Re: [PATCH v5 09/14] drivers: iommu: arm-smmu-v3: add IORT configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/09/16 15:23, Lorenzo Pieralisi wrote:
> In ACPI bases systems, in order to be able to create platform
> devices and initialize them for ARM SMMU v3 components, the IORT
> kernel implementation requires a set of static functions to be
> used by the IORT kernel layer to configure platform devices for
> ARM SMMU v3 components.
> 
> Add static configuration functions to the IORT kernel layer for
> the ARM SMMU v3 components, so that the ARM SMMU v3 driver can
> initialize its respective platform device by relying on the IORT
> kernel infrastructure and by adding a corresponding ACPI device
> early probe section entry.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Cc: Will Deacon <will.deacon@xxxxxxx>
> Cc: Robin Murphy <robin.murphy@xxxxxxx>
> Cc: Joerg Roedel <joro@xxxxxxxxxx>
> ---
>  drivers/acpi/arm64/iort.c   | 103 +++++++++++++++++++++++++++++++++++++++++++-
>  drivers/iommu/arm-smmu-v3.c |  95 +++++++++++++++++++++++++++++++++++++++-
>  2 files changed, 195 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index e0a9b16..a2ad102 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -425,6 +425,95 @@ struct irq_domain *iort_get_device_domain(struct device *dev, u32 req_id)
>  	return irq_find_matching_fwnode(handle, DOMAIN_BUS_PCI_MSI);
>  }
>  
> +static void __init acpi_iort_register_irq(int hwirq, const char *name,
> +					  int trigger,
> +					  struct resource *res)
> +{
> +	int irq = acpi_register_gsi(NULL, hwirq, trigger,
> +				    ACPI_ACTIVE_HIGH);
> +
> +	if (irq < 0) {

irq <= 0 ?

> +		pr_err("could not register gsi hwirq %d name [%s]\n", hwirq,
> +								      name);
> +		return;
> +	}
> +
> +	res->start = irq;
> +	res->end = irq;
> +	res->flags = IORESOURCE_IRQ;
> +	res->name = name;
> +}
> +
> +static int __init arm_smmu_v3_count_resources(struct acpi_iort_node *node)
> +{
> +	struct acpi_iort_smmu_v3 *smmu;
> +	/* Always present mem resource */
> +	int num_res = 1;
> +
> +	/* Retrieve SMMUv3 specific data */
> +	smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> +
> +	if (smmu->event_gsiv)
> +		num_res++;
> +
> +	if (smmu->pri_gsiv)
> +		num_res++;
> +
> +	if (smmu->gerr_gsiv)
> +		num_res++;
> +
> +	if (smmu->sync_gsiv)
> +		num_res++;
> +
> +	return num_res;
> +}
> +
> +static void __init arm_smmu_v3_init_resources(struct resource *res,
> +					      struct acpi_iort_node *node)
> +{
> +	struct acpi_iort_smmu_v3 *smmu;
> +	int num_res = 0;
> +
> +	/* Retrieve SMMUv3 specific data */
> +	smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> +
> +	res[num_res].start = smmu->base_address;
> +	res[num_res].end = smmu->base_address + SZ_128K - 1;
> +	res[num_res].flags = IORESOURCE_MEM;
> +
> +	num_res++;
> +
> +	if (smmu->event_gsiv)
> +		acpi_iort_register_irq(smmu->event_gsiv, "eventq",
> +				       ACPI_EDGE_SENSITIVE,
> +				       &res[num_res++]);
> +
> +	if (smmu->pri_gsiv)
> +		acpi_iort_register_irq(smmu->pri_gsiv, "priq",
> +				       ACPI_EDGE_SENSITIVE,
> +				       &res[num_res++]);
> +
> +	if (smmu->gerr_gsiv)
> +		acpi_iort_register_irq(smmu->gerr_gsiv, "gerror",
> +				       ACPI_EDGE_SENSITIVE,
> +				       &res[num_res++]);
> +
> +	if (smmu->sync_gsiv)
> +		acpi_iort_register_irq(smmu->sync_gsiv, "cmdq-sync",
> +				       ACPI_EDGE_SENSITIVE,
> +				       &res[num_res++]);
> +}
> +
> +static bool __init arm_smmu_v3_is_coherent(struct acpi_iort_node *node)
> +{
> +	struct acpi_iort_smmu_v3 *smmu;
> +
> +	/* Retrieve SMMUv3 specific data */
> +	smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> +
> +	return smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE;
> +}
> +
>  struct iort_iommu_config {
>  	const char *name;
>  	int (*iommu_init)(struct acpi_iort_node *node);
> @@ -434,10 +523,22 @@ struct iort_iommu_config {
>  				     struct acpi_iort_node *node);
>  };
>  
> +static const struct iort_iommu_config iort_arm_smmu_v3_cfg __initconst = {
> +	.name = "arm-smmu-v3",
> +	.iommu_is_coherent = arm_smmu_v3_is_coherent,
> +	.iommu_count_resources = arm_smmu_v3_count_resources,
> +	.iommu_init_resources = arm_smmu_v3_init_resources
> +};
> +
>  static __init
>  const struct iort_iommu_config *iort_get_iommu_cfg(struct acpi_iort_node *node)
>  {
> -	return NULL;
> +	switch (node->type) {
> +	case ACPI_IORT_NODE_SMMU_V3:
> +		return &iort_arm_smmu_v3_cfg;
> +	default:
> +		return NULL;
> +	}
>  }
>  
>  /**
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index dbc21e3..9463f3f 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -20,6 +20,8 @@
>   * This driver is powered by bad coffee and bombay mix.
>   */
>  
> +#include <linux/acpi.h>
> +#include <linux/acpi_iort.h>
>  #include <linux/delay.h>
>  #include <linux/dma-iommu.h>
>  #include <linux/err.h>
> @@ -2539,6 +2541,32 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> +				      struct arm_smmu_device *smmu)
> +{
> +	struct acpi_iort_smmu_v3 *iort_smmu;
> +	struct device *dev = smmu->dev;
> +	struct acpi_iort_node *node;
> +
> +	node = *(struct acpi_iort_node **)dev_get_platdata(dev);
> +
> +	/* Retrieve SMMUv3 specific data */
> +	iort_smmu = (struct acpi_iort_smmu_v3 *)node->node_data;
> +
> +	if (iort_smmu->flags & ACPI_IORT_SMMU_V3_COHACC_OVERRIDE)
> +		smmu->features |= ARM_SMMU_FEAT_COHERENCY;
> +
> +	return 0;
> +}
> +#else
> +static int arm_smmu_device_acpi_probe(struct platform_device *pdev,
> +				      struct arm_smmu_device *smmu)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
>  static int arm_smmu_device_dt_probe(struct platform_device *pdev,
>  				    struct arm_smmu_device *smmu)
>  {
> @@ -2556,6 +2584,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	struct arm_smmu_device *smmu;
>  	struct device *dev = &pdev->dev;
> +	struct fwnode_handle *fwnode;
>  
>  	smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
>  	if (!smmu) {
> @@ -2592,7 +2621,10 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>  	if (irq > 0)
>  		smmu->gerr_irq = irq;
>  
> -	ret = arm_smmu_device_dt_probe(pdev, smmu);
> +	if (dev->of_node)
> +		ret = arm_smmu_device_dt_probe(pdev, smmu);
> +	else
> +		ret = arm_smmu_device_acpi_probe(pdev, smmu);
>  
>  	if (ret)
>  		return ret;
> @@ -2615,8 +2647,12 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	/* FIXME: DT code path does not set up dev->fwnode pointer */
> +	fwnode = dev->of_node ? &dev->of_node->fwnode : dev->fwnode;
> +

