On Thu, Sep 24, 2015 at 10:59:50AM -0500, Jay Cornwall wrote:
> The PCIe 3.0 AtomicOp (6.15) feature allows atomic transctions to be requested
> by, routed through and completed by PCIe components. Routing and completion
> do not require software support. Component support for each is detectable via
> the DEVCAP2 register.
>
> AtomicOp requests are permitted only if a component's
> DEVCTL2.ATOMICOP_REQUESTER_ENABLE field is set. This capability cannot be
> detected but is a no-op if set on a component with no support. These requests
> can only be serviced if the upstream components support AtomicOp completion
> and/or routing to a component which does.
>
> A concrete example is the AMD Fiji-class GPU, which is specified to support
> AtomicOp requests, routed through a PLX 8747 switch (advertising AtomicOp
> routing) to a Haswell host bridge (advertising AtomicOp completion support).
> When AtomicOp requests are disabled the GPU logs attempts to initiate requests
> to an MMIO register for debugging.
>
> Add pci_enable_atomic_request for per-device control over AtomicOp requests.
> Upstream bridges are checked for AtomicOp routing capability and the call
> fails if any lack this capability. The root port is checked for AtomicOp
> completion capabilities and the call fails if it does not support any.
> Routes to other PCIe components are not checked for AtomicOp routing and
> completion capabilities.
>
> v2: Check for AtomicOp route to root port with AtomicOp completion
> v3: Style fixes
>
> Signed-off-by: Jay Cornwall <jay@xxxxxxxxxxxx>
Hi Jay,
Is there a user for this new functionality? I don't like to add things
that have no apparent user.
Bjorn
> ---
> drivers/pci/pci.c | 70 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/pci.h | 1 +
> include/uapi/linux/pci_regs.h | 5 ++++
> 3 files changed, 76 insertions(+)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 6a9a111..edc56e4 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -2453,6 +2453,76 @@ bool pci_acs_path_enabled(struct pci_dev *start,
> }
>
> /**
> + * pci_enable_atomic_request - enable or disable AtomicOp requester
> + * @dev: the PCI device
> + *
> + * Return 0 if the device is capable of generating AtomicOp requests,
> + * all upstream bridges support AtomicOp routing, and the root port supports
> + * 32-bit, 64-bit and/or 128-bit AtomicOp completion, or negative otherwise.
> + */
> +int pci_enable_atomic_request(struct pci_dev *dev)
> +{
> + struct pci_bus *bus = dev->bus;
> +
> + if (!pci_is_pcie(dev))
> + return -EINVAL;
> +
> + switch (pci_pcie_type(dev)) {
> + /*
> + * PCIe 3.0, 6.15 specifies that endpoints and root ports are permitted
> + * to implement AtomicOp requester capabilities.
> + */
> + case PCI_EXP_TYPE_ENDPOINT:
> + case PCI_EXP_TYPE_LEG_END:
> + case PCI_EXP_TYPE_RC_END:
> + case PCI_EXP_TYPE_ROOT_PORT:
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + while (bus->parent) {
> + struct pci_dev *bridge = bus->self;
> + u32 cap;
> +
> + pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &cap);
> +
> + switch (pci_pcie_type(bridge)) {
> + /*
> + * Upstream, downstream and root ports may implement AtomicOp
> + * routing capabilities. AtomicOp routing via a root port is
> + * not considered.
> + */
> + case PCI_EXP_TYPE_UPSTREAM:
> + case PCI_EXP_TYPE_DOWNSTREAM:
> + if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTING))
> + return -EINVAL;
> + break;
> +
> + /*
> + * Root ports are permitted to implement AtomicOp completion
> + * capabilities.
> + */
> + case PCI_EXP_TYPE_ROOT_PORT:
> + if (!(cap & (PCI_EXP_DEVCAP2_ATOMIC_COMP32 |
> + PCI_EXP_DEVCAP2_ATOMIC_COMP64 |
> + PCI_EXP_DEVCAP2_ATOMIC_COMP128)))
> + return -EINVAL;
> + break;
> + }
> +
> +
> + bus = bus->parent;
> + }
> +
> + pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
> + PCI_EXP_DEVCTL2_ATOMICOP_REQ);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(pci_enable_atomic_request);
> +
> +/**
> * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
> * @dev: the PCI device
> * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index e90eb22..4e50003 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1801,6 +1801,7 @@ void pci_request_acs(void);
> bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
> bool pci_acs_path_enabled(struct pci_dev *start,
> struct pci_dev *end, u16 acs_flags);
> +int pci_enable_atomic_request(struct pci_dev *dev);
>
> #define PCI_VPD_LRDT 0x80 /* Large Resource Data Type */
> #define PCI_VPD_LRDT_ID(x) ((x) | PCI_VPD_LRDT)
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index 413417f..013c2bd 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -571,6 +571,10 @@
> */
> #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
> #define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
> +#define PCI_EXP_DEVCAP2_ATOMIC_ROUTING 0x00000040 /* AtomicOp routing */
> +#define PCI_EXP_DEVCAP2_ATOMIC_COMP32 0x00000080 /* 32b AtomicOp completion */
> +#define PCI_EXP_DEVCAP2_ATOMIC_COMP64 0x00000100 /* 64b AtomicOp completion */
> +#define PCI_EXP_DEVCAP2_ATOMIC_COMP128 0x00000200 /* 128b AtomicOp completion*/
> #define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */
> #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
> #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
> @@ -578,6 +582,7 @@
> #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
> #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */
> #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */
> +#define PCI_EXP_DEVCTL2_ATOMICOP_REQ 0x0040 /* Allow AtomicOp requests */
> #define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
> #define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
> #define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
