Use the DesignWare-generic register accessors instead of doing readl() and writel() directly. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- drivers/pci/host/pcie-artpec6.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/host/pcie-artpec6.c b/drivers/pci/host/pcie-artpec6.c index 8840e30..c3dd571 100644 --- a/drivers/pci/host/pcie-artpec6.c +++ b/drivers/pci/host/pcie-artpec6.c @@ -139,7 +139,7 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6) * Enable writing to config regs. This is required as the Synopsys * driver changes the class code. That register needs DBI write enable. */ - writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF); + dw_pcie_writel_rc(pp, MISC_CONTROL_1_OFF, DBI_RO_WR_EN); pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR; pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR; @@ -159,8 +159,8 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6) return 0; dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", - readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), - readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); + dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0), + dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1)); return -ETIMEDOUT; } -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
