Re: [RFC PATCH V5 2/5] PCI/ACPI: Move ACPI ECAM mapping to generic MCFG driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 08, 2016 at 03:05:38PM +0200, Tomasz Nowicki wrote:
> pci_acpi_setup_ecam_mapping() is not really ARM64 specific so move it out
> of arch/arm64/ directory. In preparation for adding MCFG quirk handling
> extend pci_acpi_setup_ecam_mapping() functionality to accept custom
> PCI config accessors (function's argument).
> 
> For ARM64 ACPI based PCI host controller we still use pci_generic_ecam_ops.

I'm not sure we gain much by moving pci_acpi_setup_ecam_mapping() from
arm64 code to generic code, since nobody else uses it yet.  But if you
do want to move it, can you do the move (with no other change at all)
in one patch, and add the new "ops" argument in a second patch?  I
just don't want the "ops" change to get lost in the noise of the move.

> Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
> ---
>  arch/arm64/kernel/pci.c  | 41 ++---------------------------------------
>  drivers/acpi/pci_mcfg.c  | 40 ++++++++++++++++++++++++++++++++++++++++
>  include/linux/pci-acpi.h |  3 +++
>  3 files changed, 45 insertions(+), 39 deletions(-)
> 
> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> index 981e828..2e7bed4 100644
> --- a/arch/arm64/kernel/pci.c
> +++ b/arch/arm64/kernel/pci.c
> @@ -114,44 +114,6 @@ int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
>  	return 0;
>  }
>  
> -/*
> - * Lookup the bus range for the domain in MCFG, and set up config space
> - * mapping.
> - */
> -static struct pci_config_window *
> -pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
> -{
> -	struct resource *bus_res = &root->secondary;
> -	u16 seg = root->segment;
> -	struct pci_config_window *cfg;
> -	struct resource cfgres;
> -	unsigned int bsz;
> -
> -	/* Use address from _CBA if present, otherwise lookup MCFG */
> -	if (!root->mcfg_addr)
> -		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
> -
> -	if (!root->mcfg_addr) {
> -		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
> -			seg, bus_res);
> -		return NULL;
> -	}
> -
> -	bsz = 1 << pci_generic_ecam_ops.bus_shift;
> -	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
> -	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
> -	cfgres.flags = IORESOURCE_MEM;
> -	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
> -			      &pci_generic_ecam_ops);
> -	if (IS_ERR(cfg)) {
> -		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
> -			seg, bus_res, PTR_ERR(cfg));
> -		return NULL;
> -	}
> -
> -	return cfg;
> -}
> -
>  /* release_info: free resources allocated by init_info */
>  static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
>  {
> @@ -177,7 +139,8 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
>  	if (!ri)
>  		return NULL;
>  
> -	ri->cfg = pci_acpi_setup_ecam_mapping(root);
> +	ri->cfg = pci_acpi_setup_ecam_mapping(root,
> +					      &pci_generic_ecam_ops.pci_ops);
>  	if (!ri->cfg) {
>  		kfree(ri);
>  		return NULL;
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index b5b376e..331b560 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -22,6 +22,7 @@
>  #include <linux/kernel.h>
>  #include <linux/pci.h>
>  #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
>  
>  /* Structure to hold entries from the MCFG table */
>  struct mcfg_entry {
> @@ -52,6 +53,45 @@ phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
>  	return 0;
>  }
>  
> +/*
> + * Lookup the bus range for the domain in MCFG, and set up config space
> + * mapping.
> + */
> +struct pci_config_window *
> +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root, struct pci_ops *ops)
> +{
> +	struct resource *bus_res = &root->secondary;
> +	u16 seg = root->segment;
> +	struct pci_config_window *cfg;
> +	struct resource cfgres;
> +	struct pci_ecam_ops ecam_ops = {
> +			.bus_shift = 20,
> +			.pci_ops = *ops,
> +	};
> +
> +	/* Use address from _CBA if present, otherwise lookup MCFG */
> +	if (!root->mcfg_addr)
> +		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
> +
> +	if (!root->mcfg_addr) {
> +		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
> +			seg, bus_res);
> +		return NULL;
> +	}
> +
> +	cfgres.start = root->mcfg_addr + (bus_res->start << 20);
> +	cfgres.end = cfgres.start + (resource_size(bus_res) << 20) - 1;
> +	cfgres.flags = IORESOURCE_MEM;
> +	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res, &ecam_ops);
> +	if (IS_ERR(cfg)) {
> +		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
> +			seg, bus_res, PTR_ERR(cfg));
> +		return NULL;
> +	}
> +
> +	return cfg;
> +}
> +
>  static __init int pci_mcfg_parse(struct acpi_table_header *header)
>  {
>  	struct acpi_table_mcfg *mcfg;
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 7d63a66..e9bfe00 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -26,6 +26,9 @@ extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>  
>  extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
>  
> +extern struct pci_config_window *
> +pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root, struct pci_ops *ops);
> +
>  static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
>  {
>  	struct pci_bus *pbus = pdev->bus;
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux