On Mon, May 30, 2016 at 05:14:22PM +0200, Tomasz Nowicki wrote:
> This patch implements pci_acpi_scan_root call so that ARM64 can start
> using ACPI to setup and enumerate PCI buses.
>
> The implementation of pci_acpi_scan_root() looks up config space regions
> through MCFG interface. Then ECAM library is doing a new mapping
> and attach generic ECAM ops which are used for accessing config space.
>
> On ARM64, ACPI and DT can be enabled together, and in that case
> we need to use generic domains. In order to do that we implement
> ARM64 specific way of retrieving domain number from pci_config_window
> structure.
>
> Since we enable PCI for ACPI we need to implement raw_pci_{read|write}
> at the same time. ARM64 provides RAW accessors as long as there is
> correlated valid pci_bus structure, but not before.
I think this is important and needs to be spelled out a little more
explicitly using the terms from the ACPI spec so it will make sense to
people like BIOS writers who might be bitten by this.
"raw_pci_read()" is a Linux term that won't mean anything to them.
But they might expect that AML can access PCI config space before the
Linux driver claims the host bridge, and I think you're saying that
will not work.
> Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
> Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx>
> ---
> arch/arm64/Kconfig | 2 +
> arch/arm64/kernel/pci.c | 120 ++++++++++++++++++++++++++++++++++++++++++++++--
> include/linux/pci.h | 5 ++
> 3 files changed, 122 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 76747d9..87c48ad 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -3,6 +3,7 @@ config ARM64
> select ACPI_CCA_REQUIRED if ACPI
> select ACPI_GENERIC_GSI if ACPI
> select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> + select ACPI_MCFG if ACPI
> select ARCH_HAS_DEVMEM_IS_ALLOWED
> select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> select ARCH_HAS_ELF_RANDOMIZE
> @@ -96,6 +97,7 @@ config ARM64
> select OF_EARLY_FLATTREE
> select OF_NUMA if NUMA && OF
> select OF_RESERVED_MEM
> + select PCI_ECAM if ACPI
> select PERF_USE_VMALLOC
> select POWER_RESET
> select POWER_SUPPLY
> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
> index 3663be1..39f2a40 100644
> --- a/arch/arm64/kernel/pci.c
> +++ b/arch/arm64/kernel/pci.c
> @@ -17,7 +17,9 @@
> #include <linux/mm.h>
> #include <linux/of_pci.h>
> #include <linux/of_platform.h>
> +#include <linux/pci.h>
> #include <linux/pci-acpi.h>
> +#include <linux/pci-ecam.h>
> #include <linux/slab.h>
>
> /*
> @@ -71,13 +73,21 @@ int pcibios_alloc_irq(struct pci_dev *dev)
> int raw_pci_read(unsigned int domain, unsigned int bus,
> unsigned int devfn, int reg, int len, u32 *val)
> {
> - return -ENXIO;
> + struct pci_bus *b = pci_find_bus(domain, bus);
> +
> + if (!b)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + return b->ops->read(b, devfn, reg, len, val);
> }
>
> int raw_pci_write(unsigned int domain, unsigned int bus,
> unsigned int devfn, int reg, int len, u32 val)
> {
> - return -ENXIO;
> + struct pci_bus *b = pci_find_bus(domain, bus);
> +
> + if (!b)
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + return b->ops->write(b, devfn, reg, len, val);
> }
I think these functions could be under #ifdef ACPI, couldn't they?
I see x86 and ia64 don't do that, and they do call them from non-ACPI
places. So maybe there'd be no point in doing it differently here.
You could split this out into a separate patch, though, which would be
a nice way to highlight the issue of AML access before pci_root.c
claims the bridge.
