Re: [PATCH V6 2/5] PCI/ACPI: Check platform specific ECAM quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 12, 2016 at 3:24 PM, Duc Dang <dhdang@xxxxxxx> wrote:
> On Fri, Sep 9, 2016 at 12:24 PM, Tomasz Nowicki <tn@xxxxxxxxxxxx> wrote:
>>
>> Some platforms may not be fully compliant with generic set of PCI config
>> accessors. For these cases we implement the way to overwrite CFG accessors
>> set and configuration space range.
>>
>> In first place pci_mcfg_parse() saves machine's IDs and revision number
>> (these come from MCFG header) in order to match against known quirk entries.
>> Then the algorithm traverses available quirk list (static array),
>> matches against <oem_id, oem_table_id, rev, domain, bus number range> and
>> returns custom PCI config ops and/or CFG resource structure.
>>
>> When adding new quirk there are two possibilities:
>> 1. Override default pci_generic_ecam_ops ops but CFG resource comes from MCFG
>> { "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &foo_ops, MCFG_RES_EMPTY },
>> 2. Override default pci_generic_ecam_ops ops and CFG resource. For this case
>> it is also allowed get CFG resource from quirk entry w/o having it in MCFG.
>> { "OEM_ID", "OEM_TABLE_ID", <REV>, <DOMAIN>, <BUS_NR>, &boo_ops,
>>   DEFINE_RES_MEM(START, SIZE) },
>>
>> pci_generic_ecam_ops and MCFG entries will be used for platforms
>> free from quirks.
>>
>> Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
>> Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
>> Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
>> ---
>>  drivers/acpi/pci_mcfg.c | 80 +++++++++++++++++++++++++++++++++++++++++++++----
>>  1 file changed, 74 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
>> index ffcc651..2b8acc7 100644
>> --- a/drivers/acpi/pci_mcfg.c
>> +++ b/drivers/acpi/pci_mcfg.c
>> @@ -32,6 +32,59 @@ struct mcfg_entry {
>>         u8                      bus_start;
>>         u8                      bus_end;
>>  };
>> +struct mcfg_fixup {
>> +       char oem_id[ACPI_OEM_ID_SIZE + 1];
>> +       char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
>> +       u32 oem_revision;
>> +       u16 seg;
>> +       struct resource bus_range;
>> +       struct pci_ecam_ops *ops;
>> +       struct resource cfgres;
>> +};
>> +
>> +#define MCFG_DOM_ANY                   (-1)
>> +#define MCFG_BUS_RANGE(start, end)     DEFINE_RES_NAMED((start),       \
>> +                                               ((end) - (start) + 1),  \
>> +                                               NULL, IORESOURCE_BUS)
>> +#define MCFG_BUS_ANY           MCFG_BUS_RANGE(0x0, 0xff)
>> +#define MCFG_RES_EMPTY         DEFINE_RES_NAMED(0, 0, NULL, 0)
>> +
>> +static struct mcfg_fixup mcfg_quirks[] = {
>> +/*     { OEM_ID, OEM_TABLE_ID, REV, DOMAIN, BUS_RANGE, cfgres, ops }, */
>> +};
>> +
>> +static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
>> +static char mcfg_oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
>> +static u32 mcfg_oem_revision;
>> +
>> +static void pci_mcfg_match_quirks(struct acpi_pci_root *root,
>> +                                 struct resource *cfgres,
>> +                                 struct pci_ecam_ops **ecam_ops)
>> +{
>> +       struct mcfg_fixup *f;
>> +       int i;
>> +
>> +       /*
>> +        * First match against PCI topology <domain:bus> then use OEM ID, OEM
>> +        * table ID, and OEM revision from MCFG table standard header.
>> +        */
>> +       for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
>> +               if (f->seg == root->segment &&
>
> Is dropping the comparison with MCFG_DOM_ANY intended? It is useful if
> all the controllers (segs) can use the same quirk (X-Gene case).
> If you decide to drop it, then we can remove MCFG_DOM_ANY definition as well.
>
>> +                   resource_contains(&f->bus_range, &root->secondary) &&
>> +                   !memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
>> +                   !memcmp(f->oem_table_id, mcfg_oem_table_id,
>> +                           ACPI_OEM_TABLE_ID_SIZE) &&
>> +                   f->oem_revision == mcfg_oem_revision) {
>> +                       if (f->cfgres.start)
>> +                               *cfgres = f->cfgres;
>> +                       if (f->ops)
>> +                               *ecam_ops =  f->ops;
>> +                       dev_info(&root->device->dev, "Applying PCI MCFG quirks for %s %s rev: %d\n",
>> +                                f->oem_id, f->oem_table_id, f->oem_revision);
>> +                       return;
>> +               }
>> +       }
>> +}
>>
>>  /* List to save MCFG entries */
>>  static LIST_HEAD(pci_mcfg_list);
>> @@ -61,14 +114,24 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
>>
>>         }
>>
>> -       if (!root->mcfg_addr)
>> -               return -ENXIO;
>> -
>>  skip_lookup:
>>         memset(&res, 0, sizeof(res));
>> -       res.start = root->mcfg_addr + (bus_res->start << 20);
>> -       res.end = res.start + (resource_size(bus_res) << 20) - 1;
>> -       res.flags = IORESOURCE_MEM;
>> +       if (root->mcfg_addr) {
>> +               res.start = root->mcfg_addr + (bus_res->start << 20);
>> +               res.end = res.start + (resource_size(bus_res) << 20) - 1;
>> +               res.flags = IORESOURCE_MEM;
>> +       }
>> +
>> +       /*
>> +        * Let to override default ECAM ops and CFG resource range.
>> +        * Also, this might even retrieve CFG resource range in case MCFG
>> +        * does not have it. Invalid CFG start address means MCFG firmware bug
>> +        * or we need another quirk in array.
>> +        */
>> +       pci_mcfg_match_quirks(root, &res, &ops);
>> +       if (!res.start)
>> +               return -ENXIO;
>> +
>>         *cfgres = res;
>>         *ecam_ops = ops;
>>         return 0;
>> @@ -101,6 +164,11 @@ static __init int pci_mcfg_parse(struct acpi_table_header *header)
>>                 list_add(&e->list, &pci_mcfg_list);
>>         }
>>
>> +       /* Save MCFG IDs and revision for quirks matching */
>> +       memcpy(mcfg_oem_id, header->oem_id, ACPI_OEM_ID_SIZE);
>> +       memcpy(mcfg_oem_table_id, header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
>> +       mcfg_oem_revision = header->revision;

I think this is a typo, it should be:
               mcfg_oem_revision = header->oem_revision;

>> +
>>         pr_info("MCFG table detected, %d entries\n", n);
>>         return 0;
>>  }
>> --
>> 1.9.1
> Regards,
> Duc Dang.
Regards,
Duc Dang.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux