Hi, On Friday 23 September 2016 08:11 PM, Rob Herring wrote: > On Wed, Sep 14, 2016 at 10:42:03AM +0530, Kishon Vijay Abraham I wrote: >> Add endpoint mode support to designware driver. This uses the >> EP Core layer introduced recently to add endpoint mode support. >> *Any* function driver can now use this designware device >> to achieve the EP functionality. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >> --- >> .../devicetree/bindings/pci/designware-pcie.txt | 26 ++- >> drivers/pci/controller/Kconfig | 5 + >> drivers/pci/controller/Makefile | 1 + >> drivers/pci/controller/pcie-designware-ep.c | 228 ++++++++++++++++++++ >> drivers/pci/controller/pcie-designware.c | 30 +++ >> drivers/pci/controller/pcie-designware.h | 45 ++++ >> 6 files changed, 324 insertions(+), 11 deletions(-) >> create mode 100644 drivers/pci/controller/pcie-designware-ep.c >> >> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt >> index 6c5322c..bb0b789 100644 >> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt >> @@ -6,23 +6,27 @@ Required properties: >> - reg-names: Must be "config" for the PCIe configuration space. >> (The old way of getting the configuration address space from "ranges" >> is deprecated and should be avoided.) >> -- #address-cells: set to <3> >> -- #size-cells: set to <2> >> -- device_type: set to "pci" >> -- ranges: ranges for the PCI memory and I/O regions >> -- #interrupt-cells: set to <1> >> -- interrupt-map-mask and interrupt-map: standard PCI properties >> - to define the mapping of the PCIe interface to interrupt >> +- #address-cells (only for host mode): set to <3> >> +- #size-cells (only for host mode): set to <2> >> +- device_type (only for host mode): set to "pci" >> +- ranges (only for host mode): ranges for the PCI memory and I/O regions >> +- num-ib-windows (only for EP mode): number of inbound address translation >> + windows >> +- num-ob-windows (only for EP mode): number of outbound address translation >> + windows >> +- #interrupt-cells (only for host mode): set to <1> >> +- interrupt-map-mask and interrupt-map (only for host mode): standard PCI >> + properties to define the mapping of the PCIe interface to interrupt > > It may be clearer to just document EP mode in a separate section even if > there's some duplication of properties. Other standard PCI binding > properties probably also don't apply. right, will change this accordingly. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
