The PCI hardware on imx6 requires the following clocks: "pcie", "pcie_bus" and "pcie_phy", so add the missing clocks in the clock-names property. Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> --- Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 83aeb1f..94ab92c 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -10,8 +10,8 @@ Required properties: entry for each entry in the interrupt-names property. - interrupt-names: Must include the following entries: - "msi": The interrupt that is asserted when an MSI is received -- clock-names: Must include the following additional entries: - - "pcie_phy" +- clock-names: Must include the following entries: + - "pcie", "pcie_bus" and "pcie_phy". Optional properties: - fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