> #ifdef CONFIG_NUMA
> @@ -91,11 +101,111 @@ EXPORT_SYMBOL(pcibus_to_node);
> #endif
>
> #ifdef CONFIG_ACPI
> -/* Root bridge scanning */
> +
> +struct acpi_pci_generic_root_info {
> + struct acpi_pci_root_info common;
> + struct pci_config_window *cfg; /* config space mapping */
> +};
> +
> +int acpi_pci_bus_domain_nr(struct pci_bus *bus)
> +{
> + struct pci_config_window *cfg = bus->sysdata;
> + struct acpi_device *adev = to_acpi_device(cfg->parent);
> + struct acpi_pci_root *root = acpi_driver_data(adev);
> +
> + return root->segment;
> +}
> +
> +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> +{
> + if (!acpi_disabled) {
> + struct pci_config_window *cfg = bridge->bus->sysdata;
> + struct acpi_device *adev = to_acpi_device(cfg->parent);
> + ACPI_COMPANION_SET(&bridge->dev, adev);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Lookup the bus range for the domain in MCFG, and set up config space
> + * mapping.
> + */
> +static int pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root,
> + struct acpi_pci_generic_root_info *ri)
Maybe return the "struct pci_config_window *" and do the assignment in
the caller? Then I don't think you'd have to pass in "ri".
> +{
> + struct resource *bus_res = &root->secondary;
> + u16 seg = root->segment;
> + struct pci_config_window *cfg;
> + struct resource cfgres;
> + unsigned int bsz;
> + int err;
> +
> + err = pci_mcfg_lookup(root);
> + if (err) {
> + pr_err("%04x:%pR MCFG region not found\n", seg, bus_res);
dev_err()
> + return err;
> + }
> +
> + bsz = 1 << pci_generic_ecam_ops.bus_shift;
> + cfgres.start = root->mcfg_addr + bus_res->start * bsz;
> + cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
> + cfgres.flags = IORESOURCE_MEM;
> + cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
> + &pci_generic_ecam_ops);
> + if (IS_ERR(cfg)) {
> + pr_err("%04x:%pR error %ld mapping CAM\n", seg, bus_res,
> + PTR_ERR(cfg));
dev_err()
> + return PTR_ERR(cfg);
> + }
> +
> + ri->cfg = cfg;
> + return 0;
> +}
> +
> +/* release_info: free resrouces allocated by init_info */
> +static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
> +{
> + struct acpi_pci_generic_root_info *ri;
> +
> + ri = container_of(ci, struct acpi_pci_generic_root_info, common);
> + pci_ecam_free(ri->cfg);
> + kfree(ri);
> +}
> +
> +static struct acpi_pci_root_ops acpi_pci_root_ops = {
> + .release_info = pci_acpi_generic_release_info,
> +};
> +
> +/* Interface called from ACPI code to setup PCI host controller */
> struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> {
> - /* TODO: Should be revisited when implementing PCI on ACPI */
> - return NULL;
> + int node = acpi_get_node(root->device->handle);
> + struct acpi_pci_generic_root_info *ri;
> + struct pci_bus *bus, *child;
> + int err;
> +
> + ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
> + if (!ri)
> + return NULL;
> +
> + err = pci_acpi_setup_ecam_mapping(root, ri);
> + if (err)
> + return NULL;
> +
> + acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
> + bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
> + ri->cfg);
> + if (!bus)
> + return NULL;
> +
> + pci_bus_size_bridges(bus);
> + pci_bus_assign_resources(bus);
> +
> + list_for_each_entry(child, &bus->children, node)
> + pcie_bus_configure_settings(child);
> +
> + return bus;
> }
>
> void pcibios_add_bus(struct pci_bus *bus)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 9661c85..f66d188 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1390,7 +1390,12 @@ static inline int pci_domain_nr(struct pci_bus *bus)
> {
> return bus->domain_nr;
> }
> +/* Arch specific ACPI hook to set-up domain number */
> +#ifdef CONFIG_ACPI
> +int acpi_pci_bus_domain_nr(struct pci_bus *bus);
> +#else
> static inline int acpi_pci_bus_domain_nr(struct pci_bus *bus) { return -1; }
> +#endif
> void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent);
> #else
> static inline void pci_bus_assign_domain_nr(struct pci_bus *bus,
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
