Hi, Booting linux-next 20151202 on a mx6qsabresd board with an Intel 7260 Wifi PCI card connected I see: [ 0.255013] PCI host bridge /soc/pcie@0x01000000 ranges: [ 0.255033] No bus range found for /soc/pcie@0x01000000, using [bus 00-ff] [ 0.255085] err 0x01f00000..0x01f7ffff -> 0x01f00000 [ 0.255123] IO 0x01f80000..0x01f8ffff -> 0x00000000 [ 0.255202] MEM 0x01000000..0x01efffff -> 0x01000000 [ 0.370288] imx6q-pcie 1ffc000.pcie: PCI host bridge to bus 0000:00 [ 0.370314] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.370333] pci_bus 0000:00: root bus resource [??? 0x01f00000-0x01f7ffff flags 0x0] [ 0.370349] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.370365] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 0.370488] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 0.370553] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.370590] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.370780] pci 0000:00:00.0: supports D1 [ 0.370797] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.371570] PCI: bus0: Fast back to back transfers disabled [ 0.371989] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000 [ 0.372214] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 0.372747] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.386266] PCI: bus1: Fast back to back transfers disabled [ 0.386498] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 0.386528] pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x011fffff] [ 0.386548] pci 0000:00:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref] [ 0.386573] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x01101fff 64bit] [ 0.386650] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.386672] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff] [ 0.387370] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.387390] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.387413] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded Is there anything we should do to avoid the following messages? [ 0.255033] No bus range found for /soc/pcie@0x01000000, using [bus 00-ff] and [ 0.370333] pci_bus 0000:00: root bus resource [??? 0x01f00000-0x01f7ffff flags 0x0 or is this all OK? Please advise. Thanks, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
