On Friday 30 September 2016, Sinan Kaya wrote: > On 9/29/2016 2:00 PM, Ondrej Zary wrote: > >> The previous two patches were in the right direction. > >> > >> > Can we also get the same output from 4.6 kernel with the attached > >> > patch for the same machine you sent these? > > > > Here it is. > > > >> > Something about SCI still doesn't feel right. > >> > > >> > The IRQ assignment fails if the penalty is greater than > >> > PIRQ_PENALTY_ISA_ALWAYS. This will happen if BIOS tells us to use an > >> > IRQ and same IRQ is in use by the SCI. > > Thanks, I reverted penalize_sci function and dropped patch #1. Can you try > this again? It seems to work, at least on one machine. -- Ondrej Zary
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #130 SMP Fri Sep 30 08:33:00 CEST 2016 [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000077fbfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000077fc000-0x00000000077fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000077ff000-0x00000000077fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: System Manufacturer System Name/A7VL133, BIOS ASUS A7VL133-VM ACPI BIOS Revision 1008 06/10/2002 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x77fc max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FFC000000 write-back [ 0.000000] 1 base 004000000 mask FFE000000 write-back [ 0.000000] 2 base 006000000 mask FFF000000 write-back [ 0.000000] 3 base 007000000 mask FFF800000 write-back [ 0.000000] 4 base 0F0000000 mask FF8000000 write-combining [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x016b6000, 0x016b6fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6DA0 000014 (v00 ASUS ) [ 0.000000] ACPI: RSDT 0x00000000077FC000 00002C (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP 0x00000000077FC080 000074 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT 0x00000000077FC100 0027F0 (v01 ASUS A7VL133 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS 0x00000000077FF000 000040 [ 0.000000] ACPI: BOOT 0x00000000077FC040 000028 (v01 ASUS A7VL133 30303031 MSFT 31313031) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 119MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 077fc000 [ 0.000000] low ram: 0 - 077fc000 [ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000077fbfff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000077fbfff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000077fbfff] [ 0.000000] On node 0 totalpages: 30618 [ 0.000000] free_area_init_node: node 0, pgdat c15b13e0, node_mem_map c770c020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 208 pages used for memmap [ 0.000000] Normal zone: 26620 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x07800000-0xfffeffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 19 pages/cpu @c76f6000 s47980 r0 d29844 u77824 [ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 30378 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro quiet [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 114356K/122472K available (3918K kernel code, 435K rwdata, 1520K rodata, 524K init, 412K bss, 8116K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xc7ffc000 - 0xff7fe000 ( 888 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc77fc000 ( 119 MB) [ 0.000000] .init : 0xc15c0000 - 0xc1643000 ( 524 kB) [ 0.000000] .data : 0xc13d3d65 - 0xc15bee20 (1964 kB) [ 0.000000] .text : 0xc1000000 - 0xc13d3d65 (3919 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:32 16 [ 0.000000] CPU 0 irqstacks, hard=c701c000 soft=c701e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 857.640 MHz processor [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1715.28 BogoMIPS (lpj=3430560) [ 0.004021] pid_max: default: 32768 minimum: 301 [ 0.004069] ACPI: Core revision 20160422 [ 0.010203] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.010216] [ 0.010226] ACPI: setting ELCR to 0200 (from 0e20) [ 0.010325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.010331] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.011602] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.011613] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.017690] Freeing SMP alternatives memory: 16K (c1643000 - c1647000) [ 0.018287] smpboot: Max logical packages: 1 [ 0.018297] smpboot: weird, boot CPU (#0) not listed by the BIOS [ 0.018300] smpboot: SMP motherboard not detected [ 0.018302] smpboot: SMP disabled [ 0.018308] smpboot: Local APIC not detected. Using dummy APIC emulation. [ 0.018316] Performance Events: [ 0.018326] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.018328] no hardware sampling interrupt available. [ 0.018336] AMD PMU driver. [ 0.018345] ... version: 0 [ 0.018347] ... bit width: 48 [ 0.018350] ... generic registers: 4 [ 0.018353] ... value mask: 0000ffffffffffff [ 0.018356] ... max period: 00007fffffffffff [ 0.018359] ... fixed-purpose events: 0 [ 0.018361] ... event mask: 000000000000000f [ 0.019714] x86: Booted up 1 node, 1 CPUs [ 0.019726] smpboot: Total of 1 processors activated (1715.28 BogoMIPS) [ 0.020320] devtmpfs: initialized [ 0.021359] PM: Registering ACPI NVS region [mem 0x077ff000-0x077fffff] (4096 bytes) [ 0.021646] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.022152] NET: Registered protocol family 16 [ 0.022852] cpuidle: using governor ladder [ 0.022861] cpuidle: using governor menu [ 0.022971] Simple Boot Flag at 0x3a set to 0x1 [ 0.022994] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.023018] ACPI: bus type PCI registered [ 0.029993] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1 [ 0.029997] PCI: Using configuration type 1 for base access [ 0.036278] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.036999] ACPI: Added _OSI(Module Device) [ 0.037006] ACPI: Added _OSI(Processor Device) [ 0.037009] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.037013] ACPI: Added _OSI(Processor Aggregator Device) [ 0.041192] ACPI: Interpreter enabled [ 0.041277] ACPI: (supports S0 S1 S4 S5) [ 0.041283] ACPI: Using PIC for interrupt routing [ 