Add a generic ACPI based PCI host controller, and provide a config
option ACPI_PCI_HOST_GENERIC to enable it.
The implementation selects PCI_GENERIC_ECAM and uses functions from
drivers/pci/ecam.h to create and access ECAM mappings. It also selects
PCI_MMCONFIG and implements the pci_mmcfg_late_init() function to parse
and map entries in the MCFG table.
The implementation of pci_acpi_scan_root() looks up the saved mappings
and sets up a new mapping if needed. Generic PCI functions are used for
accessing config space.
Signed-off-by: Jayachandran C <jchandra@xxxxxxxxxxxx>
---
drivers/acpi/Kconfig | 9 ++
drivers/acpi/Makefile | 1 +
drivers/acpi/pci_gen_host.c | 258 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 268 insertions(+)
create mode 100644 drivers/acpi/pci_gen_host.c
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 82b96ee..f178f2e 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -343,6 +343,15 @@ config ACPI_PCI_SLOT
i.e., segment/bus/device/function tuples, with physical slots in
the system. If you are unsure, say N.
+config ACPI_PCI_HOST_GENERIC
+ bool "Generic ACPI based PCI controller"
+ depends on ARM64
+ select PCI_MMCONFIG
+ select PCI_GENERIC_ECAM
+ help
+ Say Y if you want the generic ACPI based PCI controller
+ implementation.
+
config X86_PM_TIMER
bool "Power Management Timer Support" if EXPERT
depends on X86
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index edeb2d1..eaf429c 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ACPI_BUTTON) += button.o
obj-$(CONFIG_ACPI_FAN) += fan.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o
+obj-$(CONFIG_ACPI_PCI_HOST_GENERIC) += pci_gen_host.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
obj-$(CONFIG_ACPI) += container.o
obj-$(CONFIG_ACPI_THERMAL) += thermal.o
diff --git a/drivers/acpi/pci_gen_host.c b/drivers/acpi/pci_gen_host.c
new file mode 100644
index 00000000..bd31faa
--- /dev/null
+++ b/drivers/acpi/pci_gen_host.c
@@ -0,0 +1,258 @@
+/*
+ * Copyright 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License version 2 (GPLv2) for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 (GPLv2) along with this source code.
+ */
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/sfi_acpi.h>
+#include <linux/slab.h>
+
+#include "../pci/ecam.h"
+
+#define PREFIX "ACPI: "
+
+/*
+ * Array of config windows from MCFG table, parsed and created by
+ * pci_mmcfg_late_init() at boot
+ */
+struct pci_config_window **cfgarr;
+
+/* ACPI info for generic ACPI PCI controller */
+struct acpi_pci_generic_root_info {
+ struct acpi_pci_root_info common;
+ struct pci_config_window *cfg; /* config space mapping */
+ bool mcfg_added;
+};
+
+/* find the entry in cfgarr which contains range bus_start..bus_end */
+static int mcfg_lookup(u16 seg, u8 bus_start, u8 bus_end)
+{
+ struct pci_config_window *cfg;
+ int i;
+
+ if (!cfgarr)
+ return -ENOENT;
+
+ for (i = 0; cfgarr[i]; i++) {
+ cfg = cfgarr[i];
+ if (seg != cfg->domain)
+ continue;
+ if (bus_start >= cfg->bus_start && bus_start <= cfg->bus_end)
+ return (bus_end <= cfg->bus_end) ? i : -EINVAL;
+ else if (bus_end >= cfg->bus_start && bus_end <= cfg->bus_end)
+ return -EINVAL;
+ }
+ return -ENOENT;
+}
+
+/*
+ * create a new mapping
+ */
+static struct pci_config_window *pci_acpi_ecam_create(struct device *dev,
+ phys_addr_t addr, u16 seg, u8 bus_start, u8 bus_end)
+{
+ struct pci_config_window *cfg;
+ int ret;
+
+ cfg = pci_generic_ecam_create(dev, addr, bus_start, bus_end,
+ &pci_generic_ecam_default_ops);
+ if (IS_ERR(cfg)) {
+ ret = PTR_ERR(cfg);
+ pr_err("%04x:%02x-%02x error %d mapping CAM\n", seg,
+ bus_start, bus_end, ret);
+ return NULL;
+ }
+ cfg->domain = seg;
+ return cfg;
+}
+
+/*
+ * Lookup the bus range for the domain in MCFG, and set up config space
+ * mapping.
+ */
+static int pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root,
+ struct acpi_pci_generic_root_info *ri)
+{
+ struct pci_config_window *cfg;
+ u16 seg = root->segment;
+ u8 bus_start = root->secondary.start;
+ u8 bus_end = root->secondary.end;
+ phys_addr_t addr = root->mcfg_addr;
+ struct acpi_device *adev = root->device;
+ int ret;
+
+ ret = mcfg_lookup(seg, bus_start, bus_end);
+ if (ret == -ENOENT) {
+ if (addr == 0) {
+ pr_err("%04x:%02x-%02x mcfg lookup failed\n", seg,
+ bus_start, bus_end);
+ return ret;
+ }
+ cfg = pci_acpi_ecam_create(&adev->dev, addr, seg, bus_start,
+ bus_end);
+ if (!cfg)
+ return ret;
+ } else if (ret < 0) {
+ pr_err("%04x:%02x-%02x bus range error (%d)\n", seg, bus_start,
+ bus_end, ret);
+ return ret;
+ } else {
+ cfg = cfgarr[ret];
+ if (addr == 0)
+ addr = cfg->cfgaddr;
+ if (bus_start != cfg->bus_start) {
+ pr_err("%04x:%02x-%02x bus range mismatch %02x\n",
+ seg, bus_start, bus_end, cfg->bus_start);
+ return -EINVAL;
+ }
+ if (addr != cfg->cfgaddr) {
+ pr_warn("%04x:%02x-%02x addr mismatch, ignoring MCFG\n",
+ seg, bus_start, bus_end);
+ } else if (bus_end != cfg->bus_end) {
+ pr_warn("%04x:%02x-%02x bus end mismatch using %02x\n",
+ seg, bus_start, bus_end, cfg->bus_end);
+ bus_end = cfg->bus_end;
+ }
+ }
+ ri->cfg = cfg;
+ ri->mcfg_added = (ret >= 0);
+
+ return 0;
+}
+
+/* release_info: free resrouces allocated by init_info */
+static void pci_acpi_generic_release_info(struct acpi_pci_root_info *ci)
+{
+ struct acpi_pci_generic_root_info *ri;
+
+ ri = container_of(ci, struct acpi_pci_generic_root_info, common);
+ if (!ri->mcfg_added)
+ pci_generic_ecam_free(ri->cfg);
+ kfree(ri);
+}
+
+static struct acpi_pci_root_ops acpi_pci_root_ops = {
+ .release_info = pci_acpi_generic_release_info,
+};
+
+/* Interface called from ACPI code to setup PCI host controller */
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+ int node = acpi_get_node(root->device->handle);
+ struct acpi_pci_generic_root_info *ri;
+ struct pci_bus *bus, *child;
+ int err;
+
+ ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
+ if (!ri)
+ return NULL;
+
+ err = pci_acpi_setup_ecam_mapping(root, ri);
+ if (err)
+ return NULL;
+
+ acpi_pci_root_ops.pci_ops = &ri->cfg->ops->ops;
+ bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
+ ri->cfg);
+ if (!bus)
+ return NULL;
+
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+
+ return bus;
+}
+
+/* handle MCFG table entries */
+static __init int handle_mcfg(struct acpi_table_header *header)
+{
+ struct acpi_table_mcfg *mcfg;
+ struct acpi_mcfg_allocation *mptr;
+ struct pci_config_window *cfg;
+ int i, j, n;
+
+ if (!header)
+ return -EINVAL;
+
+ mcfg = (struct acpi_table_mcfg *)header;
+ mptr = (struct acpi_mcfg_allocation *) &mcfg[1];
+ n = (header->length - sizeof(*mcfg)) / sizeof(*mptr);
+ if (n <= 0 || n > 255) {
+ pr_err(PREFIX " MCFG has incorrect entries (%d).\n", n);
+ return -EINVAL;
+ }
+
+ cfgarr = kcalloc(n + 1, sizeof(*cfgarr), GFP_KERNEL);
+ if (!cfgarr)
+ return -ENOMEM;
+
+ for (i = 0, j = 0; i < n; i++) {
+ cfg = pci_acpi_ecam_create(NULL, mptr->address,
+ mptr->pci_segment, mptr->start_bus_number,
+ mptr->end_bus_number);
+ if (!cfg)
+ continue;
+ cfgarr[j++] = cfg;
+ }
+
+ if (j == 0) {
+ kfree(cfgarr);
+ cfgarr = NULL;
+ return -ENOENT;
+ }
+ cfgarr[j] = NULL;
+ return 0;
+}
+
+/* Interface called by ACPI - parse and save MCFG table */
+void __init pci_mmcfg_late_init(void)
+{
+ int i, err;
+
+ err = acpi_sfi_table_parse(ACPI_SIG_MCFG, handle_mcfg);
+ if (err) {
+ pr_err(PREFIX " Failed to parse MCFG (%d)\n", err);
+ } else if (cfgarr == NULL) {
+ pr_err(PREFIX " Failed to parse MCFG, no valid entries.\n");
+ } else {
+ for (i = 0; cfgarr[i]; i++)
+ ;
+ pr_info(PREFIX " MCFG table at loaded, %d entries\n", i);
+ }
+}
+
+/* Raw operations, works only for MCFG entries with an associated bus */
+int raw_pci_read(unsigned int domain, unsigned int busn, unsigned int devfn,
+ int reg, int len, u32 *val)
+{
+ struct pci_bus *bus = pci_find_bus(domain, busn);
+
+ if (!bus)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return bus->ops->read(bus, devfn, reg, len, val);
+}
+
+int raw_pci_write(unsigned int domain, unsigned int busn, unsigned int devfn,
+ int reg, int len, u32 val)
+{
+ struct pci_bus *bus = pci_find_bus(domain, busn);
+
+ if (!bus)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ return bus->ops->write(bus, devfn, reg, len, val);
+}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
