[+cc Yinghai] On Mon, Feb 01, 2016 at 08:18:35AM +0300, Олег Мороз wrote: > Okay. I've started from driver level printk > results are: > > On 4.2 > > [414006.575989] Before pci_enable_device IRQ 20 > > [414006.575991] After pci_enable_device IRQ 20 > > [414006.575997] Before pci_enable_device IRQ 21 > > [414006.575999] After pci_enable_device IRQ 21 > > on 4.3 > > [ 114.862289] Before pci_enable_device IRQ 5 > > [ 114.862303] After pci_enable_device IRQ 5 > > [ 114.862316] Before pci_enable_device IRQ 5 > > [ 114.862326] After pci_enable_device IRQ 5 > > I've got two cards, because of that pci_enable_device() calls twice. Did you try booting with pci=routeirq as Yinghai suggested? That's not a fix, but if it does make things work, it may give us an idea for how to fix it correctly. > On Friday 29 of January 2016 10:31:59 Bjorn Helgaas wrote: > > On Thu, Jan 28, 2016 at 10:28:14PM +0300, Мороз Олег wrote: > > > What i need to print out at first order? > > > > Jiang, can you chime in here? > > > > 991de2e59090 is related to IRQs, so I'd start by printing dev->irq in your > > driver before and after you call pci_enable_device(). Add some printks in > > pcibios_alloc_irq() and pcibios_enable_device() just to confirm that we got > > there and when, e.g., add lines like this: > > > > dev_info(&dev->dev, "%s\n", __func__); > > > > Bjorn > > > > > 27 янв. 2016 г. 16:22 пользователь Bjorn Helgaas <helgaas@xxxxxxxxxx> > написал: > > > > On Wed, Jan 27, 2016 at 12:38:06PM +0300, Мороз Олег wrote: > > > > > Also, my drive has no > > > > > > > > > > pcibios_enable_device() > > > > > pcibios_alloc_irq() > > > > > > > > > > calls. > > > > > > > > Those are internal interfaces used by the PCI core. Drivers shouldn't > > > > call them directly. Drivers normally call pci_enable_device(), and > > > > those internal interfaces are used in that path. > > > > > > > > > 26.01.2016 22:05, Олег Мороз пишет: > > > > > >I confirmed it works in > > > > > > > > > > > >890e4847587f > > > > > > > > > > > >and do not works in > > > > > > > > > > > >991de2e59090 > > > > > > > > > > > >26.01.2016 18:32, Bjorn Helgaas пишет: > > > > > >>[+cc Jiang] > > > > > >> > > > > > >>On Mon, Jan 25, 2016 at 03:52:51PM -0600, Bjorn Helgaas wrote: > > > > > >>>Hi Олег, > > > > > >>> > > > > > >>>On Sun, Jan 24, 2016 at 04:50:08PM +0300, Олег Мороз wrote: > > > > > >>>>Okay. I've sent logs (dmesg and lspci) from both 4.2 and 4.3 > > > > > >>>>to bugzilla > > > > > >>> > > > > > >>>I don't see anything wrong in either log. Both v4.2 and v4.3 > > > > > >>>enumerate the device the same way, and the driver seems to claim it > > > > > >>>the same way: > > > > > >>> > > > > > >>> pci 0000:0d:00.0: [10b5:9030] type 00 class 0x078000 > > > > > >>> pci 0000:0d:00.0: reg 0x14: [io 0x2100-0x217f] > > > > > >>> pci 0000:0d:00.0: reg 0x18: [io 0x2380-0x239f] > > > > > >>> pci 0000:0d:00.0: PME# supported from D0 D3hot > > > > > >>> pci 0000:0d:01.0: [10b5:9030] type 00 class 0x078000 > > > > > >>> pci 0000:0d:01.0: reg 0x14: [io 0x2180-0x21ff] > > > > > >>> pci 0000:0d:01.0: reg 0x18: [io 0x23a0-0x23bf] > > > > > >>> pci 0000:0d:01.0: PME# supported from D0 D3hot > > > > > >>> pci 0000:0d:02.0: [10b5:9030] type 00 class 0x078000 > > > > > >>> pci 0000:0d:02.0: reg 0x14: [io 0x2200-0x227f] > > > > > >>> pci 0000:0d:02.0: reg 0x18: [io 0x2280-0x22ff] > > > > > >>> pci 0000:0d:02.0: reg 0x1c: [io 0x2300-0x237f] > > > > > >>> pci 0000:0d:02.0: PME# supported from D0 D3hot > > > > > >>> > > > > > >>> sja1000_plx_pci 0000:0d:02.0: Detected "Eclus CAN-200-PCI" > > > > > >>>card at slot #2 > > > > > >>> sja1000_plx_pci 0000:0d:02.0: Channel #1 at > > > > > >>>0x0000000000012280, irq 22 registered as can0 > > > > > >>> sja1000_plx_pci 0000:0d:02.0: Channel #2 at > > > > > >>>0x0000000000012300, irq 22 registered as can1 > > > > > >>> sja1000_plx_pci 0000:0d:02.0 can0: setting BTR0=0x03 BTR1=0x37 > > > > > >>> > > > > > >>>One option is always to bisect between v4.2 and v4.3 to see which > > > > > >>>commit made it stop working. See > > > > > >>>https://git-scm.com/docs/git-bisect > > > > > >> > > > > > >>Jiang, Олег bisected this to 991de2e59090 ("PCI, x86: Implement > > > > > >>pcibios_alloc_irq() and pcibios_free_irq()"). > > > > > >> > > > > > >>Олег, please double-check and confirm that 890e4847587f works and > > > > > >>991de2e59090 fails. > > > > > >> > > > > > >>Then please add some printks in the pcibios_enable_device() and > > > > > >>pcibios_alloc_irq() paths and in your driver to see exactly what > > > > > >>changed > > > > > >>between 890e4847587f and 991de2e59090 > > > > > >> > > > > > >>Bjorn > > > > > >> > > > > > >>>>23.01.2016 17:54, Bjorn Helgaas пишет: > > > > > >>>>>[+cc linux-kernel] > > > > > >>>>> > > > > > >>>>>Hi Олег, > > > > > >>>>> > > > > > >>>>>On Sat, Jan 23, 2016 at 1:08 AM, Олег Мороз > > > > > >>>>> > > > > > >>>>><oleg.moroz@xxxxxxxxxxxxx> wrote: > > > > > >>>>>>Hello. I've got a device driver for MIL-1553b card > > > > > >>>>>>called TA1-PCI, which > > > > > >>>>>>could be found at > > > > > >>>>>>https://github.com/qmor/elcus-1553-driver-linux > > > > > >>>>>>Card is using PLX_PCI9030 PCI controller. > > > > > >>>>>>Today i've found that this driver compiles, installes, > > > > > >>>>>>but is not working as > > > > > >>>>>>it should. > > > > > >>>>>>Looks like it not receives any interrupts from PCI. I've > > > > > >>>>>>test it again with > > > > > >>>>>>kernel > > > > > >>>>>>4.2 and it works okay. What changes was made in PCI > > > > > >>>>>>subsystem from 4.2 to > > > > > >>>>>>4.3 > > > > > >>>>>>which could have impact this driver work. > > > > > >>>>> > > > > > >>>>>Thank you very much for this problem report. There were many PCI > > > > > >>>>>changes between v4.2 and v4.3, and without more information, I > > > > > >>>>>can't > > > > > >>>>>guess what might be causing this problem. > > > > > >>>>> > > > > > >>>>>I opened a bug report at > > > > > >>>>>https://bugzilla.kernel.org/show_bug.cgi?id=111211 > > > > > >>>>> > > > > > >>>>>Please attach complete dmesg logs for both v4.2 and v4.3 to that > > > > > >>>>>bug > > > > > >>>>>report. Also, please attach the complete "lspci -vv" output (as > > > > > >>>>>root). > > > > > >>>>> > > > > > >>>>>Thanks! > > > > > >>>>> > > > > > >>>>>Bjorn > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
