> -----Original Message----- > From: Arnd Bergmann [mailto:arnd@xxxxxxxx] > Sent: 08 February 2016 13:48 > To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: Gabriele Paoloni; Guohanjun (Hanjun Guo); Wangzhou (B); liudongdong > (C); Linuxarm; qiujiang; bhelgaas@xxxxxxxxxx; > Lorenzo.Pieralisi@xxxxxxx; tn@xxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx; xuwei (O); linux-acpi@xxxxxxxxxxxxxxx; > jcm@xxxxxxxxxx; zhangjukuo; Liguozhu (Kenneth) > Subject: Re: [RFC PATCH v2 2/3] PCI: hisi: Make the HiSilicon PCIe host > controller ECAM compliant > > On Monday 08 February 2016 12:41:03 Gabriele Paoloni wrote: > > From: gabriele paoloni <gabriele.paoloni@xxxxxxxxxx> > > > > This patch modifies the current Hip05/Hip06 PCIe host controller > > driver to make it ECAM compliant. This is needed in preparation > > for the ACPI based driver to allow both DT and ACPI drivers to > > use the same BIOS (that configure the Designware iATUs). > > > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@xxxxxxxxxx> > > Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx> > > > > Doesn't this break backwards compatibility? Well Hip05/Hip06 SoCs are used into evaluation boards For the Estuary project. https://github.com/hisilicon/estuary As this new driver gets upstream we'll merge this new driver into estuary and release a new version of the firmware to support it. > > I think you need to use a new compatible string in the firmware > if you change the register layout, and then change the driver > to support both the old and the new layout. You are right, for some reason in this patchset I missed the Documentation update that I posted in the previous one, i.e.: --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -23,8 +23,8 @@ Optional properties: Hip05 Example (note that Hip06 is the same except compatible): pcie@0xb0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; - reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; - reg-names = "rc_dbi", "config"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00100000 0 0x0f00000>; + reg-names = "rc_dbi", "ecam-cfg"; I will fix this in v3 Thanks Gab > > Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
