On Fri, Sep 30, 2016 at 09:47:49AM +1000, Gavin Shan wrote:
>In current implementation, pcibios_sriov_enable() is used by PPC
>PowerNV platform only. In PowerNV specific pcibios_sriov_enable(),
>PF's IOV BARs might be updated (shifted) by pci_update_resource().
>It means the IOV BARs aren't ready for decoding incoming memory
>address until pcibios_sriov_enable() returns.
>
>This calls pcibios_sriov_enable() earlier before the IOV BARs are
>enabled. As the result, the IOV BARs have been configured correctly
>when they are enabled.
>
>Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
>Tested-by: Carol Soto <clsoto@xxxxxxxxxx>
Bjorn, is there any chance to put those two patches to 4.9? :)
Thanks,
Gavin
>---
> drivers/pci/iov.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
>diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>index 2194b44..f1343f0 100644
>--- a/drivers/pci/iov.c
>+++ b/drivers/pci/iov.c
>@@ -303,13 +303,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> return rc;
> }
>
>- pci_iov_set_numvfs(dev, nr_virtfn);
>- iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
>- pci_cfg_access_lock(dev);
>- pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>- msleep(100);
>- pci_cfg_access_unlock(dev);
>-
> iov->initial_VFs = initial;
> if (nr_virtfn < initial)
> initial = nr_virtfn;
>@@ -320,6 +313,13 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> goto err_pcibios;
> }
>
>+ pci_iov_set_numvfs(dev, nr_virtfn);
>+ iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
>+ pci_cfg_access_lock(dev);
>+ pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>+ msleep(100);
>+ pci_cfg_access_unlock(dev);
>+
> for (i = 0; i < initial; i++) {
> rc = pci_iov_add_virtfn(dev, i, 0);
> if (rc)
>--
>2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