0.041393] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.054618] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.054832] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.055024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.055214] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.055423] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.055443] acpi PNP0A03:00: _OSC: OS supports [Segments MSI] [ 0.055465] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.055481] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.055634] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.055641] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.055647] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.055656] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.055662] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored) [ 0.055668] acpi PNP0A03:00: host bridge window [mem 0x07800000-0xffffffff window] (ignored) [ 0.055672] PCI: root bus 00: using default resources [ 0.055915] PCI host bridge to bus 0000:00 [ 0.055924] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.055930] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.056048] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.056094] pci 0000:00:00.0: [1106:0305] type 00 class 0x060000 [ 0.056120] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] [ 0.056494] pci 0000:00:01.0: [1106:8305] type 01 class 0x060400 [ 0.056557] pci 0000:00:01.0: supports D1 [ 0.056653] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.056869] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100 [ 0.057212] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a [ 0.057262] pci 0000:00:07.1: reg 0x20: [io 0xd800-0xd80f] [ 0.057286] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.057291] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.057297] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.057302] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.057563] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300 [ 0.057610] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f] [ 0.057744] pci 0000:00:07.2: System wakeup disabled by ACPI [ 0.057940] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300 [ 0.057987] pci 0000:00:07.3: reg 0x20: [io 0xd000-0xd01f] [ 0.058122] pci 0000:00:07.3: System wakeup disabled by ACPI [ 0.058332] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000 [ 0.058406] pci 0000:00:07.4: quirk: [io 0xe200-0xe27f] claimed by vt82c686 HW-mon [ 0.058414] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB [ 0.058670] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100 [ 0.058692] pci 0000:00:07.5: reg 0x10: [io 0xb800-0xb8ff] [ 0.058705] pci 0000:00:07.5: reg 0x14: [io 0xb400-0xb403] [ 0.058718] pci 0000:00:07.5: reg 0x18: [io 0xb000-0xb003] [ 0.059041] pci 0000:00:0e.0: [10ec:8139] type 00 class 0x020000 [ 0.059061] pci 0000:00:0e.0: reg 0x10: [io 0xa400-0xa4ff] [ 0.059075] pci 0000:00:0e.0: reg 0x14: [mem 0xee800000-0xee8000ff] [ 0.059116] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00007fff pref] [ 0.059155] pci 0000:00:0e.0: supports D1 D2 [ 0.059161] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold [ 0.059542] pci 0000:01:00.0: [5333:8a26] type 00 class 0x030000 [ 0.059564] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef07ffff] [ 0.059577] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref] [ 0.059615] pci 0000:01:00.0: reg 0x30: [mem 0xefff0000-0xefffffff pref] [ 0.059663] pci 0000:01:00.0: supports D1 D2 [ 0.059843] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.059855] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.059863] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.059877] pci_bus 0000:00: on NUMA node 0 [ 0.062893] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.062903] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.062905] vgaarb: loaded [ 0.062909] vgaarb: bridge control possible 0000:01:00.0 [ 0.063197] SCSI subsystem initialized [ 0.063418] libata version 3.00 loaded. [ 0.063448] ACPI: bus type USB registered [ 0.063580] usbcore: registered new interface driver usbfs [ 0.063633] usbcore: registered new interface driver hub [ 0.063693] usbcore: registered new device driver usb [ 0.063836] PCI: Using ACPI for IRQ routing [ 0.063846] PCI: pci_cache_line_size set to 32 bytes [ 0.063902] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.063909] e820: reserve RAM buffer [mem 0x077fc000-0x07ffffff] [ 0.065488] clocksource: Switched to clocksource pit [ 0.089009] pnp: PnP ACPI init [ 0.089649] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.089661] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.089669] system 00:00: [mem 0x00100000-0x077fffff] could not be reserved [ 0.089676] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved [ 0.089683] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.089700] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.090224] system 00:01: [io 0x03f0-0x03f1] has been reserved [ 0.090233] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.090245] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.090442] system 00:02: [io 0xe400-0xe47f] has been reserved [ 0.090451] system 00:02: [io 0xe800-0xe80f] has been reserved [ 0.090458] system 00:02: [io 0xe200-0xe27f] has been reserved [ 0.090468] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.090982] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.091357] pnp 00:04: [dma 2] [ 0.091503] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.092283] pnp 00:05: [dma 3] [ 0.092474] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.093177] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.093933] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.094336] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.094743] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.095003] pnp: PnP ACPI: found 10 devices [ 0.095017] PnPBIOS: Disabled [ 0.137906] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.137981] clocksource: Switched to clocksource acpi_pm [ 0.138063] pci 0000:00:0e.0: BAR 6: assigned [mem 0x08000000-0x08007fff pref] [ 0.138080] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.138093] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff] [ 0.138101] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref] [ 