Re: [PATCH V6 4/5] PCI: thunder: Enable ACPI PCI controller for ThunderX pass2.x silicon version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19.09.2016 17:45, Bjorn Helgaas wrote:
On Fri, Sep 09, 2016 at 09:24:06PM +0200, Tomasz Nowicki wrote:
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see pci_thunder_pem_ops) and custom configuration space granulation
(see bus_shift = 24). In order to access configuration space and
probe PEM as ACPI based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. Export PEM pci_thunder_pem_ops structure so it is visible to MCFG quirk
   code.
2. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned pci_thunder_pem_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

Is it really the case that silicon pass2.x has MCFG revision 1, and
silicon pass1.x has MCFG revision 2?  That just seems backwards.

It is weird but silicon pass2.x is more common and it had MCFG revision 1 from the beginning. Unless it is allowed to use MCFG revision 0 ? Then we could use MCFG revision 0 for pass1.x

Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux