On Tue, Jul 12, 2016 at 06:20:18PM +0900, Christoph Hellwig wrote:
> Set the affinity_mask in the PCI device before allocating vectors so that
> the affinity can be propagated through the MSI descriptor structures to
> the core IRQ code. To facilitate this new __pci_enable_msi_range and
> __pci_enable_msix_range helpers are factored out of their not prefixed
> variants which assigning the new irq affinity mask in the PCI device
> so that the low-level interrupt code can perform the interrupt affinity
> assignment and do node-local allocations.
>
> A new PCI_IRQ_NOAFFINITY flag is added to pci_alloc_irq_vectors so that
> this function can also be used by drivers that don't wish to use the
> automatic affinity assignment.
>
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> ---
> Documentation/PCI/MSI-HOWTO.txt | 3 +
> drivers/pci/msi.c | 127 ++++++++++++++++++++++++++--------------
> include/linux/pci.h | 2 +
> 3 files changed, 89 insertions(+), 43 deletions(-)
>
> diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
> index 0af91e8..16e9187 100644
> --- a/Documentation/PCI/MSI-HOWTO.txt
> +++ b/Documentation/PCI/MSI-HOWTO.txt
> @@ -97,6 +97,9 @@ The flags argument should normally be set to 0, but can be used to pass the
> PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
> MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
> case the device does not support legacy interrupt lines.
> +By default this function will spread the interrupts around the available
> +CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
> +flag.
>
> To get the Linux IRQ numbers passed to request_irq and free_irq
> and the vectors use the following function:
> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 00657bf..692deff 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -569,6 +569,7 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
> entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
> entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
> entry->nvec_used = nvec;
> + entry->affinity = dev->irq_affinity;
>
> if (control & PCI_MSI_FLAGS_64BIT)
> entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
> @@ -680,10 +681,18 @@ static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries)
> static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
> struct msix_entry *entries, int nvec)
> {
> + const struct cpumask *mask = NULL;
> struct msi_desc *entry;
> - int i;
> + int cpu = -1, i;
>
> for (i = 0; i < nvec; i++) {
> + if (dev->irq_affinity) {
> + cpu = cpumask_next(cpu, dev->irq_affinity);
> + if (cpu >= nr_cpu_ids)
> + cpu = cpumask_first(dev->irq_affinity);
> + mask = cpumask_of(cpu);
> + }
> +
> entry = alloc_msi_entry(&dev->dev);
> if (!entry) {
> if (!i)
> @@ -703,6 +712,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
> entry->msi_attrib.default_irq = dev->irq;
> entry->mask_base = base;
> entry->nvec_used = 1;
> + entry->affinity = mask;
>
> list_add_tail(&entry->list, dev_to_msi_list(&dev->dev));
> }
> @@ -1028,19 +1038,8 @@ int pci_msi_enabled(void)
> }
> EXPORT_SYMBOL(pci_msi_enabled);
>
> -/**
> - * pci_enable_msi_range - configure device's MSI capability structure
> - * @dev: device to configure
> - * @minvec: minimal number of interrupts to configure
> - * @maxvec: maximum number of interrupts to configure
> - *
> - * This function tries to allocate a maximum possible number of interrupts in a
> - * range between @minvec and @maxvec. It returns a negative errno if an error
> - * occurs. If it succeeds, it returns the actual number of interrupts allocated
> - * and updates the @dev's irq member to the lowest new interrupt number;
> - * the other interrupt numbers allocated to this device are consecutive.
> - **/
> -int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
> +static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
> + unsigned int flags)
> {
> int nvec;
> int rc;
> @@ -1068,20 +1067,77 @@ int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
> else if (nvec > maxvec)
> nvec = maxvec;
>
> - do {
> + for (;;) {
> + if (!(flags & PCI_IRQ_NOAFFINITY)) {
> + dev->irq_affinity = irq_create_affinity_mask(&nvec);
> + if (nvec < minvec)
> + return -ENOSPC;
> + }
> +
> rc = msi_capability_init(dev, nvec);
> - if (rc < 0) {
> + if (rc == 0)
> + return nvec;
> +
> + kfree(dev->irq_affinity);
> + dev->irq_affinity = NULL;
> +
> + if (rc < 0)
> return rc;
> - } else if (rc > 0) {
> - if (rc < minvec)
> + if (rc < minvec)
> + return -ENOSPC;
> + nvec = rc;
> + }
> +}
> +
> +/**
> + * pci_enable_msi_range - configure device's MSI capability structure
> + * @dev: device to configure
> + * @minvec: minimal number of interrupts to configure
> + * @maxvec: maximum number of interrupts to configure
> + *
> + * This function tries to allocate a maximum possible number of interrupts in a
> + * range between @minvec and @maxvec. It returns a negative errno if an error
> + * occurs. If it succeeds, it returns the actual number of interrupts allocated
> + * and updates the @dev's irq member to the lowest new interrupt number;
> + * the other interrupt numbers allocated to this device are consecutive.
