The settings in GPR8 are dependent upon the particular layout of the
hardware platform. As such, they should be configurable via the device
tree.
As many boards have been using the default values, this implementation
uses the old values if they are not specified in the device tree.
Signed-off-by: Justin Waters <justin.waters@xxxxxxxxxxx>
---
.../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 7 ++++
drivers/pci/host/pci-imx6.c | 42 +++++++++++++++++++---
2 files changed, 44 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index 6fbba53..3be80c6 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -13,6 +13,13 @@ Required properties:
- clock-names: Must include the following additional entries:
- "pcie_phy"
+Optional properties:
+- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
+- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
+- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+
Example:
pcie@0x01000000 {
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index 230ebf9..cc04497 100644
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -39,6 +39,11 @@ struct imx6_pcie {
struct pcie_port pp;
struct regmap *iomuxc_gpr;
void __iomem *mem_base;
+ u32 tx_deemph_gen1;
+ u32 tx_deemph_gen2_3p5db;
+ u32 tx_deemph_gen2_6db;
+ u32 tx_swing_full;
+ u32 tx_swing_low;
};
/* PCIe Root Complex registers (memory-mapped) */
@@ -317,15 +322,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp)
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
+ IMX6Q_GPR8_TX_DEEMPH_GEN1,
+ imx6_pcie->tx_deemph_gen1 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+ imx6_pcie->tx_deemph_gen2_3p5db << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+ imx6_pcie->tx_deemph_gen2_6db << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
+ IMX6Q_GPR8_TX_SWING_FULL,
+ imx6_pcie->tx_swing_full << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
+ IMX6Q_GPR8_TX_SWING_LOW,
+ imx6_pcie->tx_swing_low << 25);
}
static int imx6_pcie_wait_for_link(struct pcie_port *pp)
@@ -565,6 +575,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
struct imx6_pcie *imx6_pcie;
struct pcie_port *pp;
struct resource *dbi_base;
+ struct device_node *node = pdev->dev.of_node;
int ret;
imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
@@ -617,6 +628,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->iomuxc_gpr);
}
+ /* Grab PCIe PHY Tx Settings */
+ if (of_property_read_u32
+ (node, "fsl,tx-deemph-gen1", &imx6_pcie->tx_deemph_gen1))
+ imx6_pcie->tx_deemph_gen1 = 0;
+
+ if (of_property_read_u32
+ (node, "fsl,tx-deemph-gen2-3p5db", &imx6_pcie->tx_deemph_gen2_3p5db))
+ imx6_pcie->tx_deemph_gen2_3p5db = 0;
+
+ if (of_property_read_u32
+ (node, "fsl,tx-deemph-gen2-6db", &imx6_pcie->tx_deemph_gen2_6db))
+ imx6_pcie->tx_deemph_gen2_6db = 20;
+
+ if (of_property_read_u32
+ (node, "fsl,tx-swing-full", &imx6_pcie->tx_swing_full))
+ imx6_pcie->tx_swing_full = 127;
+
+ if (of_property_read_u32
+ (node, "fsl,tx-swing-low", &imx6_pcie->tx_swing_low))
+ imx6_pcie->tx_swing_low = 127;
+
ret = imx6_add_pcie_port(pp, pdev);
if (ret < 0)
return ret;
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
