Tim Harvey <tharvey@xxxxxxxxxxxxx> writes: > It's not too easy to tell how many IMX6 boards incorrectly specify > their reset-gpio polarity. I don't know what the best way to determine > what boards use the IMX6 pcie host controller. Is there a dtc usage > that will display the compiled dtb's then we grep out 'compatible = > "fsl,imx6q-pcie"' to at least get the list of boards to inspect? I'm > curious if its just one or two boards that incorrectly specify the > polarity of their PCI reset. I guess, maybe 8 of them. Not counting those with out-of-tree DTS/DTB files. Something like: $ grep reset-gpio arch/arm/boot/dts/imx6* | grep -v phy-reset > I figured out it was the change to enable CONFIG_PCI_MSI in v4.5 that > is causing interrupts to fail for me. Right, a long standing issue. MSI never worked for me on i.MX6. -- Krzysztof Halasa Industrial Research Institute for Automation and Measurements PIAP Al. Jerozolimskie 202, 02-486 Warsaw, Poland -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