0.138115] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.138122] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.138129] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefdfffff] [ 0.138135] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref] [ 0.138271] NET: Registered protocol family 2 [ 0.139097] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.139130] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.139179] TCP: Hash tables configured (established 1024 bind 1024) [ 0.139331] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.139367] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.139620] NET: Registered protocol family 1 [ 0.139698] pci 0000:00:00.0: Applying VIA southbridge workaround [ 0.139711] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.139725] pci 0000:00:07.0: Disabling VIA external APIC routing [ 0.140839] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 [ 0.140847] PCI: setting IRQ 9 as level-triggered [ 0.141520] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.141528] PCI: CLS 32 bytes, default 32 [ 0.143467] futex hash table entries: 256 (order: 1, 8192 bytes) [ 0.145182] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.159115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.159128] io scheduler noop registered [ 0.159131] io scheduler deadline registered [ 0.159281] io scheduler cfq registered (default) [ 0.160585] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.160603] ACPI: Power Button [PWRB] [ 0.160884] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.160890] ACPI: Power Button [PWRF] [ 0.161043] tsc: Marking TSC unstable due to TSC halts in idle [ 0.161218] Warning: Processor Platform Limit event detected, but not handled. [ 0.161221] Consider compiling CPUfreq support into your kernel. [ 0.162012] isapnp: Scanning for PnP cards... [ 0.516643] isapnp: No Plug & Play device found [ 0.516957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.537774] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.558633] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.560296] Non-volatile memory driver v1.3 [ 0.560305] Linux agpgart interface v0.103 [ 0.560441] [drm] Initialized drm 1.1.0 20060810 [ 0.571028] loop: module loaded [ 0.571428] pata_via 0000:00:07.1: version 0.3.4 [ 0.574468] scsi host0: pata_via [ 0.574940] scsi host1: pata_via [ 0.575170] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14 [ 0.575177] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15 [ 0.575388] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 0.575398] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 0.575478] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 0.576583] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.576591] PCI: setting IRQ 10 as level-triggered [ 0.577575] 8139too 0000:00:0e.0 eth0: RealTek RTL8139 at 0x0001a400, 00:40:95:08:18:34, IRQ 10 [ 0.577669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.577673] ehci-pci: EHCI PCI platform driver [ 0.577746] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.577785] ohci-pci: OHCI PCI platform driver [ 0.577833] uhci_hcd: USB Universal Host Controller Interface driver [ 0.578259] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 0.578315] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 0.578390] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000d400 [ 0.579859] hub 1-0:1.0: USB hub found [ 0.579897] hub 1-0:1.0: 2 ports detected [ 0.580994] uhci_hcd 0000:00:07.3: UHCI Host Controller [ 0.581031] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 [ 0.581099] uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d000 [ 0.582101] hub 2-0:1.0: USB hub found [ 0.582136] hub 2-0:1.0: 2 ports detected [ 0.582832] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.583481] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.583516] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.584454] mousedev: PS/2 mouse device common for all mice [ 0.585365] rtc_cmos 00:03: RTC can wake from S4 [ 0.585859] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.585918] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram [ 0.586718] NET: Registered protocol family 17 [ 0.586869] Using IPI No-Shortcut mode [ 0.587607] registered taskstats version 1 [ 0.588721] console [netcon0] enabled [ 0.588725] netconsole: network logging started [ 0.588806] rtc_cmos 00:03: setting system clock to 2016-09-30 06:38:37 UTC (1475217517) [ 0.588951] PM: Hibernation image not present or could not be loaded. [ 0.617127] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.738822] ata1.00: ATA-4: ST33210A, 3.02, max UDMA/33 [ 0.738834] ata1.00: 6346368 sectors, multi 16: LBA [ 0.743753] ata1.00: configured for UDMA/33 [ 0.744506] scsi 0:0:0:0: Direct-Access ATA ST33210A 3.02 PQ: 0 ANSI: 5 [ 0.745423] sd 0:0:0:0: [sda] 6346368 512-byte logical blocks: (3.25 GB/3.03 GiB) [ 0.745624] sd 0:0:0:0: [sda] Write Protect is off [ 0.745633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.745718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.773501] sda: sda1 sda2 < sda5 > [ 0.775131] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.072931] random: fast init done [ 1.152066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc5cc4d10eb, max_idle_ns: 440795203494 ns [ 2.211004] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4 [ 2.234872] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 2.261225] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.261299] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.264363] Freeing unused kernel memory: 524K (c15c0000 - c1643000) [ 2.264730] Write protecting the kernel text: 3920k [ 2.264823] Write protecting the kernel read-only data: 1528k [ 4.398241] udevd (114): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead. [ 5.643782] random: crng init done [ 6.508948] Adding 112416k swap on /dev/sda5. Priority:-1 extents:1 across:112416k [ 6.529101] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.000945] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.901745] 8139too 0000:00:0e.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