> + **/
> +int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
> +{
> + return __pci_enable_msi_range(dev, minvec, maxvec, PCI_IRQ_NOAFFINITY);
> +}
> +EXPORT_SYMBOL(pci_enable_msi_range);
> +
> +static int __pci_enable_msix_range(struct pci_dev *dev,
> + struct msix_entry *entries, int minvec, int maxvec,
> + unsigned int flags)
> +{
> + int nvec = maxvec;
> + int rc;
> +
> + if (maxvec < minvec)
> + return -ERANGE;
> +
> + for (;;) {
> + if (!(flags & PCI_IRQ_NOAFFINITY)) {
> + dev->irq_affinity = irq_create_affinity_mask(&nvec);
> + if (nvec < minvec)
> return -ENOSPC;
> - nvec = rc;
> }
> - } while (rc);
>
> - return nvec;
> + rc = pci_enable_msix(dev, entries, nvec);
> + if (rc == 0)
> + return nvec;
> +
> + kfree(dev->irq_affinity);
> + dev->irq_affinity = NULL;
> +
> + if (rc < 0)
> + return rc;
> + if (rc < minvec)
> + return -ENOSPC;
> + nvec = rc;
> + }
> }
> -EXPORT_SYMBOL(pci_enable_msi_range);
>
> /**
> * pci_enable_msix_range - configure device's MSI-X capability structure
> @@ -1099,26 +1155,10 @@ EXPORT_SYMBOL(pci_enable_msi_range);
> * with new allocated MSI-X interrupts.
> **/
> int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries,
> - int minvec, int maxvec)
> + int minvec, int maxvec)
> {
> - int nvec = maxvec;
> - int rc;
> -
> - if (maxvec < minvec)
> - return -ERANGE;
> -
> - do {
> - rc = pci_enable_msix(dev, entries, nvec);
> - if (rc < 0) {
> - return rc;
> - } else if (rc > 0) {
> - if (rc < minvec)
> - return -ENOSPC;
> - nvec = rc;
> - }
> - } while (rc);
> -
> - return nvec;
> + return __pci_enable_msix_range(dev, entries, minvec, maxvec,
> + PCI_IRQ_NOAFFINITY);
> }
> EXPORT_SYMBOL(pci_enable_msix_range);
>
> @@ -1145,13 +1185,14 @@ int pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
> int vecs = -ENOSPC;
>
> if (!(flags & PCI_IRQ_NOMSIX)) {
> - vecs = pci_enable_msix_range(dev, NULL, min_vecs, max_vecs);
> + vecs = __pci_enable_msix_range(dev, NULL, min_vecs, max_vecs,
> + flags);
> if (vecs > 0)
> return vecs;
> }
>
> if (!(flags & PCI_IRQ_NOMSI)) {
> - vecs = pci_enable_msi_range(dev, min_vecs, max_vecs);
> + vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, flags);
> if (vecs > 0)
> return vecs;
> }
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 52ecd49..f140661 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -320,6 +320,7 @@ struct pci_dev {
> * directly, use the values stored here. They might be different!
> */
> unsigned int irq;
> + struct cpumask *irq_affinity;
> struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
>
> bool match_driver; /* Skip attaching driver */
> @@ -1240,6 +1241,7 @@ int pci_set_vga_state(struct pci_dev *pdev, bool decode,
> #define PCI_IRQ_NOLEGACY (1 << 0) /* don't use legacy interrupts */
> #define PCI_IRQ_NOMSI (1 << 1) /* don't use MSI interrupts */
> #define PCI_IRQ_NOMSIX (1 << 2) /* don't use MSI-X interrupts */
> +#define PCI_IRQ_NOAFFINITY (1 << 3) /* don't auto-assign affinity */
>
> /* kmem_cache style wrapper around pci_alloc_consistent() */
>
> --
> 2.1.4
>
With, or without my -else nit:
Reviewed-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
