Re: [PATCH v5 3/3] pci, pci-thunder-ecam: Add driver for ThunderX-pass1 on-chip devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 08, 2016 at 01:39:21PM -0800, David Daney wrote:
> On 02/08/2016 01:12 PM, Rob Herring wrote:
> >On Mon, Feb 8, 2016 at 2:47 PM, David Daney <ddaney@xxxxxxxxxxxxxxxxxx> wrote:
> >>On 02/08/2016 11:56 AM, Rob Herring wrote:
> >>>On Fri, Feb 05, 2016 at 03:41:15PM -0800, David Daney wrote:
> >>>>From: David Daney <david.daney@xxxxxxxxxx>
> >
> >[...]
> >
> >>>>+Properties of the host controller node that differ from
> >>>>+host-generic-pci.txt:
> >>>>+
> >>>>+- compatible     : Must be "cavium,pci-host-thunder-ecam"
> >>>>+
> >>>>+Example:
> >>>>+
> >>>>+       pci@84b0,00000000 {
> >>>
> >>>
> >>>Drop the comma,
> >>
> >>
> >>OK...
> >>
> >>>and the node name should be "pcie".
> >>>
> >>
> >>Why pcie?
> >>
> >>There are no PCIe devices or buses reachable from this type of root complex.
> >>There are however many PCI devices.
> >
> >I thought ECAM is a PCIe thing. If not, then nevermind.

The "ECAM" confusion bites again :)

> Well, Enhanced Configuration Access Mechanism (ECAM) is defined  the
> the PCI Express(R) base Specification, but it just defines a
> standard layout of address bits to memory map config space
> operations.  Since the PCI config space is a sub set of the PCIe
> config space, ECAM can also be used in PCI systems.
> 
> Really, it is a bit of a gray area here as we don't have any bridges
> to PCIe buses and there are multiple devices residing on each bus,
> so from that point of view it cannot be PCIe.  There are, however,
> devices that implement the PCI Express Capability structure, so does
> that make it PCIe?  It is not clear what the specifications demand
> here.

The PCI core doesn't care about the node name in the device tree.  But
it *does* care about some details of PCI/PCIe topology.  We consider
anything with a PCIe capability to be PCIe.  For example,

  - pci_cfg_space_size() thinks PCIe devices have 4K of config space

  - only_one_child() thinks a PCIe bus, i.e., a link, only has a
    single device on it

  - a PCIe device should have a PCIe Root Port or PCIe Downstream Port
    upstream from it (we did remove some of these restrictions with
    b35b1df5e6c2 ("PCI: Tolerate hierarchies with no Root Port"), but 
    it's possible we didn't get them all)

I assume your system conforms to expectations like these; I'm just
pointing them out because you mentioned buses with multiple devices on
them, which is definitely something one doesn't expect in PCIe.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux