On Fri, Mar 11, 2016 at 06:30:29PM -0600, Bjorn Helgaas wrote:
> On Mon, Feb 29, 2016 at 02:56:04PM +0200, Mika Westerberg wrote:
> > Add back runtime PM support for PCIe ports that was removed in
> > commit fe9a743a2601 ("PCI/PM: Drop unused runtime PM support code for PCIe
> > ports").
> >
> > First of all we cannot enable it automatically for all root ports since
> > there have been problems previously,
>
> Pointers to these problems would be useful.
Right, sorry about that.
Runtime PM for PCIe ports was disabled by commit de7d5f729c72 ("PCI/PM:
Disable runtime PM of PCIe ports"). Changelog in that commit says that
runtime suspending of ports might prevent things like hotplug from
working. The bug report it refers is here:
https://bugzilla.kernel.org/show_bug.cgi?id=53811
I can add these to the changelog as well.
> > so we enable it only based on per port
> > configuration (runtime_suspend_allowed).
>
> I see that the next patch basically adds a quirk to set
> runtime_suspend_allowed for Sunrisepoint. How do we prevent this
> from being a maintenance nightmare? I don't want to have to add
> a quirk for every new device that supports runtime PM.
One alternative is to do the same that patch [3/6] does for system
suspend and use cut-off date.
As far as I can tell Windows added RTD3 (runtime D3, similart to our
runtime PM) support for PCIe ports quite recently so I would expect
recent hardware to be better validated against that.
> > Furthermore we need to check that
> > the device, if wake capable, can do so from D3cold (which is the state it
> > goes after the root port is powered down).
>
> I don't see this check. I was expecting something like
> device_may_wakeup(&pdev->dev) && !pci_pme_capable(pdev, PCI_D3cold)
> like you did in the "Move PCIe ports to D3hot during suspend" patch.
This patch actually uses pcie_port_can_suspend() introduced in patch
[3/6] which does the check.
> > This follows what we did for
> > PCIe port system suspend already.
> >
> > Runtime PM is still blocked and needs to be unblocked from userspace like
> > with other PCI devices.
>
> Can you expand on this a bit? I assume you mean that runtime PM is
> disabled by default, and userspace has to enable it with a sysfs switch or
> something? Can you include information about how to do that?
That's right. I'm calling it "unblock" to avoid confusion with "enable"
as if runtime PM is merely enabled nothing happens until someone calls
pm_runtime_allow() (or does the same from userspace).
Here is the script I've been using:
-----8<-----8<-----8<-----8<------8<-----8<-----8<------
#!/bin/sh
PORTS=$(lspci -D | grep "PCI bridge" | cut -f 1 -d ' ')
# Enable runtime PM for all ports
for port in $PORTS; do
# Enable runtime PM for all connected devices
for device in /sys/bus/pci/devices/$port/????:??:??.?; do
echo auto > $device/power/control
done
# Then for the port itself
echo auto > /sys/bus/pci/devices/$port/power/control
done
-----8<-----8<-----8<-----8<------8<-----8<-----8<------
I will include that in the changelog as well.
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > ---
> > drivers/pci/pcie/portdrv_pci.c | 49 ++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 49 insertions(+)
> >
> > diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
> > index fe3349685141..eb0f425f51cc 100644
> > --- a/drivers/pci/pcie/portdrv_pci.c
> > +++ b/drivers/pci/pcie/portdrv_pci.c
> > @@ -85,6 +85,7 @@ enum pcie_port_type {
> >
> > struct pcie_port_config {
> > bool suspend_allowed;
> > + bool runtime_suspend_allowed;
> > };
> >
> > static const struct pcie_port_config pcie_port_configs[] = {
> > @@ -154,6 +155,11 @@ static bool pcie_port_suspend_allowed(struct pci_dev *pdev)
> > return pcie_port_can_suspend(pdev);
> > }
> >
> > +static bool pcie_port_runtime_suspend_allowed(struct pci_dev *pdev)
> > +{
> > + return pcie_port_get_config(pdev)->runtime_suspend_allowed;
> > +}
> > +
> > static int pcie_port_suspend_noirq(struct device *dev)
> > {
> > struct pci_dev *pdev = to_pci_dev(dev);
> > @@ -188,6 +194,34 @@ static int pcie_port_resume_noirq(struct device *dev)
> > return 0;
> > }
> >
> > +static int pcie_port_runtime_suspend(struct device *dev)
> > +{
> > + struct pci_dev *pdev = to_pci_dev(dev);
> > +
> > + /*
> > + * All devices behind the port are assumed to be in D3cold so
> > + * update their state now.
> > + */
> > + __pci_bus_set_current_state(pdev->subordinate, PCI_D3cold);
> > + return 0;
> > +}
> > +
> > +static int pcie_port_runtime_resume(struct device *dev)
> > +{
> > + return 0;
> > +}
> > +
> > +static int pcie_port_runtime_idle(struct device *dev)
> > +{
> > + struct pci_dev *pdev = to_pci_dev(dev);
> > +
> > + if (pcie_port_can_suspend(pdev)) {
> > + pm_schedule_suspend(dev, 10);
> > + return 0;
> > + }
> > + return -EBUSY;
> > +}
> > +
> > static const struct dev_pm_ops pcie_portdrv_pm_ops = {
> > .suspend = pcie_port_device_suspend,
> > .resume = pcie_port_device_resume,
> > @@ -197,12 +231,20 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
> > .restore = pcie_port_device_resume,
> > .suspend_noirq = pcie_port_suspend_noirq,
> > .resume_noirq = pcie_port_resume_noirq,
> > + .runtime_suspend = pcie_port_runtime_suspend,
> > + .runtime_resume = pcie_port_runtime_resume,
> > + .runtime_idle = pcie_port_runtime_idle,
> > };
> >
> > #define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
> >
> > #else /* !PM */
> >
> > +static inline bool pcie_port_runtime_suspend_allowed(struct pci_dev *pdev)
> > +{
> > + return false;
> > +}
> > +
> > #define PCIE_PORTDRV_PM_OPS NULL
> > #endif /* !PM */
> >
> > @@ -230,11 +272,18 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
> > return status;
> >
> > pci_save_state(dev);
> > +
> > + if (pcie_port_runtime_suspend_allowed(dev))
> > + pm_runtime_put_noidle(&dev->dev);
> > +
> > return 0;
> > }
> >
> > static void pcie_portdrv_remove(struct pci_dev *dev)
> > {
> > + if (pcie_port_runtime_suspend_allowed(dev))
> > + pm_runtime_get_noresume(&dev->dev);
> > +
> > pcie_port_device_remove(dev);
> > }
> >
> > --
> > 2.7.0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