You're right, this is getting annoying. For a sample of n=1, I've just
booted a Juno with the below and nothing blew up - I'll do a bit more
homework and probably spin it into a proper patch:
---8<---
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index f39ccd5aa701..f811d2796437 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -142,6 +142,7 @@ struct platform_device *of_device_alloc(struct
device_node *np,
 	}

 	dev->dev.of_node = of_node_get(np);
+	dev->dev.fwnode = &np->fwnode;
 	dev->dev.parent = parent ? : &platform_bus;

 	if (bus_id)
@@ -241,6 +242,7 @@ static struct amba_device
*of_amba_device_create(struct device_node *node,

 	/* setup generic device info */
 	dev->dev.of_node = of_node_get(node);
+	dev->dev.fwnode = &node->fwnode;
 	dev->dev.parent = parent ? : &platform_bus;
 	dev->dev.platform_data = platform_data;
 	if (bus_id)
--->8---

Robin.

>  	/* And we're up. Go go go! */
> -	fwspec_iommu_set_ops(&dev->of_node->fwnode, &arm_smmu_ops);
> +	fwspec_iommu_set_ops(fwnode, &arm_smmu_ops);
> +
>  #ifdef CONFIG_PCI
>  	pci_request_acs();
>  	ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
> @@ -2688,6 +2724,61 @@ static int __init arm_smmu_of_init(struct device_node *np)
>  }
>  IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
>  
> +#ifdef CONFIG_ACPI
> +static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
> +{
> +	struct acpi_iort_node *iort_node, *iort_end;
> +	struct acpi_table_iort *iort;
> +	struct fwnode_handle *fwnode;
> +	int i, ret;
> +
> +	/*
> +	 * table and iort will both point to the start of IORT table, but
> +	 * have different struct types
> +	 */
> +	iort = (struct acpi_table_iort *)table;
> +
> +	/* Get the first IORT node */
> +	iort_node = ACPI_ADD_PTR(struct acpi_iort_node, table,
> +				 iort->node_offset);
> +	iort_end = ACPI_ADD_PTR(struct acpi_iort_node, table,
> +				table->length);
> +
> +	for (i = 0; i < iort->node_count; i++) {
> +
> +		if (iort_node >= iort_end) {
> +			pr_err("iort node pointer overflows, bad table\n");
> +			return -EINVAL;
> +		}
> +
> +		if (iort_node->type == ACPI_IORT_NODE_SMMU_V3) {
> +			ret = arm_smmu_init();
> +			if (ret)
> +				return ret;
> +
> +			fwnode = iommu_alloc_fwnode();
> +
> +			if (!fwnode)
> +				return -ENOMEM;
> +
> +			ret = iort_set_fwnode(iort_node, fwnode);
> +			if (ret)
> +				goto free;
> +		}
> +
> +		iort_node = ACPI_ADD_PTR(struct acpi_iort_node, iort_node,
> +					 iort_node->length);
> +	}
> +
> +	return 0;
> +free:
> +	iommu_free_fwnode(fwnode);
> +	return ret;
> +
> +}
> +IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
> +#endif
> +
>  MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
>  MODULE_AUTHOR("Will Deacon <will.deacon@xxxxxxx>");
>  MODULE_LICENSE("GPL v2");
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux