Hi Dongdong,
On 06/13/2016 09:02 AM, Dongdong Liu wrote:
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index d3c3e85..49612b3 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -22,6 +22,10 @@
> #include <linux/kernel.h>
> #include <linux/pci.h>
> #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
> +
> +/* Root pointer to the mapped MCFG table */
> +static struct acpi_table_mcfg *mcfg_table;
>
> /* Structure to hold entries from the MCFG table */
> struct mcfg_entry {
> @@ -35,6 +39,38 @@ struct mcfg_entry {
> /* List to save mcfg entries */
> static LIST_HEAD(pci_mcfg_list);
>
> +extern struct pci_cfg_fixup __start_acpi_mcfg_fixups[];
> +extern struct pci_cfg_fixup __end_acpi_mcfg_fixups[];
> +
> +struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root)
> +{
> + int bus_num = root->secondary.start;
> + int domain = root->segment;
> + struct pci_cfg_fixup *f;
> +
> + if (!mcfg_table)
> + return &pci_generic_ecam_ops;
> +
> + /*
> + * Match against platform specific quirks and return corresponding
> + * CAM ops.
> + *
> + * First match against PCI topology <domain:bus> then use OEM ID and
> + * OEM revision from MCFG table standard header.
> + */
> + for (f = __start_acpi_mcfg_fixups; f < __end_acpi_mcfg_fixups; f++) {
> + if ((f->domain == domain || f->domain == PCI_MCFG_DOMAIN_ANY) &&
> + (f->bus_num == bus_num || f->bus_num == PCI_MCFG_BUS_ANY) &&
> + (!strncmp(f->oem_id, mcfg_table->header.oem_id,
> + ACPI_OEM_ID_SIZE)) &&
> + (!strncmp(f->oem_table_id, mcfg_table->header.oem_table_id,
> + ACPI_OEM_TABLE_ID_SIZE)))
This would just be a small convenience, but if the character count used here were
min(strlen(f->oem_id), ACPI_OEM_ID_SIZE)
then the parameters to DECLARE_ACPI_MCFG_FIXUP macro could be substrings and
wouldn't need to be padded out to the full length.
> + return f->ops;
> + }
> + /* No quirks, use ECAM */
> + return &pci_generic_ecam_ops;
> +}
> diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
> index 7d63a66..088a1da 100644
> --- a/include/linux/pci-acpi.h
> +++ b/include/linux/pci-acpi.h
> @@ -25,6 +25,7 @@ static inline acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev)
> extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
>
> extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
> +extern struct pci_ecam_ops *pci_mcfg_get_ops(struct acpi_pci_root *root);
>
> static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
> {
> @@ -72,6 +73,25 @@ struct acpi_pci_root_ops {
> int (*prepare_resources)(struct acpi_pci_root_info *info);
> };
>
> +struct pci_cfg_fixup {
> + struct pci_ecam_ops *ops;
> + char *oem_id;
> + char *oem_table_id;
> + int domain;
> + int bus_num;
> +};
> +
> +#define PCI_MCFG_DOMAIN_ANY -1
> +#define PCI_MCFG_BUS_ANY -1
> +
> +/* Designate a routine to fix up buggy MCFG */
> +#define DECLARE_ACPI_MCFG_FIXUP(ops, oem_id, oem_table_id, dom, bus) \
> + static const struct pci_cfg_fixup \
> + __mcfg_fixup_##oem_id##oem_table_id##dom##bus \
I'm not entirely sure that this is the right fix--I'm pretty blindly
following a GCC documentation suggestion [1]--but removing the first two
preprocessor concatenation operators "##" solved the following build error
for me.
include/linux/pci-acpi.h:90:2: error: pasting "__mcfg_fixup_" and ""QCOM"" does not give a valid preprocessing token
__mcfg_fixup_##oem_id##oem_table_id##dom##bus \
^
arch/arm64/kernel/pci.c:225:1: note: in expansion of macro ‘DECLARE_ACPI_MCFG_FIXUP’
DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
^
arch/arm64/kernel/pci.c:225:44: error: pasting ""QCOM"" and ""QDF2432"" does not give a valid preprocessing token
DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
^
include/linux/pci-acpi.h:90:17: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
__mcfg_fixup_##oem_id##oem_table_id##dom##bus \
^
arch/arm64/kernel/pci.c:225:52: error: pasting ""QDF2432"" and "PCI_MCFG_DOMAIN_ANY" does not give a valid preprocessi
ng token
DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
^
include/linux/pci-acpi.h:90:25: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
__mcfg_fixup_##oem_id##oem_table_id##dom##bus \
^
arch/arm64/kernel/pci.c:225:44: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before string constant
DECLARE_ACPI_MCFG_FIXUP(&pci_32b_ecam_ops, "QCOM", "QDF2432", PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
^
include/linux/pci-acpi.h:90:17: note: in definition of macro ‘DECLARE_ACPI_MCFG_FIXUP’
__mcfg_fixup_##oem_id##oem_table_id##dom##bus \
^
make[1]: *** [arch/arm64/kernel/pci.o] Error 1
make: *** [arch/arm64/kernel] Error 2
1. https://gcc.gnu.org/onlinedocs/cpp/Concatenation.html#Concatenation
> + __used __attribute__((__section__(".acpi_fixup_mcfg"), \
> + aligned((sizeof(void *))))) = \
> + { ops, oem_id, oem_table_id, dom, bus };
> +
> extern int acpi_pci_probe_root_resources(struct acpi_pci_root_info *info);
> extern struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
> struct acpi_pci_root_ops *ops,
>
Thanks,
Cov
--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
