It is not neccessary to check for PCI_EXP_TYPE in sriov_init(). There appears to be no reason for the check.
Some AMD GPUs have hardware support for grapics SRIOV.
If the GPU has a display output then the GPU needs to support Legacy VGA operation.
If CLASS_CODE = VGA then the device should have a Port Type = Legacy EndPoint.
Therefore in order to enable SRIOV on a GPU with a display output, LEGACY_END_POINT is supported as a valid Port Type by removing the check for Port Type.
Patch is also logged in Bugzilla #112221
Signed-off-by: Kelly Zytaruk <kelly.zytaruk@xxxxxxx>
---
drivers/pci/iov.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 31f31d4..fe4bd0a 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -387,10 +387,6 @@ static int sriov_init(struct pci_dev *dev, int pos)
struct resource *res;
struct pci_dev *pdev;
- if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END &&
- pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT)
- return -ENODEV;
-
pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
if (ctrl & PCI_SRIOV_CTRL_VFE) {
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
