RE: Purpose of pci_remap_iospace

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 > On Wednesday, July 13, 2016 8:11:56 AM CEST Bharat Kumar Gogada wrote:
> > > Subject: Re: Purpose of pci_remap_iospace
> > >
> > > On Tuesday, July 12, 2016 6:57:10 AM CEST Bharat Kumar Gogada wrote:
> > > > Hi,
> > > >
> > > > I have a query.
> > > >
> > > > Can any once explain the purpose of pci_remap_iospace function in
> root
> > > port driver.
> > > >
> > > > What is its dependency with architecture ?
> > > >
> > > > Here is my understanding, the above API takes PCIe IO resource and its
> > > > to be mapped CPU address from ranges property and remaps into
> virtual
> > > address space.
> > > >
> > > > So my question is who uses this virtual addresses ?
> > >
> > > The inb()/outb() functions declared in asm/io.h
> > >
> > > > When End Point requests for IO BARs doesn't it get from the above
> > > > resource range (first parameter of API) and do ioremap to access this
> > > > region ?
> > >
> > > Device drivers generally do not ioremap() the I/O BARs but they use
> > > inb()/outb() directly. They can also call pci_iomap() and do
> > > ioread8()/iowrite8() on the pointer returned from that function, but
> > > generally the call to pci_iomap() then returns a pointer into the virtual
> > > address that is already mapped.
> > >
> > > > But why root complex driver is mapping this address region ?
> > >
> > > The PCI core does not know that the I/O space is memory mapped.
> > > On x86 and a few others, I/O space is not memory mapped but requires
> the
> > > use of special CPU instructions.
> > >
> > Thanks Arnd.
> >
> > I'm facing issue in testing IO bars on our SoC.
> >
> > I added following ranges in our device tree :
> > ranges = <0x01000000 0x00000000 0x00000000 0x00000000 0xe0000000 0
> 0x00100000   //io
> >              0x02000000 0x00000000 0xe0100000 0x00000000 0xe0100000 0
> 0x0ef00000>;   //non prefetchabe memory
> >
> > And I'm using above API to map the res and cpu physical address in my
> driver.
>
> I notice you have 1MB of I/O space here
>
> > Kernel Boot log:
> > [    2.345294] nwl-pcie fd0e0000.pcie: Link is UP
> > [    2.345339] PCI host bridge /amba/pcie@fd0e0000 ranges:
> > [    2.345356]   No bus range found for /amba/pcie@fd0e0000, using [bus
> 00-ff]
> > [    2.345382]    IO 0xe0000000..0xe00fffff -> 0x00000000
> > [    2.345401]   MEM 0xe0100000..0xeeffffff -> 0xe0100000
> > [    2.345498] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
> > [    2.345517] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [    2.345533] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
>
> and all of it gets mapped by the PCI core. Usually you only have 64K of I/O
> space per host bridge, and the PCI core should perhaps not try to map
> all of it, though I don't think this is actually your problem here.
>
> > [    2.345550] pci_bus 0000:00: root bus resource [mem 0xe0100000-
> 0xeeffffff]
> > [    2.345770] pci 0000:00:00.0: cannot attach to SMMU, is it on the same
> bus?
> > [    2.345786] iommu: Adding device 0000:00:00.0 to group 1
> > [    2.346142] pci 0000:01:00.0: cannot attach to SMMU, is it on the same
> bus?
> > [    2.346158] iommu: Adding device 0000:01:00.0 to group 1
> > [    2.346213] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0100000-
> 0xe02fffff]
> > [    2.346234] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0100000-0xe01fffff
> 64bit]
> > [    2.346268] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff
> 64bit]
> > [    2.346300] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0040]
> > [    2.346316] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0040]
> > [    2.346333] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
> > [    2.346350] pci 0000:00:00.0:   bridge window [mem 0xe0100000-
> 0xe02fffff]
> >
> > IO assignment fails.
>
> I would guess that the I/O space is not registered correctly. Is this
> drivers/pci/host/pcie-xilinx.c ? We have had problems with this in the
> past, since almost nobody uses I/O space and it requires several
> steps to all be done correctly.
>
Thanks Arnd.

we are testing using drivers/pci/host/pcie-xilinx-nwl.c.

Here is the code I added to driver in probe:
..
err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
        if (err) {
                pr_err("Getting bridge resources failed\n");
                return err;
        }
resource_list_for_each_entry(window, &res) {            //code for io resource
                struct resource *res = window->res;
                u64 restype = resource_type(res);

                switch (restype) {
                case IORESOURCE_IO:
                        err = pci_remap_iospace(res, iobase);
                        if(err)
                                pr_info("FAILED TO IPREMAP RESOURCE\n");
                        break;
                default:
                        dev_err(pcie->dev, "invalid resource %pR\n", res);

                }
        }

Other than above code I haven't done any change in driver.

Here is the printk added boot log:
[    2.308680] nwl-pcie fd0e0000.pcie: Link is UP
[    2.308724] PCI host bridge /amba/pcie@fd0e0000 ranges:
[    2.308741]   No bus range found for /amba/pcie@fd0e0000, using [bus 00-ff]
[    2.308755] in pci_add_resource_offset res->start 0   offset 0
[    2.308774]    IO 0xe0000000..0xe00fffff -> 0x00000000
[    2.308795] in pci_add_resource_offset res->start 0   offset 0
[    2.308805]   MEM 0xe0100000..0xeeffffff -> 0xe0100000
[    2.308824] in pci_add_resource_offset res->start e0100000    offset 0
[    2.308834] nwl-pcie fd0e0000.pcie: invalid resource [bus 00-ff]
[    2.308870] nwl-pcie fd0e0000.pcie: invalid resource [mem 0xe0100000-0xeeffffff]
[    2.308979] nwl-pcie fd0e0000.pcie: PCI host bridge to bus 0000:00
[    2.308998] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.309014] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
[    2.309030] pci_bus 0000:00: root bus resource [mem 0xe0100000-0xeeffffff]
[    2.309253] pci 0000:00:00.0: cannot attach to SMMU, is it on the same bus?
[    2.309269] iommu: Adding device 0000:00:00.0 to group 1
[    2.309625] pci 0000:01:00.0: cannot attach to SMMU, is it on the same bus?
[    2.309641] iommu: Adding device 0000:01:00.0 to group 1
[    2.309697] pci 0000:00:00.0: BAR 8: assigned [mem 0xe0100000-0xe02fffff]
[    2.309718] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0100000-0xe01fffff 64bit]
[    2.309752] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit]
[    2.309784] pci 0000:01:00.0: BAR 4: no space for [io  size 0x0040]
[    2.309800] pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0040]
[    2.309816] pci 0000:00:00.0: PCI bridge to [bus 01-0c]
[    2.309833] pci 0000:00:00.0:   bridge window [mem 0xe0100000-0xe02fffff]

Here is the output of ioports and iomem:

root@:~# cat /proc/iomem
00000000-7fffffff : System RAM
  00080000-00a76fff : Kernel code
  01c72000-01d4bfff : Kernel data
fd0c0000-fd0c1fff : /amba/ahci@fd0c0000
fd0e0000-fd0e0fff : breg
fd480000-fd480fff : pcireg
ff000000-ff000fff : xuartps
ff010000-ff010fff : xuartps
ff020000-ff020fff : /amba/i2c@ff020000
ff030000-ff030fff : /amba/i2c@ff030000
ff070000-ff070fff : /amba/can@ff070000
ff0a0000-ff0a0fff : /amba/gpio@ff0a0000
ff0f0000-ff0f0fff : /amba/spi@ff0f0000
ff170000-ff170fff : mmc0
ffa60000-ffa600ff : /amba/rtc@ffa60000
8000000000-8000ffffff : cfg
root@:~# cat /proc/ioports
root@:~#

/proc/ioports is empty.

Thanks & Regards,
Bharat


This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux