Re: [RFC PATCH 1/2] PCI: pciehp: Merge hotplug work requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 01/08/2016 09:46 AM, Bjorn Helgaas wrote:
On Fri, Jan 08, 2016 at 08:30:30AM -0800, Guenter Roeck wrote:
On 01/08/2016 08:18 AM, Bjorn Helgaas wrote:
Hi Guenter,

Sorry for the delay in getting to this.

On Mon, Nov 02, 2015 at 07:48:15PM -0800, Guenter Roeck wrote:
Some oddball devices may experience a PCIe link flap after power-on.
This may result in the following sequence of events.

fpc0 kernel: pciehp 0000:02:08.0:pcie24: Card present on Slot(0)
fpc0 kernel: pciehp 0000:02:08.0:pcie24: slot(0): Link Up event
fpc0 kernel: pciehp 0000:02:08.0:pcie24:
	Link Up event ignored on slot(0): already powering on
fpc0 kernel: pciehp 0000:02:08.0:pcie24: slot(0): Link Down event
fpc0 kernel: pciehp 0000:02:08.0:pcie24:
	Link Down event queued on slot(0): currently getting powered on
fpc0 kernel: pciehp 0000:02:08.0:pcie24: slot(0): Link Up event
fpc0 kernel: pciehp 0000:02:08.0:pcie24:
	Link Up event queued on slot(0): currently getting powered off

This causes the driver for affected devices to be instantiated, removed,
and re-instantiated.

An even worse problem is a device which resets itself continuously.
This can result in the following endless sequence of messages.

pciehp 0000:02:0a.0:pcie24: Card present on Slot(10)
pciehp 0000:02:0a.0:pcie24: Card not present on Slot(10)
pciehp 0000:02:0a.0:pcie24: Card present on Slot(10)
pciehp 0000:02:0a.0:pcie24: Card not present on Slot(10)
pciehp 0000:02:0a.0:pcie24: Card present on Slot(10)
pciehp 0000:02:0a.0:pcie24: Card not present on Slot(10)

The problem in the both cases is that all events are enqueued as hotplug
work requests and executed in sequence, which can overwhelm the system
and even result in "hung task" tracebacks in pciehp_power_thread().

This exposes an underlying limitation of the hotplug state machine: It
executes all received requests, even though only the most recent request
really needs to be handled. As a result, by the time a request is handled,
it may well be obsolete and have been superseded by many other enable /
disable requests which have been enqueued in the meantime.

To solve the problem, fold hotplug work requests into a single request.
Store the request as well as the work data structure in 'struct slot',
thus eliminating the need to allocate memory for each request.
Handle a sequence of requests by setting a 'disable' flag when needed,
indicating that a link needs to be disabled prior to re-enabling it.

With this change, requests and request sequences are handled as follows.

enable (single request):		enable link
disable (single request):		disable link
... disable-enable-disable...disable:	disable link
... disable-enable-disable...enable:	disable link, then enable it

I think this is a really good idea, but I would like to understand
what the critical points are and how they affect the state machine.

I think you're basically accounting for the fact that some hotplug
controller commands are not completed instantaneously, and we might
receive more interrupts before the first command is completed.  I
suspect that your patch only makes a difference on controllers that
support Command Completed events, right?

No, not really. problem is that state change interrupts are not handled
immediately but enqueued. By the time an event is handled by the workqueue,
it is long since obsolete and superseded by other events.

Ah.  So the important interval is the one between pcie_isr(), where we
enqueue work, and the worker threads that are awakened to actually do
the work.  Then the idea is that only the most recent state is
important -- if we have several presence detect changes, e.g.,
present, absent, present, absent, before the worker thread starts
processing them, it should only look at the most recent state.  That
seems like the right thing to me, and I think the removal of kmalloc
from the ISR path is an important consequence of doing that.

Yes, exactly.

Blue sky thinking:

   - Do all interrupt-related CSR reads in pcie_isr() (as opposed to
     doing some in pcie_isr() and others in the worker threads).  I
     think this is important for consistency.  I think it's a mistake
     to read and clear the status register in pcie_isr(), then go back
     and read other CSRs later in the worker threads.

   - Have pcie_isr() update a single set of "current state" CSR values.
     This means we don't need any allocation in pcie_isr().  Some
     values, e.g., Power Fault Detected, might be OR-d in.  Others,
     e.g., Presence Detect, might overwrite the previous value.

   - Collapse the several worker threads into a single one that
     pcie_isr() would awaken (as opposed to having pcie_isr() decide
     whether this is a button press, presence detect change, link
     event, etc.)

   - Have the single worker thread figure out what happened and how to
     advance the state machine, based on the CSR values read by the
     most recent pcie_isr() invocation.

This would be a lot of changes, but I think it has the potential to
centralize the state machine management and simplify things
significantly.

That all makes a lot of sense, and I would love to spend some time on it.
Unfortunately, I don't think I will be able to spend much time on this
anytime soon.

Any chance to accept at least the first of my two patches ? Or, in other
words, do you see an immediate problem with it that I could address in,
say, the next week or two ?

Thanks,
Guenter

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux