This series of patches need corresponding changes in firmware side to fully function. Without the firmware changes, the PCI hotplug driver won't detect and populate any PCI slots. So the code changes are compatible to old firmware. The firmware patches can be found from: https://patchwork.ozlabs.org/patch/624317/ The series of patches is highlighted as below: * In order to create PE during PCI hot plugging, pcibios_setup_bridge() which is called to update bridge's window populates the PE, together with the associated resources like IO/M32/M64 segments, DMA windows etc. * One refcount is maintained by each PE to track the number of PCI devices that are associated with the PE. The refcount is increased by one when a new PCI device joins the PE. It is decreased by one when a PCI device is released (pcibios_release_device()). The PE together with the used resources will be destroyed when refcount reaches to 0, meaning no PCI device needs the PE any more. * If the firmware has capability to support PCI slot and reset functionality, the reset required by EEH recovery is routed to firmware. Otherwise, it is done in kernel as before. * PCI hotplug driver for PowerNV platform. The PCI slots are identified by firmware and exposed to kernel through device tree. Firmware provides APIs to get presence/power state or set power state from/to PCI slot. The PCI slot hotplug state is sychronized with its power state. When user changes PCI slot power state from off to on through sysfs file, the PCI devices behind the PCI slot will be brought into online. Otherwise, the PCI slot's subordinate devices will be removed from the system. Changelog ========= v10: * Rebased to linux-next where the prerequisite patches merged to. * Drop FDT patches that have been merged to linux-next. * Export pnv_pci_get_slot_id() for CAPI driver to use in future. * Use asynchronous message, the driver is simplifed greatly. No need to have workqueue and synchronization mechanism for it. * Fixed build warning/error when IOMMU_API is disabled. v9: * Rebased to linux-powerpc next branch + (A). * Patch order, split and merge (Alexey / Alistair) * Lots of misc comments covered, I don't elaborate them one by one (Alexey) * One more patch to export detach_of_node() * Fixed uninitialized variables, memory leak on @fdt1. Added flush_work() and other misc comments (Alexey / Alistair) * Same testing scenario carried as v8. More will be carried out later. * The confused function names aren't changed. Will check with Alexey and Alistair. Or have a separate patch to address it later. v8: * Rebased to linux-powerpc next branch. * Resolve comments from Alexey and Daniel on PCI part * Resolve comments from Rob on fdt.c * Retested (refer to the "Testing section") v7: * Reworked revision to some extent. * Rebased to powerpc/next repository. * Reorder/split/merge/drop according - Alexey. * Defined macros and use array to track IO/M32/M64/DMA32 segments - Alexey. * Merged 3 files to one for the hotplug driver - Alexey. * As part of OPAL API, defined macros for PCI slot power state, hotplug message type. Defined macros for PCI slot power confirmed state in hotplug driver. * Misc comments from Alexey. * Reworked unflatten_dt_node() to avoid recursive function calls. * Use EXPORT_SYMBOL_GPL() and document function's input/output - Rob/Frank. v6: * Patch reorder, split, squash - Alexey. * Minor coding style - Alexey. * Better function names for pcibios_{add,remove}_pci_devices - Bjorn * Replace pr_warn() with dev_warn() in PowerNV hotplug driver - Bjorn * Concurrent depth as parameter passed to __unflatten_dt_node() - Grant / Alexey * Replace overlay with of_changeset - Grant Gavin Shan (18): PCI: Add pcibios_setup_bridge() powerpc/pci: Override pcibios_setup_bridge() powerpc/powernv: Remove PCI_RESET_DELAY_US powerpc/powernv: Move pnv_pci_ioda_setup_opal_tce_kill() around powerpc/powernv: Increase PE# capacity powerpc/powernv: Allocate PE# in reverse order powerpc/powernv: Create PEs in pcibios_setup_bridge() powerpc/powernv: Setup PE for root bus powerpc/powernv: Extend PCI bridge resources powerpc/powernv: Make pnv_ioda_deconfigure_pe() visible powerpc/powernv: Dynamically release PE powerpc/pci: Update bridge windows on PCI plug powerpc/pci: Delay populating pdn powerpc/powernv: Support PCI slot ID powerpc/powernv: Use PCI slot reset infrastructure powerpc/powernv: Introduce pnv_pci_get_slot_id() powerpc/powernv: Functions to get/set PCI slot state PCI/hotplug: PowerPC PowerNV PCI hotplug driver MAINTAINERS | 1 + arch/powerpc/include/asm/eeh.h | 2 +- arch/powerpc/include/asm/opal-api.h | 19 +- arch/powerpc/include/asm/opal.h | 10 +- arch/powerpc/include/asm/pci-bridge.h | 2 + arch/powerpc/include/asm/pnv-pci.h | 12 + arch/powerpc/include/asm/ppc-pci.h | 2 - arch/powerpc/kernel/eeh_dev.c | 17 +- arch/powerpc/kernel/pci-common.c | 16 +- arch/powerpc/kernel/pci_dn.c | 23 +- arch/powerpc/platforms/maple/pci.c | 34 +- arch/powerpc/platforms/pasemi/pci.c | 3 - arch/powerpc/platforms/powermac/pci.c | 38 +- arch/powerpc/platforms/powernv/eeh-powernv.c | 49 +- arch/powerpc/platforms/powernv/opal-wrappers.S | 4 + arch/powerpc/platforms/powernv/pci-ioda.c | 484 +++++++++++----- arch/powerpc/platforms/powernv/pci.c | 124 ++++- arch/powerpc/platforms/powernv/pci.h | 10 +- arch/powerpc/platforms/pseries/setup.c | 6 +- drivers/pci/hotplug/Kconfig | 13 + drivers/pci/hotplug/Makefile | 3 + drivers/pci/hotplug/pnv_php.c | 733 +++++++++++++++++++++++++ drivers/pci/setup-bus.c | 5 + include/linux/pci.h | 1 + 24 files changed, 1397 insertions(+), 214 deletions(-) create mode 100644 drivers/pci/hotplug/pnv_php.c -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
