From: Dong Bo <dongbo4@xxxxxxxxxx> In designware PCIe driver, the iatu0 is used for both CFG and IO accesses. When sending CFGs to peripherals (e.g. lspci), iatu0 frequently switches between CFG and IO alternatively. A MEMORY probably be sent as an IOs by mistake. Considering the following configurations: MEMORY -> BASE_ADDR: 0xb4100000, LIMIT: 0xb4100FFF, TYPE=mem CFG -> BASE_ADDR: 0xb4000000, LIMIT: 0xb4000FFF, TYPE=cfg IO -> BASE_ADDR: 0xFFFFFFFF, LIMIT: 0xFFFFFFFE, TYPE=io Suppose PCIe has just completed a CFG access, to switch back to IO, it set the BASE_ADDR to 0xFFFFFFFF, LIMIT 0xFFFFFFFE and TYPE to io. When another CFG comes, the BASE_ADDR is set to 0xb4000000 to switch to CFG. At this moment, a MEMORY access shows up, since it matches with iatu0 (due to 0xb4000000 <= MEMORY BASE_ADDR <= MEMORY LIMIE <= 0xFFFFFFF), it is treated as an IO access by mistake, then sent to perpheral. This patch fixes the problem by exchanging the assignments of `MEMORYs' and `CFGs/IOs', which assigning MEMEORYs to iatu0, CFGs and IOs to iatu1. Signed-off-by: Dong Bo <dongbo4@xxxxxxxxxx> --- drivers/pci/host/pcie-designware.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index aafd766..1bd88d9 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -599,11 +599,11 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, va_cfg_base = pp->va_cfg1_base; } - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, type, cpu_addr, busdev, cfg_size); ret = dw_pcie_cfg_read(va_cfg_base + where, size, val); - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, PCIE_ATU_TYPE_IO, pp->io_base, pp->io_bus_addr, pp->io_size); @@ -636,11 +636,11 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, va_cfg_base = pp->va_cfg1_base; } - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, type, cpu_addr, busdev, cfg_size); ret = dw_pcie_cfg_write(va_cfg_base + where, size, val); - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, PCIE_ATU_TYPE_IO, pp->io_base, pp->io_bus_addr, pp->io_size); @@ -779,7 +779,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp) * we should not program the ATU here. */ if (!pp->ops->rd_other_conf) - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0, PCIE_ATU_TYPE_MEM, pp->mem_base, pp->mem_bus_addr, pp->mem_size); -- 1.9.1 . -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
