiSilicon PCIe host controller is based on Designware PCI core.
> +It shares common functions with PCIe Designware core driver and inherits
> +common properties defined in
> +Documentation/devicetree/bindings/pci/designware-pci.txt.
> +
> +Additional properties are described here:
> +
> +Required properties
> +- compatible: Should be one of the following strings
> + "hisilicon,histb-pcie",
This should either be a fallback compatible or be dropped.
> + "hisilicon,hi3798cv200-pcie"
> +- reg: Should contain sysctl, rc_dbi, config registers location and length.
> +- reg-names: Must include the following entries:
> + "sysctrl": system control registers of PCIe controller;
> + "rc_dbi": configuration space of PCIe controller;
> + "config": configuration transaction space of PCIe controller.
> +- interrupts: MSI interrupt.
> +- interrupt-names: Must include "msi" entries.
> +- clocks: List of phandle and clock specifier pairs as listed
> + in clock-names property.
> +- clock-name: Must include the following entries:
> + "aux_clk": auxiliary gate clock;
> + "pipe_clk": pipe gate clock;
> + "sys_clk": sys gate clock;
> + "bus_clk": bus gate clock.
> +- resets: List of phandle and reset specifier pairs as listed
> + in reset-names property
> +- reset-names: Must include the following entries:
> + "soft_reset": soft reset;
> + "sys_reset": sys reset;
> + "bus_rest": bus reset.
> +
> +Optional properties:
> +- power-gpios: pcie device power control gpio if needed;
> +- power-gpios-active-high: must include this propty
> + if active level is high.
This should be dropped. The power-gpios property should indicate the
active state.
> +- status: Either "ok" or "disabled".
No need to explicitly document this.
> +
> +Example:
> + pcie@f9860000 {
> + compatible = "hisilicon,histb-pcie", "snps,dw-pcie";
> + reg = <0xf9860000 0x1000>,
> + <0xf0000000 0x2000>,
> + <0xf2000000 0x01000000>;
> + reg-names = "sysctrl", "rc_dbi", "config";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + num-lanes = <1>;
> + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
> + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0x0 0 0 1 &gic 0 131 4>;
> + clocks = <&crg PCIE_AUX_CLK>,
> + <&crg PCIE_PIPE_CLK>,
> + <&crg PCIE_SYS_CLK>,
> + <&crg PCIE_BUS_CLK>;
> + clock-names = "aux_clk", "pipe_clk", "sys_clk", "bus_clk";
> + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
> + reset-names = "soft_reset", "sys_reset", "bus_reset";
> + };
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
