On Fri, Aug 19, 2016 at 04:24:38PM +0800, Ley Foon Tan wrote: > Altera PCIe IP can be configured as rootport or device and they might have > same vendor ID. It will cause the system hang issue if Altera PCIe is in > endpoint mode and work with other PCIe rootport that from other vendors. > So, add the rootport mode checking in link retrain fixup function. > > Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx> > --- > v2: change to check PCIe type is PCI_EXP_TYPE_ROOT_PORT > --- > drivers/pci/host/pcie-altera.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c > index 58eef99..33b6968 100644 > --- a/drivers/pci/host/pcie-altera.c > +++ b/drivers/pci/host/pcie-altera.c > @@ -139,6 +139,9 @@ static void altera_pcie_retrain(struct pci_dev *dev) > u16 linkcap, linkstat; > struct altera_pcie *pcie = dev->bus->sysdata; > > + if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) > + return; > + > if (!altera_pcie_link_is_up(pcie)) > return; Instead of making this a PCI fixup, can you make an altera_pcie_host_init() function, call it from altera_pcie_probe(), and do the link retrain there? Then you wouldn't need to worry about whether this is a Root Port or an Endpoint, plus it would make the altera driver structure more like the other drivers. You would call altera_pcie_host_init() before pci_scan_root_bus(), so you wouldn't have a pci_dev yet, so you wouldn't be able to use pcie_capability_set_word() to set the PCI_EXP_LNKCTL_RL bit. But I assume there's some device-dependent way to access it using cra_writel()? Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
